ISR Performance Rear Traction Rods for 2017+ Infiniti Q60 / 2014+ Q50

Lock In Your Rear Alignment and Kill the Toe Wander That Kills Your Q60 and Q50 Cornering

The ISR Performance IS-RTR-Q60 Rear Traction Rods are precision engineered for the 2017 and newer Infiniti Q60 CV37 and 2014 and newer Infiniti Q50 V37 to provide full adjustment control of your rear suspension geometry. The factory rear traction rods use rubber bushings that deflect under hard acceleration and braking, allowing your rear toe angle to shift unpredictably and undermine both grip and stability. The IS-RTR-Q60 replaces those with rigid adjustable rod ends that lock your rear traction rod length in place so your alignment stays exactly where you set it, lap after lap and canyon run after canyon run. Pair the IS-RTR-Q60 with ISR Performance rear camber arms and toe arms to dial in the full rear suspension geometry of your V37 platform.

Key Features

• ISR Performance IS-RTR-Q60 bolt-on rear traction rods for 2014-2024 Infiniti Q50 V37 and 2017-2024 Infiniti Q60 CV37
• Eliminates factory rubber bushing deflection that causes rear toe change under acceleration and braking loads
• Adjustable design provides precise rear traction rod length tuning for alignment correction
• Rigid rod end construction locks rear alignment at the set position through hard cornering and braking
• Pairs with ISR Performance IS-RCA-Q60 rear camber arms and IS-RTC-Q60 rear toe arms for complete V37 rear geometry control
• Direct bolt-on installation using OEM mounting points on 2014+ Q50 V37 and 2017+ Q60 CV37
• Sold as a pair with rear spacer sets included

Fitment

Specifications

What's Included

• 2x ISR Performance IS-RTR-Q60 rear traction rods
• 2x Rear spacer sets
• All necessary hardware for installation

Frequently Asked Questions

The IS-RTR-Q60 replaces the factory rubber-bushed rear traction rods on the 2014+ Infiniti Q50 V37 and 2017+ Infiniti Q60 CV37. The OEM rubber bushings allow the traction rod to flex under acceleration and braking loads, causing your rear toe angle to shift and creating unstable handling behavior. The IS-RTR-Q60 uses rigid adjustable rod ends that eliminate bushing deflection entirely, keeping your rear alignment locked in at your set toe angle under all driving conditions.

Yes. The IS-RTR-Q60 fits both the 2017 and newer Infiniti Q60 CV37 and the 2014 and newer Infiniti Q50 V37. Both platforms share the same rear suspension architecture, making the IS-RTR-Q60 a direct bolt-on replacement on all V37 platform variants produced through 2024.

If you are installing the IS-RTR-Q60 on a stock-height vehicle, the factory alignment settings can typically be maintained with the traction rods set to OEM length. However, if your Q50 or Q60 is lowered or if you plan to adjust rear toe, you will need adjustable rear toe arms and rear camber arms (such as the ISR IS-RTC-Q60 and IS-RCA-Q60) to properly realign the rear suspension after deleting the factory bushed traction rods.

The IS-RTR-Q60 is designed and sold as a performance suspension component. Check your local regulations regarding aftermarket suspension components on street-driven vehicles. ISR Performance notes that some of their competition-focused components are intended for off-highway use only. Verify compliance with your local laws before installing on a street-driven vehicle.

The IS-RTR-Q60 is a bolt-on replacement that attaches to the OEM rear subframe and knuckle mounting points. A basic lift or jack stands, standard metric hand tools, and penetrating oil for the factory hardware are sufficient for most DIY installers. A professional alignment is strongly recommended after installation to set rear toe to specification. Most experienced installers complete both sides in two to three hours.

The IS-RTR-Q60 is the rear traction rod, which controls fore-aft location of the rear knuckle and prevents toe change under longitudinal load (acceleration and braking). The IS-RTC-Q60 is the rear toe control arm, which directly sets static rear toe angle. Both work together as part of a complete ISR Performance V37 rear suspension alignment system for the Q50 and Q60.

Yes. The IS-RTR-Q60 is compatible with both AWD and RWD configurations of the 2014+ Infiniti Q50 V37 and 2017+ Infiniti Q60 CV37, as the rear traction rod mounting geometry is shared across both drivetrain configurations on the V37 platform.

Yes. Infiniti continued production of the Q50 V37 through 2024 and the Q60 CV37 through 2024 without major rear suspension architecture changes. The IS-RTR-Q60 is compatible with all model years of the V37 platform from the Q50's 2014 introduction through the 2024 model year for both Q50 and Q60.

Yes. Each set includes 2x rear traction rods and 2x rear spacer sets along with all hardware required for installation. No additional adapters or brackets are needed for direct fitment on the 2014+ Infiniti Q50 V37 and 2017+ Infiniti Q60 CV37 at OEM rear subframe mounting points.

Installation Instructions

1. Safely raise and support the Q50 or Q60 on jack stands at all four corners to provide full undercarriage access.
2. Locate the factory rear traction rod on one side. Note the orientation of the factory hardware before removal.
3. Apply penetrating oil to the factory traction rod mounting bolts at the subframe and knuckle ends. Allow to soak for 10 minutes.
4. Support the rear knuckle with a floor jack to prevent suspension droop while removing the traction rod.
5. Remove the factory traction rod mounting bolts and slide out the OEM traction rod and bushing assembly.
6. Install the ISR Performance IS-RTR-Q60 traction rod and spacer set in the factory mounting locations.
7. Hand-tighten the mounting hardware and set the traction rod length to approximate OEM specification before final torquing.
8. Torque all mounting hardware to OEM specification with the suspension at ride height, not at full droop.
9. Repeat on the opposite side.
10. Schedule a professional four-wheel alignment immediately after installation to set rear toe to your target specification.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.