Click to zoom in
Black Ops Auto Works is proud to offer the **K&N 57 Series Fuel Injection Performance Kit (FIPK)** for 1994–1995 Ford Mustang 5.0L V8 models. Unlike a simple drop-in filter, this complete intake system replaces the factory air box and intake tubing with a high-flow conical air filter, heat shield, and precision rotomolded intake tube. The result is improved throttle response, increased horsepower, and a more aggressive engine sound. This kit is CARB legal (EO D-269-8) and is street legal in all 50 states.
Key Features
- Estimated +13 HP Gain – Delivers noticeable power and throttle response improvements.
- High-Flow Conical Air Filter – Larger than stock for increased airflow and longer service life.
- K&N High-Flow Conical Air Filter.
- Mass Air Flow Sensor Adapter (when required).
- A: K&N estimates approximately +13 horsepower and +14 lb-ft of torque on the 5.0L V8.
- Complete Intake Replacement – Replaces the entire factory air intake system for maximum airflow.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 1994-1995 | Ford | Mustang | GT, GTS, SVT Cobra |
Specifications
| Brand | K&N Engineering |
|---|---|
| Manufacturer Part Number | 57-2511 |
| Product Type | Cold Air Intakes |
| Fitment Type | Vehicle Specific |
| Condition | New |
What's Included
One new K&N cold air intakes identified by manufacturer part number 57-2511. Hardware, adapters, clamps, hoses, filters, and service supplies are included only when stated for this exact product.
About K&N Engineering
K&N develops reusable air filtration, intake, oil filtration, fuel filtration, and related performance products for vehicle-specific and dimensional applications.
Related K&N Engineering Products
- Shop all K&N Engineering products
- K&N 11-12 Ford Mustang GT 5.0L V8 Aircharger Performance Intake Kit
- K&N 11-14 Ford Mustang GT 5.0L V8 Black Performance Intake Kit
- K&N 18-19 Ford Mustang GT V8-5.0L 57 Series FIPK Performance Intake Kit
Frequently Asked Questions
How do I confirm K&N 57-2511 fits my vehicle?
Match the year, make, and model in the fitment table, then confirm the engine, factory housing, sensor layout, emissions notes, and any application restrictions stated for this exact part.
Does K&N 57-2511 require tuning or emissions verification?
Requirements vary by vehicle and intake configuration. Check the current K&N application and emissions notes, and complete any required calibration before full-load operation.
What should be checked after installing K&N 57-2511?
Verify seals, clamps, fasteners, hoses, sensors, wiring, and surrounding clearance as applicable. Check for leaks or contact, then follow the manufacturer service and reinspection schedule.
Installation Instructions
- Use the current K&N instructions for part number 57-2511 and follow all vehicle, product, and service precautions.
Air Intake Systems
Shop performance air intake systems for your next engine-bay upgrade at Black Ops Auto Works. Compare complete cold-air intakes, short-ram layouts and enclosed systems from Legmaker, JLT, aFe, K&N, Injen and other listed manufacturers. Choose the intake character, packaging and filter-service approach that suit the vehicle and the way you use it.Complete Intakes or a Focused Component UpgradeA complete intake is the place to start when changing the filter, tubing and enclosure as a matched package. An individual airbox, intake tube, coupler or replacement filter can be a better purchase when the rest of the installed system is staying. Compare what the package supplies before choosing between the two routes.For a naturally aspirated, turbocharged or supercharged engine, the connection and sensor arrangement are part of the design. Choose the complete system for that application rather than combining a large tube and filter solely by appearance.Cold-Air, Short-Ram and Enclosed De...
View Air Intake Systems Products
Cold Air Intakes
Shop cold air intakes, short-ram systems, closed-airbox packages and intake tubes at Black Ops Auto Works. Compare Legmaker carbon-fiber layouts with aFe, K&N, Injen, AEM, JLT, CORSA, Volant and other listed options. Choose the filter location, inlet connection, service requirements and induction character that suit the vehicle and build.Choose the Intake LayoutA closed-airbox system encloses the filter and uses its specified air-feed arrangement. An open-element or short-ram layout places the filter differently and can change the audible induction character. A longer routed intake, a short-ram system and a factory-airbox tube replacement involve different installation scopes.Compare the actual filter position, heat-shield/enclosure design, retained ducts and access for maintenance. A cold-air label alone does not establish a lower inlet temperature in every driving condition or a fixed horsepower gain. Review manufacturer testing for the exact system and application.Legmaker HE...
View Cold Air Intakes Products
Ford Mustang Parts & Accessories
Shop Ford Mustang parts for exhaust projects, body changes, brake service and chassis work at Black Ops Auto Works. Compare CORSA exhaust references, Anderson Composites panels, Baer or DBA brake options and suspension components. Build your order around the exact Mustang generation, engine, body, transmission and installed equipment.CORSA Exhaust and Engine-Specific ProjectsCORSA references include 2020–2022 Shelby GT500 active cat-back systems with different tip configurations. Match factory valve equipment, body and complete system coverage before comparing finishes. BBK headers, intake and MAF references span other engines and production ranges. Ford modular intake, Boundary oil-pump and Mishimoto EcoBoost intercooler references require their own exact engine and installation checks.Carbon Fiber, Fiberglass and Exterior DetailsAnderson Composites fenders, hoods and bumper inserts distinguish production ranges, materials and body applications. APR plate backing, S550 quarter louv...
View Ford Mustang Parts & Accessories Products
K&N Engineering
Shop K&N Engineering intake and filtration products at Black Ops Auto Works. Compare vehicle-specific AirCharger and NextGen systems with replacement engine-air, cabin and oil filters. For a custom intake project, review clamp-on filters, adapters and filter-wrap choices by their exact dimensions and requirements.Vehicle-Specific Intake SystemsCompare K&N AirCharger and NextGen intake systems for the exact Jeep, Dodge, Ram, Ford, GM or other vehicle you are building. Match engine, production and factory induction equipment, then review the tubing, filter, sensor provisions and ventilation connections supplied. Check the selected kit’s complete installation and calibration requirements before ordering.Replacement Engine-Air, Cabin and Oil FiltersChoose an engine-air filter for the existing airbox or intake, a cabin filter for the ventilation system, or an oil filter for the exact engine. Compare the specific High-Flow, Advantage, Advantage Plus or other product’s application ...
View K&N Engineering Products