-7%
Click to zoom in
The JE Pistons wrist pin identified by manufacturer part number 927-2250-20-93C is designed to connect a compatible piston and connecting rod using the specified diameter, length, wall, and material. Final compatibility depends on the complete engine combination and measured dimensions, not the part title alone.
Key Features
- Piston Wrist Pin, 9310 Nickel Carbon Steel Alloy, 0.927 in.
Fitment
| Fitment Status | Universal only by exact component dimensions |
|---|---|
| Required Verification | Bore or pin diameter, ring or wall thickness, length, material, groove design, cylinder count, and intended engine use |
Specifications
| Brand | JE Pistons |
|---|---|
| Manufacturer Part Number | 927-2250-20-93C |
| Product Type | Wrist Pin |
| Fitment Type | Universal |
| Condition | New |
| GTIN | 00193564007100 |
| Wrist Pin Outer Diameter | 0.927 IN |
| Wrist Pin Length | 2.250 IN |
| Wrist Pin Wall Thickness | 0.200 IN |
| Wrist Pin Material | 9310 Nickel Carbon Steel Alloy |
What's Included
One new JE Pistons wrist pin identified by manufacturer part number 927-2250-20-93C in the quantity and configuration stated by the official specifications. Rings, pins, locks, coatings, and installation components are included only when expressly listed for this exact part number.
About JE Pistons
JE Pistons engineers forged racing pistons, piston rings, wrist pins, locks, and related engine components for measured domestic, import, European, and professional motorsport builds.
Related JE Pistons Products
- Shop all JE Pistons products
- JE Pistons .866in O/S Dia x 2.250in Length Chamfered Straight Wall Pin
- JE Pistons .787 x 2.250 x .180 Straight Wall Pin
- JE Pistons Straight Wall Pin - .866 x 2.250 x .180
Frequently Asked Questions
How do I confirm JE Pistons 927-2250-20-93C matches my engine parts?
Match every listed dimension and material to the piston, connecting rod, cylinder bore, and intended engine use. A similar bore or diameter alone does not confirm compatibility.
What dimensions must match for this wrist pin?
Confirm outer diameter, length, wall thickness, material, piston pin-bore size, connecting-rod small-end design, retainer type, and the required press-fit or floating-pin clearance.
Can a used wrist pin be installed with new pistons?
Use the pin specified for the piston and power level. A qualified engine builder should inspect dimensions, straightness, finish, wear, and clearance before any component is reused.
Installation Instructions
Use the current JE Pistons instructions for part number 927-2250-20-93C and the engine builder's measured assembly specifications. A qualified machine shop must verify bore finish, clearances, ring gaps, pin fit, lock installation, orientation, balance, deck height, valve clearance, compression ratio, lubrication, and break-in before operation.
JE Pistons
Shop JE Pistons forged piston kits, ring sets, wrist pins, and retainers by exact manufacturer part number, official dimensions, and verified engine application. JE Pistons Product Families The collection includes forged piston kits for domestic, import, and European performance engines plus JE Pro Seal ring sets, wrist pins, and pin retainers for measured engine assembly. Choosing the Correct JE Pistons Component Match the exact JE Pistons manufacturer part number Confirm engine code, bore, stroke, rod length, and cylinder head Calculate compression with measured chamber, gasket, deck, and piston volume Verify pin diameter, pin length, wall thickness, and rod small-end design Match ring bore and every groove thickness to the piston Use machine-shop measurements for final clearances and ring gaps Related Engine Collections Pistons Piston Rings Connecting Rods Engine Block Components Frequently Asked Questions Does matching the engine family guarantee a JE piston kit will fit?No...
View JE Pistons Products