Six Spokes. Graphite Attitude. Street-Ready Cast — Konig Tandem TM88514356 in 18x8 5x114.3 ET35
The Konig Tandem TM88514356 brings a clean 6-spoke cast aluminum design to the 5x114.3 fitment family in 18x8 with an ET35 offset and gloss graphite finish. The TM88514356 is a single-piece cast construction built to handle daily street miles while keeping your build looking sharp. The graphite finish complements both dark and bright body paint, and the restrained spoke design works on everything from sport sedans to hot hatches. Each TM88514356 ships individually with a center cap included and is rated to 1,521 lbs load capacity.
The 73.1mm center bore on the TM88514356 covers the widest range of 5x114.3 platforms without requiring custom boring. The ET35 offset is a practical street fitment that tucks cleanly under most factory fenders while still showing a clean flush stance. TPMS sensors are compatible, and hub-centric rings can be used for vehicles with a tighter factory hub bore.
Fitment
The TM88514356 fits vehicles with a 5x114.3 bolt pattern. Compatible platforms include:
| Year | Make | Model | Notes |
|---|---|---|---|
| 2009 | Nissan | 370Z | 5x114.3 |
| 2010 | Nissan | 370Z | 5x114.3 |
| 2011 | Nissan | 370Z | 5x114.3 |
| 2012 | Nissan | 370Z | 5x114.3 |
| 2013 | Nissan | 370Z | 5x114.3 |
| 2014 | Nissan | 370Z | 5x114.3 |
| 2015 | Nissan | 370Z | 5x114.3 |
| 2016 | Nissan | 370Z | 5x114.3 |
| 2017 | Nissan | 370Z | 5x114.3 |
| 2018 | Nissan | 370Z | 5x114.3 |
| 2019 | Nissan | 370Z | 5x114.3 |
| 2020 | Nissan | 370Z | 5x114.3 |
| 2015 | Ford | Mustang | 5x114.3 (S550) |
| 2016 | Ford | Mustang | 5x114.3 (S550) |
| 2017 | Ford | Mustang | 5x114.3 (S550) |
| 2018 | Ford | Mustang | 5x114.3 (S550) |
| 2019 | Ford | Mustang | 5x114.3 (S550) |
| 2020 | Ford | Mustang | 5x114.3 (S550) |
| 2021 | Ford | Mustang | 5x114.3 (S550) |
| 2022 | Ford | Mustang | 5x114.3 (S550) |
| 2005 | Ford | Mustang | 5x114.3 (S197) |
| 2006 | Ford | Mustang | 5x114.3 (S197) |
| 2007 | Ford | Mustang | 5x114.3 (S197) |
| 2008 | Ford | Mustang | 5x114.3 (S197) |
| 2009 | Ford | Mustang | 5x114.3 (S197) |
| 2010 | Ford | Mustang | 5x114.3 (S197) |
| 2011 | Ford | Mustang | 5x114.3 (S197) |
| 2012 | Ford | Mustang | 5x114.3 (S197) |
| 2013 | Ford | Mustang | 5x114.3 (S197) |
| 2014 | Ford | Mustang | 5x114.3 (S197) |
| 2015 | Subaru | WRX | 5x114.3 |
| 2016 | Subaru | WRX | 5x114.3 |
| 2017 | Subaru | WRX | 5x114.3 |
| 2018 | Subaru | WRX | 5x114.3 |
| 2019 | Subaru | WRX | 5x114.3 |
| 2020 | Subaru | WRX | 5x114.3 |
| 2021 | Subaru | WRX | 5x114.3 |
| 2022 | Subaru | WRX | 5x114.3 |
| 2013 | Subaru | BRZ | 5x114.3 |
| 2014 | Subaru | BRZ | 5x114.3 |
| 2015 | Subaru | BRZ | 5x114.3 |
| 2016 | Subaru | BRZ | 5x114.3 |
| 2017 | Subaru | BRZ | 5x114.3 |
| 2018 | Subaru | BRZ | 5x114.3 |
| 2019 | Subaru | BRZ | 5x114.3 |
| 2020 | Subaru | BRZ | 5x114.3 |
| 2022 | Subaru | BRZ | 5x114.3 |
| 2023 | Subaru | BRZ | 5x114.3 |
| 2013 | Scion | FR-S | 5x114.3 |
| 2014 | Scion | FR-S | 5x114.3 |
| 2015 | Scion | FR-S | 5x114.3 |
| 2016 | Scion | FR-S | 5x114.3 |
| 2022 | Toyota | GR86 | 5x114.3 |
| 2023 | Toyota | GR86 | 5x114.3 |
| 2007 | Mitsubishi | Lancer Evolution | 5x114.3 |
| 2008 | Mitsubishi | Lancer Evolution | 5x114.3 |
| 2009 | Mitsubishi | Lancer Evolution | 5x114.3 |
| 2010 | Mitsubishi | Lancer Evolution | 5x114.3 |
| 2011 | Mitsubishi | Lancer Evolution | 5x114.3 |
| 2012 | Mitsubishi | Lancer Evolution | 5x114.3 |
| 2013 | Mitsubishi | Lancer Evolution | 5x114.3 |
| 2014 | Mitsubishi | Lancer Evolution | 5x114.3 |
| 2015 | Mitsubishi | Lancer Evolution | 5x114.3 |
Specifications
| Spec | Detail |
|---|---|
| Part Number (MPN) | TM88514356 |
| UPC | Verify at time of order |
| Brand | Konig |
| Series | Tandem |
| Diameter | 18 in |
| Width | 8 in |
| Bolt Pattern | 5x114.3 |
| Offset (ET) | +35mm |
| Center Bore | 73.1mm |
| Finish | Gloss Graphite |
| Construction | Cast aluminum, 1-piece |
| Spokes | 6-spoke |
| Load Rating | 1,521 lbs |
| Lug Seat | 60-degree conical (acorn) |
| TPMS Compatible | Yes |
| Sold As | Single wheel |
What's Included
- 1x Konig Tandem TM88514356 wheel (18x8 5x114.3 ET35 Gloss Graphite)
- 1x Matching center cap
Frequently Asked Questions
What vehicles does the Konig Tandem TM88514356 fit?
