-18%
Click to zoom in
This JBA exhaust adapter is designed to connect the specified JBA exhaust components with the correct diameter and interface. Confirm the exact application, configuration, and manufacturer part number before ordering.
Key Features
- JBA Performance Exhaust 1650ST 2.5" Stainless Steel 1650 Starter Tubes.
Fitment
| Fitment Status | Universal fabrication component |
|---|---|
| Required Verification | Diameter, flange or inlet and outlet orientation, routing, space, and fabrication requirements |
Specifications
| Brand | JBA |
|---|---|
| Manufacturer Part Number | 1650ST |
| Product Type | Exhaust Adapter |
| Fitment Type | Universal |
| Material | Stainless steel |
| Finish | Manufacturer finish |
| Nominal Diameter | 2.5 in |
| Emissions | N/A |
| Condition | New |
| GTIN | 694342525538 |
What's Included
One new JBA exhaust adapter identified by manufacturer part number 1650ST in the exact finish and configuration stated by the product title. Gaskets, clamps, hardware, adapters, sensors, and companion exhaust components are included only when expressly listed by JBA for this part number.
About JBA
JBA Performance Exhaust develops stainless-steel headers, exhaust systems, connection pipes, gaskets, and related components for street, truck, and performance applications.
Related JBA Products
- Shop all JBA products
- JBA 2.5in Stainless 1650 EFI Starter Tubes
- JBA 11-14 Ford F-150 All 2.7L/3.5L/5.0L 409SS Pass Side Single Exit Cat-Back Exhaust
- JBA 15-20 Chrysler 6.2/6.4L HEMI 1 7/8in Primary Silver Ctd Cat4Ward Header
Frequently Asked Questions
What must I measure before using this manufacturer finish stainless steel 2.5 in JBA exhaust adapter in a custom system?
Confirm tube diameter, flange or inlet and outlet orientation, available space, routing, and the fabrication hardware required for the complete system.
Does installation require cutting or welding?
That depends on the exact vehicle and companion exhaust components. Review the current JBA instructions and test-fit the complete system before modifying any pipe.
What should be checked before the first drive?
Verify fastener torque, exhaust clearance, hanger alignment, leak-free joints, and adequate distance from wiring, fuel lines, brake lines, and bodywork.
Installation Instructions
Follow the current JBA instructions for part number 1650ST and the factory service procedure. Work on a cool vehicle, support it safely, disconnect the battery where required, test-fit every component, protect wiring and fluid lines from heat, torque fasteners to specification, check for leaks, and inspect the installation after the first heat cycles.
JBA
Shop JBA headers, exhaust systems, connection pipes, gaskets, ignition wire sets, and installation components by exact manufacturer part number and verified vehicle application. JBA Product Families The collection includes stainless-steel shorty and long-tube headers, cat-back and header-back systems, mid-pipes, starter tubes, exhaust gaskets, mufflers, brackets, and application-specific spark plug wire sets. Choosing the Correct JBA Product Match the exact JBA manufacturer part number Confirm year, make, model, engine, drivetrain, and body configuration Verify primary and collector diameter, material, finish, and downstream connection Check oxygen-sensor, EGR, AIR, and catalytic-converter provisions Confirm current CARB or EPA status for the installation location Related Exhaust Collections Exhaust Parts Headers Exhaust Systems Exhaust Accessories Frequently Asked Questions Does matching the vehicle model guarantee JBA exhaust fitment?No. Confirm the complete year, engine, dri...
View JBA Products