Click to zoom in
Black Ops Auto Works is proud to offer the **K&N Universal Chrome Top Clamp-On Air Filter** as a high-quality solution for custom intake systems, carbureted applications, and performance builds.
Key Features
- A: This filter has a 2.063-inch inside diameter flange and is designed to clamp onto intake tubes approximately 2 inches in diameter.
- Oiled Cotton Gauze Media β Excellent balance of flow and filtration.
- High Airflow Performance β Supports increased horsepower and throttle response.
- Universal Fitment β Works with many custom intake and carbureted applications.
- Chrome Metal Top β Attractive finish with good durability.
- Flexible Rubber Flange β Absorbs vibration and allows slight stretching for fitment.
Fitment
| Fitment Status | Universal or dimensional product |
|---|---|
| Required Verification | Exact dimensions, media, connection, mounting interface, and companion part number |
Specifications
| Brand | K&N Engineering |
|---|---|
| Manufacturer Part Number | RC-1200 |
| Product Type | Air Filters - Universal Fit |
| Fitment Type | Universal |
| Condition | New |
What's Included
One new K&N air filters - universal fit identified by manufacturer part number RC-1200. Hardware, adapters, clamps, hoses, filters, and service supplies are included only when stated for this exact product.
About K&N Engineering
K&N develops reusable air filtration, intake, oil filtration, fuel filtration, and related performance products for vehicle-specific and dimensional applications.
Related K&N Engineering Products
- Shop all K&N Engineering products
- K&N Filter Universal X Stream Clamp-On 2.438in Flange ID x 4.5in Base OD x 4in Top OD x 6.563in H
- K&N Marine 3.75in Flange ID x 3.75in Top OD/4.5in Base OD x 4in H Round Tapered Flame Arrestor
- K&N Universal Rubber Filter Round Tapered 4.5in Flange ID x 5.875 Base OD x 5in Top OD x 3.25in H
Frequently Asked Questions
How do I confirm K&N RC-1200 fits my setup?
Match every listed dimension, flange or thread size, media type, mounting interface, and companion component. A similar shape or outside dimension alone does not confirm compatibility.
Is K&N RC-1200 washable and reusable?
Serviceability depends on the exact media used for this part number. Follow the K&N cleaning and oiling directions for this filter and never apply oil to media specified as dry.
What should be checked after installing K&N RC-1200?
Verify seals, clamps, fasteners, hoses, sensors, wiring, and surrounding clearance as applicable. Check for leaks or contact, then follow the manufacturer service and reinspection schedule.
Installation Instructions
- Use the current K&N instructions for part number RC-1200 and follow all vehicle, product, and service precautions.
Air Filters
Performance Air Filters and Replacement Filters Shop performance engine filters, factory-airbox replacements, universal intake filters and cabin filters at Black Ops Auto Works. Choose a drop-in element for routine service, a measured clamp-on filter for a custom intake, or a replacement for the aftermarket system already installed. Compare filter media and care requirements alongside the application so the next service is part of the buying decision. Choose the Correct Air Filter Type Direct-fit and drop-in filters: shaped for a specific factory air box or listed intake system. Universal clamp-on filters: selected by flange inside diameter, base and top dimensions, height and available clearance. Cabin and HVAC filters: vehicle-specific filters for air entering the passenger compartment. Breather filters: compact filters for compatible valve-cover, crankcase-vent and catch-can applications. Pre-filters and wraps: outer covers designed for compatible primary filters in dust...
View Air Filters Products
Air Filters - Universal Fit
Shop universal air filters for a custom intake, turbo-inlet layout, carbureted air cleaner or compatible crankcase-vent project at Black Ops Auto Works. Compare compact cone filters, large-flange designs, low-profile shapes and complete air-cleaner assemblies to solve the space and connection requirements of your build. Universal Air Filters for Custom Intake Builds A universal filter is selected by dimensions and interface. The flange inside diameter must match the intake tube, turbo inlet, velocity stack, carburetor neck, or breather connection. The filter body must also clear nearby panels, wiring, hoses, heat shields, suspension components, and the hood while leaving enough exposed media for the application. Measure the installation area before ordering. Record the flange size, base width, top width, overall height, filter shape, mounting angle, and straight length available for the clamp. Product titles can look similar even when one dimension makes the filter incompatible. Sh...
View Air Filters - Universal Fit Products
K&N Engineering
Shop K&N Engineering intake and filtration products at Black Ops Auto Works. Compare vehicle-specific AirCharger and NextGen systems with replacement engine-air, cabin and oil filters. For a custom intake project, review clamp-on filters, adapters and filter-wrap choices by their exact dimensions and requirements.Vehicle-Specific Intake SystemsCompare K&N AirCharger and NextGen intake systems for the exact Jeep, Dodge, Ram, Ford, GM or other vehicle you are building. Match engine, production and factory induction equipment, then review the tubing, filter, sensor provisions and ventilation connections supplied. Check the selected kitβs complete installation and calibration requirements before ordering.Replacement Engine-Air, Cabin and Oil FiltersChoose an engine-air filter for the existing airbox or intake, a cabin filter for the ventilation system, or an oil filter for the exact engine. Compare the specific High-Flow, Advantage, Advantage Plus or other productβs application ...
View K&N Engineering Products