Injen 2018+ Jeep Wrangler JL V6-3.6L Wrinkle Black Power-Flow Air Intake System

Shop cold air intakes, short ram intakes, enclosed air boxes, intake tubes, mass air flow sensors, snorkels, scoops, silicone couplers, replacement filters, and intake service components at Black Ops Auto Works. This collection covers complete vehicle-specific intake systems and supporting components for performance cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and custom fabrication projects. Performance Air Intake Systems and Components An engine air intake system filters incoming air and delivers it to the throttle body, turbocharger, or supercharger inlet. Aftermarket systems may change the intake path, filter location, tubing size, air-box design, induction sound, and airflow characteristics. The results depend on the exact vehicle, engine calibration, intake design, installed modifications, and operating conditions. This collection includes products from Legmaker Intakes, aFe POWER, JLT, K&N, AIRAID, CORSA Performance, Injen, Spectre, Granatelli, Vibrant Per...

Shop cold air intakes, short ram intakes, closed-airbox intake systems, replacement air filters, intake tubes, and MAF housings from K&N, AEM, aFe Power, Airaid, S&B Filters, Injen, Roush, Volant, Corsa, Mishimoto, HPS Performance, Cobb Tuning, JLT, Vararam, Steeda, and other performance intake brands. Find full open-element cold air intakes, sealed-airbox systems, dry and oiled air filters, replacement drop-in filter panels, MAF sensor housings, and complete intake tube kits. Cold air intakes for domestic muscle, sport-compact tuners, diesel trucks, off-road 4x4, Euro performance, and modern sport SUVs Mustang, Camaro, Challenger, Charger, F-150, Silverado, Ram, Tundra, Tacoma, 4Runner, Wrangler, Bronco, Cummins, Duramax, Power Stroke, WRX/STi, Civic Type R, GR86, Supra, GR Corolla, BMW M2/M3/M4, Golf R, and hundreds of additional platforms. Filter by vehicle, intake style (open element, closed airbox, short ram, tube kit), filter media (oiled cotton, dry synthetic), tun...

Shop Injen cold air intakes, short ram intakes, air filters, intercoolers, charge pipes, exhaust systems, Hydroshields and X-Pedal throttle controllers by exact vehicle fitment and manufacturer part number. Use the year-make-model selector, then verify the engine, transmission, body style, emissions notes and finish shown on the product page before ordering. Injen Cold Air Intakes and Short Ram Intake Systems Compare Injen Evolution, Power-Flow, SP, IS, PF and RD Series intake systems for compatible cars, trucks, SUVs and Jeeps. Depending on the application, an Injen intake may use a molded airbox, heat shield or aluminum intake tube with a dry or oiled filter. SP Series systems are Injen’s traditional aluminum performance intakes, while Evolution systems use application-specific molded components and enclosed filtration on many fitments. Construction, filter type, sound, claimed power gains and tuning requirements vary by part number, so the specifications for the exact applicati...

Shop Jeep Gladiator bed protection, hood accessories and exhaust options by exact generation, engine and production. Keep modern JT applications explicit when comparing shared Wrangler products. Bed, Tailgate and Hood Coverage For the listed JT five-foot bed products, compare bed mat, full bed liner and tailgate mat coverage separately. One package should not be assumed to protect every area. Match hood protectors to actual profile and production. Preserve product-specific 4xe or other exclusions in shared Wrangler titles without treating those labels as Gladiator engine coverage. AWE Trail and Tread Exhaust Selection For the listed JT 3.6L systems, compare AWE Trail and Tread configurations by outlet location and supplied rear sections. Tread options include single- or dual-side tips, while Trail uses a different rear arrangement. Match exact engine, production and installation requirements before choosing tip finish. Review conversion pieces and complete system contents separately...

Plan a Jeep Wrangler parts selection by generation, door count, engine and intended use. Compare the actual build requirements before selecting suspension, body or powertrain components. Generation and Build Configuration Identify JK or JL explicitly for a 2018 Wrangler, and record two-door or four-door body and trim. Year alone does not establish which generation’s parts are needed. For modified vehicles, document lift height, wheel dimensions, tire size and axle changes. Use the installed configuration when checking mounting and clearance. Installation and Supporting Components For suspension work, compare required travel, geometry, brake-line routing and supporting parts. Review the complete kit and specified alignment procedure rather than assuming every lift has the same contents. For intake or exhaust inquiries, provide exact engine and body configuration and the proposed manufacturer part number. Compare connection layout, routing and current application before checking avail...

Shop Jeep Wrangler liners, headliners, hood protectors and window accessories using exact generation and body. Match each package’s production range, door count and installation configuration. Floor, Tub and Headliner Coverage Compare floor and tub liners with headliners as separate products. Review whether tailgate coverage or heat shields are supplied, and identify the exact area protected. The listed TJ/LJ packages include console and heat-shield distinctions. JK two-door and JKU four-door applications, as well as early and later JK ranges, should remain separate. Hood and Window Applications Match hood protectors to TJ, JK or JL profile and production. One generation’s hood accessory does not establish fit on another. For window deflectors, compare door count, attachment and supplied pieces. Choose the specific package for the intended body rather than assuming every Wrangler set covers the same windows. Choose Your Part Record generation, year and door count. Identify console,...

Shop Toyota Tundra bed protection and exterior accessories by generation, cab and actual bed length. Confirm liner compatibility and package coverage before selecting finish or flare style. Bed Length and Liner Configuration Five-and-a-half, six-and-a-half and other bed references have different dimensions. Measure the actual bed and check exact manufacturer cab/year coverage. A mat intended for spray-on protection differs from a full liner or bed/tailgate package. Review current liner type and every supplied piece. Hood and Fender Applications Earlier and 2022-on body accessories require separate fit checks. Shared Sequoia wording needs the exact Tundra application confirmed. OE-style, pocket and DRT-style flares have distinct coverage and installation designs. Match body/year, tire clearance, finish and mounting contents. Choose Your Part Identify generation, cab and measured bed length. Match existing liner/spray-on configuration. Choose exact bed/tailgate/full-liner coverage. C...