The JE Pistons forged piston kit identified by manufacturer part number 186237 is designed to provide the piston geometry, material, and compression configuration for a specific performance-engine build. Final compatibility depends on the complete engine combination and measured dimensions, not the part title alone.
Key Features
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 1992-1994 | Volkswagen | Corrado | Verify engine code and all build dimensions |
| 1993-1997 | Volkswagen | Passat | Verify engine code and all build dimensions |
| 1995-1998 | Volkswagen | Golf | Verify engine code and all build dimensions |
| 1995-1999 | Volkswagen | Jetta | Verify engine code and all build dimensions |
Specifications
| Brand | JE Pistons |
|---|---|
| Manufacturer Part Number | 186237 |
| Product Type | Forged Piston Kit |
| Fitment Type | Vehicle Specific |
| Condition | New |
| GTIN | 00193564216540 |
| Piston Series | JE Pistons |
| Cylinder Head | VR6 |
| Bore Diameter | 82.00 MM |
| Piston Head Type | Dome |
| Compression Height | 1.275 IN |
| Piston Volume | -5.00 CC |
| Piston Material | 2618 |
| Piston Quantity | 6 |
| Forging Type | Round |
| Compression Ratio | 10.0:1 |
| Ring Set Included | Yes |
| Top Compression Ring Thickness | 0.0400 IN |
| Second Compression Ring Thickness | 0.0480 IN |
| Oil Ring Thickness | 0.111 IN |
| Wrist Pin Outer Diameter | 0.787 IN |
| Wrist Pin Length | 2.250 IN |
| Wrist Pin Wall Thickness | 0.180 IN |
What's Included
One new JE Pistons forged piston kit identified by manufacturer part number 186237 in the quantity and configuration stated by the official specifications. Rings, pins, locks, coatings, and installation components are included only when expressly listed for this exact part number.
About JE Pistons
JE Pistons engineers forged racing pistons, piston rings, wrist pins, locks, and related engine components for measured domestic, import, European, and professional motorsport builds.
Related JE Pistons Products
Frequently Asked Questions
Will JE Pistons 186237 fit my 1992-1994 Volkswagen Corrado?
That year, make, and model range is listed. Confirm the exact engine code, bore, stroke, rod length, pin size, cylinder head, compression target, and machine-shop measurements before ordering.
Are piston rings included with this 82.00 MM JE piston kit?
The official JE specification lists Ring Set Included as Yes. Confirm pins, locks, quantity, and any upgraded pin option in the What's Included section before assembly.
What must the machine shop measure before final assembly?
Verify finished bore diameter, piston-to-wall clearance, ring end gaps, deck height, piston-to-valve clearance, pin fit, bearing clearances, and final compression ratio for the intended fuel, boost, and power level.
Installation Instructions
Use the current JE Pistons instructions for part number 186237 and the engine builder's measured assembly specifications. A qualified machine shop must verify bore finish, clearances, ring gaps, pin fit, lock installation, orientation, balance, deck height, valve clearance, compression ratio, lubrication, and break-in before operation.
Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...
View Engine Products
Shop JE Pistons forged piston kits, ring sets, wrist pins, and retainers by exact manufacturer part number, official dimensions, and verified engine application. JE Pistons Product Families The collection includes forged piston kits for domestic, import, and European performance engines plus JE Pro Seal ring sets, wrist pins, and pin retainers for measured engine assembly. Choose Your Part Match the exact JE Pistons manufacturer part number Confirm engine code, bore, stroke, rod length, and cylinder head Calculate compression with measured chamber, gasket, deck, and piston volume Verify pin diameter, pin length, wall thickness, and rod small-end design Match ring bore and every groove thickness to the piston Use machine-shop measurements for final clearances and ring gaps Related Engine Collections Pistons Piston Rings Connecting Rods Engine Block Components Frequently Asked Questions Does matching the engine family guarantee a JE piston kit will fit? No. Confirm the exact engi...
View JE Pistons Products
Find Volkswagen Corrado brake, suspension and injector applications using exact production and installed engine. Confirm full component specifications before selecting shared Audi/VW references. Fuel-System and Engine Requirements A VR6 12-valve injector set needs matching engine, rail, feed dimensions, connectors and tuner calibration. Flow or set quantity alone does not establish installation support. Document engine swaps and current fuel-system equipment. Choose the exact supported injector/adaptor arrangement rather than assuming every Corrado uses the same configuration. Brake and Suspension Service Match caliper, rotor dimensions and axle for every pad/rotor kit component. Another Audi/VW heading needs exact Corrado manufacturer coverage. Rear mounts and front boots have separate position, dimension and contents requirements. Review actual bearing/hardware pieces and any modified suspension. Choose Your Part Identify production, actual engine and fuel system. Confirm injecto...
View Volkswagen Corrado Parts and Accessories Products
Shop Volkswagen Golf exhaust, intake and cabin-service applications by exact generation, engine and body. Keep 1.8T, 2.0T, 2.5-litre and diesel requirements separate. Engine-Specific Exhaust and Intake A 2.5-litre Golf/Rabbit exhaust and a Mk7 1.8T system are different applications. Match the engine, body and current connection points before comparing sound or finish. Intakes need exact sensor, turbo or naturally aspirated routing support. An ALH TDI reference should not be extended to gasoline engines. Damper and Cabin Interfaces Dampers require matching crank attachment, pulley and accessory drive. Confirm exact engine generation and manufacturer part number. Front liners need correct cabin contours, retention points and body/year coverage. Shared Beetle/Jetta naming does not establish every Golf interior fit. Choose Your Part Identify generation, engine and body configuration. Match exhaust and intake engine-specific interfaces. Confirm crank/pulley and complete damper applicati...
View Volkswagen Golf Parts and Accessories Products
Shop Volkswagen Jetta exhaust and cabin accessories by generation, body and engine. Keep GLI, 1.4T, 1.8T and 2.5-litre applications separate when comparing systems. Engine and GLI Exhaust Choices A Mk6 1.4T exhaust, a GLI 2.0T system and a 2.5-litre application have different requirements. Use the full manufacturer part number to confirm year, engine and body coverage. Compare Touring and Track sound configuration after establishing fit. For systems specifying an original downpipe, confirm the current exhaust connection before purchase. Conversion Kits and Cabin Coverage Touring-to-Track or Track-to-Touring sections require the matching starting exhaust. Check retained parts and conversion direction rather than treating the kit as a complete system. Floor liners need exact sedan or wagon coverage, cabin contours and retention points. A front-row set does not establish rear-row protection or fit in a different body. Choose Your Part Identify generation, sedan/wagon body and actual e...
View Volkswagen Jetta Parts and Accessories Products
Shop Volkswagen Passat engine-accessory, intake and cabin applications by production, engine and sedan or wagon body. Confirm the current powertrain and suspension equipment before selecting shared Volkswagen parts. Engine, Intake and Damper Interfaces A 2.5-litre intake and a Gen3 turbo inlet require different engine and air-path applications. Match sensors, hoses, turbo connection and mounting points. FSI six-bolt and TSI damper references require the correct engine/crank interface, accessory-drive alignment and installation hardware. Use the actual engine code when checking coverage. Mounts, Helper Springs and Liners A drivetrain stabilizer’s rubber or polyurethane configuration affects its intended setup. Confirm the exact mount location, application and supplied components. Helper springs need exact body and suspension coverage; wagon-specific support should not be extended to every sedan. Floor liners need matching cabin contours, retention points and row coverage. Choose Your...
View Volkswagen Passat Parts and Accessories Products
