Click to zoom in
Carbon Grill Frame and Plate Bar as a Matched Pair
This is the German Rush grille kit for the 2014-2016 Jaguar F-Type X152, molded in genuine carbon fiber and built as a direct replacement for the factory front grill frame and the license plate bar. Part GRJAGCFGFLPB1416 finishes the whole grille opening in matching carbon instead of one piece at a time, and it installs on the original mounting points on Coupe and Convertible bodies with the V6 and V8. The visible surface is a 2x2 weave under a gloss UV resistant clear coat chosen to match factory carbon trim, so it blends with carbon parts already on the car.
Key Features
- Part GRJAGCFGFLPB1416, genuine carbon fiber grille kit for the 2014-2016 Jaguar F-Type, supplied as 2
- Two piece kit covering the grill frame and the license plate bar
- Both parts are direct replacements that use the factory mounting points
- Vacuum formed rather than hand laid, which produces a consistent weave pattern and a dense, void free laminate
- Factory correct 2x2 weave under a deep gloss UV resistant clear coat that meets or exceeds most OEM finish requirements
- Manufactured in the United States in Lake Elsinore, California
Fitment
| Vehicle Application | Generation or Trim | Body Style | Engine | Position | Notes |
|---|---|---|---|---|---|
| 2014-2016 Jaguar F-Type | X152 | Coupe | V6 and V8 | Front grille | Direct replacement using the original mounting points |
| 2014-2016 Jaguar F-Type | X152 | Convertible | V6 and V8 | Front grille | Direct replacement using the original mounting points |
Specifications
| Detail | Value |
|---|---|
| Manufacturer | German Rush |
| Manufacturer part number | GRJAGCFGFLPB1416 |
| Product type | Grille Kit |
| Material | Genuine carbon fiber |
| Construction method | Vacuum formed, not hand laid |
| Weave | 2x2 |
| Finish | Gloss UV resistant clear coat |
| Piece count | 2 |
| Mounting method | Bolt on at the factory mounting points |
| Position | Front grille |
| Vehicle | 2014-2016 Jaguar F-Type |
| Generation or trim | X152 |
| Body styles covered | Coupe and Convertible |
| Engines covered | V6 and V8 |
| Country of manufacture | United States, Lake Elsinore, California |
What's Included
- Carbon fiber grill frame, part GRJAGCFGF1416, quantity 1
- Carbon fiber grill bar, part GRJAGCFLPB1416, quantity 1
Order reference for this application is GRJAGCFGFLPB1416.
About German Rush
German Rush builds carbon fiber and fiberglass parts for exotic and European performance cars in Lake Elsinore, California. Every carbon panel is vacuum formed rather than hand laid, which is why the weave stays consistent from panel to panel and why the finish is specified as a 2x2 weave with a gloss clear coat similar to the carbon fiber the factory fitted. The range covers the Audi R8, the Lamborghini Aventador and Huracan, and the Jaguar F-Type, so a car can be built up in matching carbon over time.
Related Parts
- Jaguar F-Type Carbon Fiber Front Splitter
- Jaguar F-Type Carbon Fiber Grill Bar
- Jaguar F-Type Carbon Fiber Hood Vents
FAQ
What is the GRJAGCFGFLPB1416?
It is the German Rush grille kit for the 2014-2016 Jaguar F-Type, supplied as 2 and built as a direct replacement for the factory front grill frame and the license plate bar.
What are the two pieces?
The carbon grill frame that surrounds the grille opening and the carbon grill bar that carries the front plate.
Can the frame be bought alone?
The frame is supplied in this kit alongside the bar, which is how German Rush lists it.
Is drilling required?
No. Both pieces use the original mounting points.
Is this real carbon fiber or a carbon look finish?
It is genuine carbon fiber. The visible surface is a 2x2 weave finished in a gloss UV resistant clear coat chosen to sit alongside the carbon trim the factory fitted.
What is the advantage of vacuum forming over hand laid parts?
Vacuum forming compacts the laminate under pressure, which removes voids and keeps the weave straight across the panel. The result is a denser part with more repeatable thickness and a more consistent surface than a hand laid panel.
Does installation require cutting or drilling?
The part is built around the factory mounting locations, so the original panel comes off and this one goes on in its place. Professional installation is recommended, and minor prep or adjustment can be part of a normal fit.
