Click to zoom in
ICON 57872EP is a pair of rear Vehicle Specific 2.5 Aluminum Series remote-reservoir shocks for the 2025-2026 Toyota 4Runner with zero to three inches of rear lift. Compression Damping Electronic Valve control gives the compatible ICON system active adjustment while the aluminum bodies and remote reservoirs support heat management during sustained use.
Key Features
- Vehicle Specific tuning for 2025-2026 Toyota 4Runner
- Pair of rear 2.5-inch aluminum shocks
- Remote reservoirs increase oil volume
- CDEV electronic compression-damping control
- Application range supports zero to three inches of rear lift
- Rebuildable and revalvable performance-shock construction
Fitment
Fits 2025-2026 Toyota 4Runner models supported by ICON with zero to three inches of rear lift. Confirm suspension configuration, rear lift height, CDEV controller compatibility, wheel and tire clearance, and the exact ICON part number before installation.
Specifications
| Brand | ICON |
|---|---|
| Manufacturer Part Number | 57872EP |
| Manufacturer Part Number | 57872EP |
| GTIN | 840103435282 |
| Position | Rear |
| Quantity | Pair |
| Body | 2.5-inch aluminum |
| Reservoir | Remote reservoir |
| Adjustment | CDEV electronic compression damping |
| Lift Range | 0 to 3 inches rear |
| UPC or GTIN | 00840103435282 |
What's Included
Two ICON 57872EP rear 2.5 Aluminum Series remote-reservoir shock absorbers with CDEV assemblies and the installation components supplied by ICON for this exact pair. Front shocks, coil springs, control arms, and a CDEV controller are not included unless expressly shown.
About ICON
ICON manufactures automotive performance and replacement components. Match the exact manufacturer part number and published application details before installation.
Related ICON Products
Frequently Asked Questions
Are both rear shocks included?
Yes. ICON identifies 57872EP as a rear shock pair.
What rear lift range does ICON publish?
ICON specifies this pair for zero to three inches of rear lift.
Does this listing include a CDEV controller?
No. It includes CDEV-equipped shocks. Confirm and purchase the compatible control system separately when required.
Installation Instructions
Installation should be completed by a qualified technician using the current manufacturer instructions. Verify the vehicle or system application, inspect every supplied component, follow the specified fastener and torque procedures, check clearances and routing, and confirm safe operation before driving.
ICON
Shop ICON Vehicle Dynamics suspension systems, coilovers, shock absorbers, control arms, lift springs, steering components, wheels, and service parts by exact manufacturer part number and verified application.Choosing the Correct ICON Part Match the complete ICON manufacturer part number Confirm the canonical year, make, and model plus every application note Verify drivetrain, axle, cab, factory suspension, payload, and special-package requirements Confirm front or rear position, lift range, shock series, damping configuration, and package quantity For wheels, verify diameter, width, bolt pattern, offset, backspacing, center bore, load rating, and brake clearance Related Collections ICON products Coilovers Shocks and struts Control arms Frequently Asked QuestionsHow do I confirm an ICON suspension part fits my vehicle?Match the exact part number, year, make, model, drivetrain, axle, factory suspension package, lift height, position, and every current application note.Does an ICON sh...
View ICON Products
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products