The TM88514356 fits any vehicle running a 5x114.3 bolt pattern with a hub bore of 73.1mm or smaller. This covers a wide range of Nissan, Ford, Subaru, Toyota, Scion, and Mitsubishi platforms.
Is the Konig Tandem TM88514356 cast or flow formed?
The TM88514356 is a 1-piece cast aluminum wheel. Cast construction provides solid structural rigidity for street driving and daily use.
What lug nuts work with the Konig Tandem TM88514356?
Use 60-degree conical seat (acorn) lug nuts in the thread pitch specific to your vehicle. Common 5x114.3 platforms use M12x1.25 or M12x1.5. Factory OEM lug nuts are typically not compatible with aftermarket wheels.
What tire size fits the Konig Tandem TM88514356 (18x8)?
An 18x8 wheel typically accepts tires from 225 to 255 wide. Common choices for a 5x114.3 sport sedan or coupe include 235/40R18 or 245/40R18. Confirm with your tire supplier.
Does the Konig Tandem TM88514356 fit the Subaru WRX?
Yes. The 2015 to 2022 Subaru WRX uses a 5x114.3 bolt pattern and is a confirmed fitment vehicle for the TM88514356. Verify hub bore and brake caliper clearance for your specific trim.
What is the warranty on the Konig Tandem TM88514356?
Konig provides a lifetime structural warranty and a 1-year finish warranty to the original purchaser on the TM88514356, covering defects in materials and workmanship under normal use conditions.
Will the Konig Tandem TM88514356 clear factory brakes on a Nissan 370Z?
The 370Z factory Brembo front calipers on the Sport package are large. Mock-up the TM88514356 before purchasing tires to verify spoke-to-caliper clearance is adequate. Most 18-inch wheels clear the standard 370Z brakes without issue.
Does the Konig Tandem TM88514356 support TPMS sensors?
Yes. The TM88514356 is TPMS compatible. Have your tire installer retain your OEM sensors during mounting and balancing.
Installation Notes
Clean hub and wheel mounting surfaces before installation. Torque lug nuts in a star pattern to the vehicle manufacturer's specification using a calibrated torque wrench. Re-torque after the first 25 to 50 miles. Avoid final-torquing with an impact wrench. Verify adequate clearance at full suspension compression and full steering lock before driving the TM88514356.
Konig
Konig wheels combine flow-forming technology with bold styling to produce lighter, stronger rims without the cost of fully forged construction. Their catalog spans concave multi-spoke designs to aggressive deep-lip profiles, giving you fitment options across a broad range of vehicles and offsets.Popular UpgradesThe Konig Hypergram is a standout in the flow-formed lineup, offering a monoblock multi-spoke design in weights that rival much more expensive forged wheels. The Konig Ampliform uses a similar process with a more concave, motorsport-influenced look. Both are available in multiple finishes including matte black, hyper silver, and gloss white.What is flow-forming and why does it matter?Flow-forming (also called flow-forging or rim-rolling) starts with a cast aluminum barrel, then uses high-pressure rollers to stretch and compress the barrel wall. This aligns the grain structure of the aluminum, increasing tensile strength and allowing the barrel to be thinner and lighter than a...
View Konig Products
Wheels & Tires
Shop aftermarket wheels and tires at Black Ops Auto Works for performance wheels, forged wheels, cast wheels, flow formed wheels, truck wheels, off-road wheels, sport truck tires, all-terrain tires, mud-terrain tires, performance tires, wheel spacers, lug nuts, wheel bolts, hubcentric rings, center caps, valve stems, TPMS sensors, tire tubes, and wheel accessories. This collection is built for cars, trucks, SUVs, Jeeps, performance builds, off-road vehicles, street setups, track-inspired builds, and custom wheel fitment. Use this Wheels & Tires collection to find the right setup by vehicle platform, wheel size, bolt pattern, offset, tire size, finish, brand, and driving goal. Performance wheels can improve styling and fitment, forged and flow formed wheels support strength and weight savings, truck and off-road wheels improve stance and utility, and tire upgrades help match your build to street, track, all-season, all-terrain, or mud-terrain driving. Shop Wheels & Tires by C...
View Wheels & Tires Products
Wheels - Cast
Cast Wheels, Aftermarket Rims & Performance Wheel Upgrades Shop premium cast wheels, aftermarket rims, performance wheels, off-road wheels, truck wheels, SUV wheels, Jeep wheels, drag wheels, racing wheels, street wheels, bronze wheels, black wheels, polished wheels, beadlock wheels, Bead Grip wheels, and vehicle-specific wheel upgrades at Black Ops Auto Works. This collection is built for drivers who want better styling, proper fitment, stronger stance, improved performance appearance, and dependable wheel options for cars, trucks, SUVs, Jeeps, off-road builds, drag setups, and street performance vehicles. Whether you are upgrading a Jeep Grand Cherokee, Jeep Trackhawk, Dodge Durango, Dodge Charger, Dodge Challenger, Ford F-150, Ford Super Duty, Toyota Tacoma, Toyota Tundra, Toyota 4Runner, Chevrolet Silverado, GMC Sierra, Subaru WRX, Honda Civic, BMW, Corvette, or a custom performance build, our Wheels - Cast collection includes high-quality cast wheels designed for style, fit...
View Wheels - Cast Products