Can it be painted or wrapped instead?
Yes. Pre fit the part to the car and confirm alignment before any paint, vinyl, or extra clear coat is applied, because a finished surface is much harder to correct afterwards.
Where is it made?
It is manufactured in the United States, in Lake Elsinore, California, where German Rush molds its carbon and fiberglass parts.
How should the shipment be checked on arrival?
Inspect the carton and the part before signing for the delivery. Note any crushed, torn, punctured, or broken condition on the freight bill in the driver's presence, because concealed damage found later is much harder to claim.
Installation Instructions
- Unpack the part, inspect it for transit damage, and confirm that part GRJAGCFGFLPB1416 matches the 2014-2016 Jaguar F-Type application before any work starts.
- Park on a level surface and make the work area accessible, raising and supporting the car on stands or a lift when the part sits low on the body.
- Wash and dry the surrounding panels so grit does not scratch either part during the swap.
- Release the factory fasteners and clips that hold the factory front grill frame and the license plate bar and remove the original part, keeping all hardware.
- Transfer any reusable clips or fasteners and clean the mating surfaces.
- Dry fit the new part and check gaps and alignment across the full width on both sides.
- Carry out any minor prep or trimming needed for an ideal fit while the part is still off the car.
- If the part is going to be painted or wrapped, complete the dry fit first, then finish it, then return to installation.
- Refit the part and tighten the fasteners evenly from the center outward so the panel is not pulled out of shape.
- Recheck alignment and panel gaps, then lower the car.
- Retorque or reseat any fastener that shifted after the first drive.
Carbon Fiber Parts & Accessories
Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...
View Carbon Fiber Parts & Accessories Products
Exterior Parts & Accessories
Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...
View Exterior Parts & Accessories Products
German Rush
German Rush carbon fiber and fiberglass exterior parts give European sports car and supercar builds a focused aerodynamic finish. Shop front splitters, rear diffusers, side skirts, wings, door trim, vents, grille accents, side blades, bumper pieces and exterior carbon fiber parts for Audi R8, Jaguar F Type and Lamborghini Huracan applications. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 49 German Rush SKUs across aero, carbon fiber styling, body accents, spoilers and vehicle specific exterior upgrades. What This German Rush Collection Covers German Rush parts in this collection focus on platform specific exterior styling for premium European performance vehicles. The range includes visual upgrades that follow the contours and mounting points of the intended vehicle, so application confirmation is essential before a panel or aero component is ordered. Front Aero and Splitters ...
View German Rush Products
License Frame
License Frame parts and accessories License frame parts and accessories help finish the rear or front exterior of cars, trucks, Jeeps and performance builds. Shop carbon fiber frames, aluminum frames, stainless frames, chrome frames, slim designs, plate backings, frame hardware, relocation pieces and branded plate surrounds. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 33 License Frame SKUs across fitment specific and universal applications. What This License Frame Collection Covers This collection includes universal plate frames plus vehicle focused frame and backing options for applications such as Subaru WRX, BRZ, Ford Mustang, Dodge Charger and Nissan GT R. Select a frame that keeps registration markings visible and suits the mounting area on the vehicle. Frame Materials and Finishes Carbon fiber, aluminum, stainless and chrome frames bring different looks and durability. ...
View License Frame Products
License Plates & Frames
License plate frames, relocators and front plate brackets give performance cars, trucks, SUVs and off-road builds a cleaner and more secure plate solution. Shop billet and carbon fiber frames, tow-hook mounts, relocation kits, delete plates, fairlead mounts and vehicle-specific front brackets for Mustang, Camaro, WRX, GT-R, Charger, Civic Type R, Tacoma and Jeep. Every product is filterable by year, make, model, trim, bumper setup and drivetrain so the correct exterior accessory ships the first time. Black Ops Auto Works carries 133 license plate and frame SKUs for street, show, off-road and enthusiast builds. What This License Plates & Frames Collection Covers This broad collection covers frames, relocators, front mounts and plate accessories across many vehicle platforms. Match the exact bumper, tow-hook location, grille layout and local front-plate requirements before making a selection. License Plate Frames and Exterior Styling Billet, Carbon Fiber and Branded Options A ...
View License Plates & Frames Products