Sold out
Click to zoom in
More controlled wheel travel for demanding street and trail use
ICON Vehicle Dynamics K93142 uses Tremor-geometry steering knuckles, internal-reservoir 2.5-inch coilovers, billet Delta Joint PRO upper control arms, and piggyback rear shocks to increase front travel and lift on qualified F-150 4WD trucks.
Key Features
- ICON Vehicle Dynamics K93142: High-strength ductile-iron steering knuckles replicate F-150 Tremor suspension geometry
- Internal-reservoir 2.5-inch front coilovers provide vehicle-specific damping
- Billet Delta Joint PRO upper control arms provide on-vehicle caster and camber adjustment
- The system provides a manufacturer-stated 20 percent increase in front wheel travel
- Rear 2.5 Aluminum Series piggyback shocks use 7/8-inch hardened chrome shafts
- Bolt-on installation requires no drilling, cutting, or welding
Fitment
Use ICON Vehicle Dynamics K93142 only for the applications below. Confirm every listed qualifier and exclusion.
| Years | Make | Model | Details |
|---|---|---|---|
| 2021-2026 | Ford | F-150 | 4WD only; 3.5-4.5-inch front lift on most stock-equipped models; PowerBoost models have a 3.25-4.25-inch range; Power Stroke diesel models have a 3-4-inch range; ADAS recalibration required after installation; Dynamic bending headlamp models require bracket 611071; Excludes: F-150 Raptor; Factory electronically controlled suspension; Models equipped with OnBoard Scales; Wheel and tire combinations that do not meet the listed clearance requirements |
Specifications
| Detail | Value |
|---|---|
| Brand | ICON Vehicle Dynamics |
| Manufacturer Part Number | K93142 |
| Product Type | Suspension Lift Kit |
| Stage | 2 |
| Front Lift Range | 3.5-4.5 in; 3.25-4.25 in with PowerBoost; 3-4 in with Power Stroke diesel |
| Front Shock Type | 2.5 in internal-reservoir coilovers |
| Rear Shock Type | 2.5 in piggyback shocks for 0-2 in rear lift on most models |
| Upper Control Arms | Billet aluminum with Delta Joint PRO |
| Recommended Wheels | 17x8.5 with 5.00 in backspace and +6 mm offset; 18x9 with 5.25 in backspace and +6 mm offset; or 20x9 with 5.625 in backspace and +16 mm offset |
| Recommended Tire | 34 x 12.50 in; larger tires may require trimming or modifications |
| UPC | 840103425993 |
| Shipping Size | 26 x 19 x 10 in |
| Shipping Weight | 190 lb |
| Installation | Bolt-on; no drilling, cutting, or welding; ADAS recalibration required |
What's Included
- One complete Stage 2 suspension system for ICON Vehicle Dynamics K93142
- Billet upper control arm kit component 98523DJ
- Internal-reservoir coilover kit component 91723
- Front steering knuckle kit component 94000
- Rear shock pair component 97721P
- Not included: Dynamic bending headlamp bracket 611071 when required
- Not included: Wheels, tires, alignment and ADAS calibration services, installation labor, and adjustment tools
About ICON Vehicle Dynamics
ICON Vehicle Dynamics develops rebuildable, vehicle-specific suspension systems using application-tuned damping, serviceable shock construction, and matched control-arm geometry for trucks used on pavement and off road.
Related Parts
- Use only ICON service parts, adjustment tools, wheels, tires, and installation accessories verified for this exact suspension system and truck configuration.
FAQ
What is the K93142?It is an ICON Vehicle Dynamics Stage 2 suspension system with billet aluminum Delta Joint PRO upper control arms, matched front coilovers, and rear shocks for the listed Ford F-150 4WD application.
Which trucks does this suspension system fit?It fits 2021-2026 Ford F-150 4WD trucks subject to every qualifier and exclusion in the Fitment table.
How much front lift does the kit provide?The manufacturer lists 3.5-4.5 inches of front lift on the applicable stock-equipped truck, with any engine-specific range noted in the Fitment table.
What upper control arms are included?The system includes billet aluminum Delta Joint PRO upper control arms selected by ICON for the stated suspension geometry and lift range.
What wheel and tire setup is recommended?ICON recommends the wheel backspacing and offset combinations in the Specifications table with a 34 x 12.50-inch tire; larger tires may require trimming or other modifications.
Does installation require cutting or welding?ICON describes the system as bolt-on with no cutting or welding required, but alignment and any required driver-assistance recalibration must be completed after installation.
Are the shocks serviceable?Yes. ICON identifies the included shocks as fully serviceable and uses vehicle-specific damping for the listed application.
What should be checked before ordering?Confirm 4WD, model year, suspension equipment, wheel clearance, engine-related lift range, and these exclusions: F-150 Raptor; Factory electronically controlled suspension; Models equipped with OnBoard Scales; Wheel and tire combinations that do not meet the listed clearance requirements.
Installation Instructions
- Confirm the truck is a listed 2021-2026 Ford F-150 4WD and does not have any excluded suspension or model configuration.
- Support the truck safely, remove the original front and rear suspension parts, and inspect the mounting points, steering, brake hoses, wiring, and wheel-speed sensor routing.
- Install the ICON steering knuckles, matched coilovers, upper control arms, and rear shocks in the manufacturer's sequence using the supplied hardware.
- Set preload only within the applicable engine-specific lift range and verify reservoir, hose, wheel, tire, and body clearance through full travel.
- Torque hardware to current ICON and Ford specifications, complete a professional alignment, and recalibrate affected advanced driver-assistance systems before road use.
California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Ford F-150 Parts and Accessories
Shop Ford F-150 suspension, engine and truck-accessory references at Black Ops Auto Works. Compare ICON suspension systems, Bilstein or Fox shocks, engine-specific airflow parts and bed or cab accessories around the way you use your truck. Identify generation, engine, drivetrain, cab, bed and any Raptor or Lightning configuration before choosing parts.Suspension Systems or Individual ShocksICON titles distinguish different stages, arm configurations and production ranges. Bilstein front-kit and Fox coilover or rear-shock references cover separate drivetrain and height applications. Define the desired stance and intended use, then match actual suspension and travel requirements with the installer. A component box, rear lift part or shock pair is separate from a complete system with all required arms, brackets and alignment hardware.Engine-Specific Airflow and ServiceInjen and Roush intake references name different engines and production ranges, while aFe Raptor R and GSC Coyote camsh...
View Ford F-150 Parts and Accessories Products
ICON
Shop ICON Vehicle Dynamics suspension systems, coilovers, shocks, control arms and ICON Alloys wheels at Black Ops Auto Works. Compare a complete staged suspension package with individual components for the work you have planned. Choose around your vehicle, factory equipment, accessory load and intended ride height.Staged Suspension Systems and Arm ChoicesICON system listings offer different stages and tubular or billet upper-control-arm configurations within specific vehicle applications. Review the components supplied at each stage rather than using the stage number as a universal specification. F-150, Super Duty, Tacoma and other applications have separate drivetrain, production and equipment requirements.Coilovers, Shocks and Damping ConfigurationsCompare individual coilovers and rear shocks with the lift range, spring specification and damping configuration required by your project. The catalog includes VS reservoir, CDCV and CDEV references, plus extended-travel applications. ...
View ICON Products