-6%
Click to zoom in
King Shocks 25001-326 is a rear pair of 2.5-inch OEM Performance Series piggyback-reservoir shocks for supported 2014-2026 Ram 3500 four-wheel-drive trucks. King factory tunes the rebuildable dampers for the application and uses finned reservoirs to increase fluid capacity and heat dissipation.
Key Features
- Pair of rear 2.5-inch shocks
- Piggyback finned reservoirs
- Factory-tuned application-specific damping
- Fully rebuildable, serviceable, and tunable construction
- Bolt-on installation for supported factory mounts
- Race-derived materials and manufacturing tolerances
Fitment
Fits supported 2014-2026 Ram 3500 four-wheel-drive applications. Four-wheel drive, suspension configuration, and lift requirements remain application qualifiers rather than model tags. Confirm rear suspension, ride height, shock travel, reservoir clearance, and every current King application note.
Specifications
| Brand | King Shocks |
|---|---|
| Manufacturer Part Number | 25001-326 |
| Manufacturer Part Number | 25001-326 |
| Position | Rear |
| Quantity | Pair |
| Shock Body Diameter | 2.5 inches |
| Reservoir | Piggyback finned reservoir |
| Compressed Length | 17.728 inches |
| Extended Length | 27.736 inches |
| Stroke | 10.008 inches |
| Gas Pressure | 150 PSI |
| Drivetrain Application | Four-wheel drive |
What's Included
Two King 2.5-inch rear piggyback-reservoir shocks with the bushings, washers, nuts, and application-specific hardware supplied for part 25001-326. Compression adjusters are not included with this non-A version.
About King Shocks
King Shocks manufactures automotive performance and replacement components. Match the exact manufacturer part number and published application details before installation.
Related King Shocks Products
Frequently Asked Questions
Are two rear shocks included?
Yes. King 25001-326 is sold as a rear pair.
Does this version include compression adjusters?
No. This is the standard non-A version. Order the exact adjuster-equipped part number when that feature is required.
Will these fit a Ram 2500?
Part 25001-326 is published for Ram 3500 applications. Ram 2500 uses a different rear shock part number.
Installation Instructions
Installation should be completed by a qualified technician using the current manufacturer instructions. Verify the vehicle or system application, inspect every supplied component, follow the specified fastener and torque procedures, check clearances and routing, and confirm safe operation before driving.
King Shocks
Shop King Shocks coilovers, remote-reservoir shocks, bypass dampers, bump stops, steering stabilizers, coil springs, and service components by exact manufacturer part number and verified suspension application.Choosing the Correct King Shocks Product Match the exact King manufacturer part number Confirm canonical year, make, and model plus every current application note Verify drivetrain, axle, factory suspension, payload, special package, and mounting position Confirm stock, leveled, or lifted ride height and the supported lift range Check shock diameter, travel, extended length, compressed length, mounting interface, reservoirs, adjusters, springs, and package quantity Related Collections King Shocks products Shocks and struts Suspension parts Coilovers Frequently Asked QuestionsHow do I verify a King Shocks kit fits my vehicle?Match the exact year, make, and model, then confirm drivetrain, suspension package, lift height, mounting position, travel, and manufacturer part number.Ar...
View King Shocks Products
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products