Click to zoom in
Built to Keep the Raptor Composed When the Trail Gets Ugly
High speed desert running punishes a rear shock faster than almost anything else on a truck. The ICON 95206L V.S. 3.0 Series Zeta Bypass RXT shock is a driver side rear unit engineered specifically for the 2021-2025 Ford F-150 Raptor, adding a remote reservoir and CDEV flow control so the rear end stays planted instead of fading after repeated hard hits.
Key Features
- 3.0 RXT three tube external bypass rear shock paired with a 3.0 dual hose remote reservoir
- CDEV driven high and low speed flow control adapts damping in real time for comfort and control
- Side mounted upper eyelet increases usable travel while keeping the factory mounting location
- 12.5 inch long, 3.0 inch diameter finned reservoir improves heat dissipation and nitrogen volume
- Application specific length pairs with ICON rear coil springs for up to 17 inches of rear wheel travel
- Fully serviceable design for long term rebuildability
- Compatible with the ICON Intelligent Control app for real time adjustability (iOS device required)
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | Raptor |
Specifications
| Detail | Value |
|---|---|
| MPN | 95206L |
| UPC | 840103435503 |
| Position | Driver Side Rear |
| Shock Series | V.S. 3.0 Zeta Bypass RXT |
| Reservoir Type | 3.0 Remote Reservoir, Dual Hose with CDEV |
| Shipping Weight | 45 lb |
| Shipping Dimensions | 38 in L x 13 in W x 8 in D |
| Sold As | Single shock, sold individually |
What's Included
- 1 ICON 95206L driver side rear V.S. 3.0 Zeta RXT shock with remote reservoir
- Mounting hardware
About ICON
ICON Vehicle Dynamics designs and manufactures suspension systems for trucks and SUVs that need to perform well beyond factory limits. Every component goes through extensive in house research and development, which is why ICON parts are a common choice for builders who push their trucks hard off road without wanting to sacrifice on road manners.
FAQ
What is the 95206L?The 95206L is the ICON Vehicle Dynamics driver side rear V.S. 3.0 Zeta Bypass RXT shock absorber with a remote reservoir, built specifically for the 2021-2025 Ford F-150 Raptor. It uses a three tube bypass design and CDEV flow control to reduce fade during sustained high speed off road driving.
Does the 95206L fit the passenger side too?No. The 95206L is the driver side rear shock only. The passenger side requires part number 95206R, which is sold separately.
Can I run the 95206L with my factory rear coil springs?No. This shock's length is designed around ICON rear coil springs, part number 95230 or 95231. It is not compatible with OE rear coils.
Do I need any other parts to install this shock on a Gen 3 Raptor?Vehicles with single solenoid OE shocks need the ICON solenoid mount kit, part number 95020. Vehicles with dual solenoid OE shocks need a damper interface device, which ICON does not currently offer but is available from third party manufacturers.
How much rear wheel travel does this shock provide?When paired with the complete ICON rear coil spring setup, the 95206L is designed to deliver up to 17 inches of usable rear wheel travel.
What does the CDEV feature do?CDEV stands for the shock's compression damping control valve system, which manages high and low speed flow in real time so the truck stays composed over small chatter and large hits alike.
Is the ICON Intelligent Control app required to use this shock?The app is optional but requires an iOS operated device to access real time adjustability features if you choose to use them.
Is this shock serviceable or does it need to be replaced when worn?The 95206L is fully serviceable, so it can be rebuilt rather than replaced outright as components wear over time.
Install Instructions
- Raise and safely support the rear of the Raptor, then remove the wheel on the driver side.
- Support the rear axle and remove the factory rear shock and any factory reservoir hardware.
- Confirm ICON rear coil springs (95230 or 95231) are installed, since this shock's length requires them.
- Mount the 95206L shock body using the side mounted upper eyelet at the factory mounting location.
- Secure the remote reservoir bracket and route the dual hose lines without kinks or rubbing points.
- Install any required solenoid mount kit or damper interface device based on your truck's OE shock configuration.
- Torque all mounting hardware to ICON's specified values and reinstall the wheel.
- Repeat on the passenger side with part number 95206R, then cycle the suspension and check for clearance before driving.
Prop 65 Warning
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
ICON
Shop all of our ICON suspension kits, ICON Vehicle Dynamics lift kits, Stage 1 suspension systems, Stage 2 suspension systems, Stage 3 suspension systems, Stage 4 suspension systems, Stage 5 suspension systems, Stage 7 suspension systems, Stage 8 suspension systems, Stage 11 suspension systems, coilovers, upper control arms, trailing arms, replacement bushing kits, sleeve kits, lug nuts, ICON Alloys accessories, and off-road suspension components at Black Ops Auto Works. ICON is known for high-quality truck, Jeep, SUV, and off-road suspension systems built for better ride quality, improved handling, trail capability, articulation, and vehicle-specific fitment. Whether you are upgrading a Toyota Tacoma, Toyota Tundra, Toyota 4Runner, Toyota FJ Cruiser, Toyota Land Cruiser 250 Series, Toyota Sequoia, Lexus GX460, Lexus GX550, Ford F-150, Ford Raptor, Ford F-250, Ford F-350, Ford Ranger Raptor, Ram 1500, Ram 2500, Jeep Gladiator, or a custom overland build, our ICON collection includes...
View ICON Products
Shocks and Struts
Shop shocks and struts at Black Ops Auto Works for improved ride control, handling, stability, comfort, towing support, off-road performance, and suspension replacement. This collection includes shock absorbers, monotube shocks, gas shocks, hydraulic shocks, strut assemblies, front struts, rear shocks, coil-over shocks, reservoir shocks, steering dampers, suspension hardware, and vehicle-specific dampers for cars, trucks, SUVs, Jeeps, off-road builds, and performance vehicles. Use this Shocks and Struts collection to find the right suspension upgrade by vehicle, ride height, driving style, and product type. Replacement shocks and struts help restore ride quality, performance shocks improve control and stability, heavy-duty truck shocks support larger vehicles and lifted setups, and off-road shocks help improve durability and control on rough terrain. Shop Shocks and Struts by Brand Black Ops Auto Works carries shocks, struts, and suspension dampers from trusted brands including Bils...
View Shocks and Struts Products
Suspension
Aftermarket suspension systems improve handling, ride quality, and ride height adjustment beyond what the factory suspension provides. From lowering springs and coilover kits for sport handling to lift kits and leveling kits for truck and SUV off-road capability, quality suspension components transform how a vehicle rides and handles. Popular Suspension Upgrades Popular suspension upgrades include coilover kits for adjustable ride height and damping, sport lowering springs for improved handling and reduced body roll, performance shock absorbers and strut assemblies, sway bar and end link upgrade kits, subframe brace kits, and complete suspension packages for lifted trucks and off-road SUVs. Alignment kits including camber bolts and camber arms are also frequently ordered after ride height changes. What is the difference between coilovers and lowering springs? Coilovers are complete shock and spring assemblies with adjustable ride height set by threading the spring perch on the shock...
View Suspension Products