-9%
Sold out
Click to zoom in
Kooks 1-3/4" x 3" Long Tube Headers & Catted Y-Pipe for 2007 and 2013 Cadillac Escalade / Chevrolet Silverado 1500 / GMC Sierra 1500 4.8L/5.3L
The Kooks 2851H220 1-3/4-inch long tube headers and catted Y-pipe kit delivers the complete bolt-on exhaust upgrade for 2007 and 2013 Cadillac Escalade, Chevrolet Silverado 1500, and GMC Sierra 1500 with the 4.8L or 5.3L V8, replacing factory manifolds to unlock dyno-proven gains of 40 and 55 rear-wheel horsepower and 35 and 50 lb-ft of torque through equal-length primaries, merged collectors, and a high-flow 3-inch to OEM outlet catted Y-pipe that connects directly to the stock mid-section for unrestricted exhaust flow from low-end torque to high-RPM pulls.
Handcrafted from T304 aircraft-quality stainless steel with 3/8-inch laser-cut flanges, full TIG welds, and 300-cell metallic substrate catalytic converters, this system supports up to 650 HP while maintaining 49-state emissions compliance and improving throttle response for quicker acceleration during towing up to 10,000 lbs or daily highway passing. The precision design preserves ground clearance and heat management for work-ready trucks and SUVs without sacrificing the deep V8 rumble that enhances cabin experience.
For Escalade, Silverado, and Sierra owners with 4.8L or 5.3L engines seeking immediate power and torque improvements with durable, emissions-legal construction, the 2851H220 kit unlocks the engine's full potential for job sites, trails, or performance driving.
Key Features
- 1-3/4-inch equal-length mandrel-bent primaries for strong low-end torque
- 3-inch catted Y-pipe with high-flow metallic substrate
- Full T304 stainless steel with TIG welds and 3/8-inch flanges
- Merged collectors for maximum exhaust velocity
- Direct bolt-on to OEM mid-pipe no cutting required
- Dyno gains of 40 and 55 RWHP and 35 and 50 RWTQ on stock engines
Product Notes
- 49-state EPA compliant not for sale or use in California or CARB states without exemption
- Fits all cab/bed configurations with 4.8L or 5.3L V8
- Includes O2 sensor extensions and and EGR provisions
California Proposition 65: Contains chemicals known to the State of California to cause cancer or reproductive harm.
Warranty: Limited lifetime on stainless construction to original purchaser.
Installation Notes
- Professional installation recommended lift required
- Remove factory manifolds and bolt headers to cylinder heads
- Connect Y-pipe to collectors and OEM mid-section with supplied hardware
- Torque flanges to 25-30 ft-lbs and run drive cycle for ECU adaptation
This Part Fits
| Year | Make | Model | Submodel/Engine |
|---|---|---|---|
| 2007 and 2013 | Cadillac | Escalade | Base, ESV 4.8L/5.3L V8 |
| 2007 and 2013 | Chevrolet | Silverado 1500 | WT, LT, LTZ 4.8L/5.3L V8 |
| 2007 and 2013 | GMC | Sierra 1500 | Work Truck, SLE, SLT 4.8L/5.3L V8 |
Note: Fits all cab styles and drivetrains with 4.8L or 5.3L V8. Excludes 6.0L/6.2L or diesel models.
What's Included in the Purchase
- (2) 1-3/4" x 3" Long-Tube T304 Stainless Headers with Merged Collectors
- (1) 3" x OEM Outlet Catted Stainless Y-Pipe
- Gaskets, Stage 8 Locking Header Bolts, and Hardware Kit
- O2 Sensor Extensions
- Detailed Installation Instructions
- Part Number: Kooks 2851H220
Why Choose Kooks?
- Over 60 years of exhaust engineering with NHRA, NASCAR, and SCCA championships
- Handcrafted in the USA from T304 aircraft-quality stainless steel
- Limited lifetime warranty and dyno-proven for reliable power
Frequently Asked Questions
-
Q: Does this fit my 2010 Escalade ESV 5.3L?
A: Yes, direct bolt-on for all 2007 and 2013 Escalade/Silverado/Sierra with 4.8L/5.3L -
Q: Will it cause a check engine light?
A: No, catted Y-pipe and extensions maintain proper O2 sensor function -
Q: What power gains can I expect?
A: 40 and 55 RWHP and 35 and 50 RWTQ on stock tune, more with ECU optimization -
Do Kooks headers require a tune after installation?
Yes. A professional tune is strongly recommended after installing long tube headers. The significant improvement in exhaust flow changes air fuel ratios and requires ECM recalibration to achieve optimal power output and safe operation. -
Will these headers void my factory powertrain warranty?
Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed an aftermarket part unless they prove the component directly caused the failure. Consult your dealer for specifics on your situation. -
Q: Do these Kooks headers require a tune after installation?
A: Yes. A professional tune is strongly recommended after installing long tube headers. The significant improvement in exhaust flow changes air fuel ratios and requires ECM recalibration to achieve optimal power output and safe operation. -
Q: Will Kooks headers void my factory powertrain warranty?
A: Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed an aftermarket part unless they prove the component directly caused the failure in question. Consult your dealer for specifics. -
Q: What warranty does Kooks provide?
A: Kooks products are backed by a limited lifetime warranty to the original purchaser against defects in materials and workmanship. Racing and competition use applications may have specific warranty exclusions. Contact Kooks Performance directly for warranty details.
Shipping & Handling
- Method: UPS or Fed Ex Ground.
- Availability: Typically ships same day or next if in stock.
- Packaging: Heavy-duty box with foam protection.
Chevrolet Silverado Parts & Accessories
There are many parts and accessories available for the Chevy Corvette, Black Ops Auto Works has everything for your specific needs. Be sure to do your research, choose the parts that fit your specific model and budget. As always, contact our experienced sales team if you have any questions. Check out the many Chevy Corvette parts and accessories available below. Find all the latest Air Intake Systems,Brakes, Rotors & Pads, Exhaust Systems, Engine & Cooling (Radiators), Exterior Trim Accessories, Floor Mats, Interior Accessories, Lighting, Performance Parts, Suspension, Wheels & Tires and many other Special Offers for your Chevy Corvette.
View Chevrolet Silverado Parts & Accessories Products
Exhaust Systems
Black Ops Auto Works carries one of the largest selections of performance exhaust systems available online, with 7,700+ products covering cat-back exhausts, axle-back exhausts, turbo-back systems, downpipes, headers, mid-pipes, X-pipes, H-pipes, mufflers, resonators, catalytic converters, exhaust tips, and every component in between. Whether you're building a street car, a daily driver, a diesel truck, or a track build, the right exhaust upgrade is here. Shop by Exhaust System Type Cat-Back Exhaust Systems: The most popular performance exhaust upgrade. Replaces everything from the catalytic converter back for improved sound, better flow, and premium tip styling. Available in single exit, dual exit, and quad exit configurations. Axle-Back Exhaust Systems: A simpler bolt-on that replaces the rear section from the axle back. Best for drivers who want an improved exhaust note and cleaner tip appearance without a full system swap. Headers and Manifolds: Long tube headers and shorty h...
View Exhaust Systems Products
Headers & Manifolds
Performance headers and exhaust manifolds are among the most effective bolt-on upgrades for improving exhaust scavenging, increasing horsepower, and giving your engine a more aggressive exhaust note. Whether you're building a street machine, a track car, or a diesel work truck, the right header or manifold set unlocks real performance gains across the RPM range. Popular Upgrades Top-selling header and manifold products include long-tube headers from BBK and Kooks for V8 muscle cars and trucks, stainless steel shorty headers from Stainless Works for tight engine bay fitments, high-flow cast iron exhaust manifolds for diesel platforms from BD Diesel and ATS Diesel, and turbo manifolds from aFe Power and Invidia for forced-induction builds requiring optimized turbo positioning. What is the difference between long-tube and shorty headers? Long-tube headers route exhaust primaries farther down the chassis before merging at a collector, which improves mid-range and top-end power but requi...
View Headers & Manifolds Products
Kooks Exhaust
Shop Kooks Headers and Kooks Exhaust systems at Black Ops Auto Works for premium American-made performance exhaust upgrades. This collection includes Kooks long tube headers, shorty headers, cat-back exhaust systems, axle-back exhaust systems, connection pipes, catted connection pipes, X-pipes, Y-pipes, resonator delete pipes, catalytic converters, GREEN catalytic converters, header bolt kits, oxygen sensor extensions, exhaust clamps, and exhaust hardware for street, strip, track, and high-horsepower performance builds. Kooks Headers is known for stainless steel construction, precision fitment, aggressive exhaust sound, and proven motorsports performance. Whether you are upgrading a Ford Mustang, Chevrolet Corvette, Chevrolet Camaro, Dodge Challenger, Dodge Charger, Jeep Grand Cherokee SRT, Jeep Trackhawk, Dodge Durango, Ram 1500, Ford F-150, Ford Raptor, Cadillac Escalade V, or Chevrolet Silverado, Black Ops Auto Works carries Kooks exhaust parts designed for performance, durabilit...
View Kooks Exhaust Products