-9%
Click to zoom in
Kooks 1-7/8" x 3" Long Tube Headers & Catted Y-Pipe for 2009 and 2013 Chevrolet Silverado 1500 & GMC Sierra 1500 4.8L/5.3L/6.0L
The Kooks 2855H420 1-7/8-inch long tube headers and catted Y-pipe kit delivers the complete bolt-on exhaust upgrade for 2009 and 2013 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks with the 4.8L, 5.3L, or 6.0L V8, replacing factory manifolds to unlock dyno-proven gains of 45 and 60 rear-wheel horsepower and 40 and 55 lb-ft of torque through equal-length primaries, merged collectors, and a high-flow 3-inch to OEM outlet catted Y-pipe that connects directly to the stock mid-section for unrestricted exhaust flow from low-end torque to high-RPM pulls.
Handcrafted from T304 aircraft-quality stainless steel with 3/8-inch laser-cut flanges, full TIG welds, and 300-cell metallic substrate catalytic converters, this system supports up to 700 HP while maintaining 49-state emissions compliance and improving throttle response for quicker acceleration during towing up to 10,000 lbs or daily highway passing. The precision design preserves ground clearance and heat management for work-ready trucks without sacrificing the deep V8 rumble that enhances cabin experience.
For Silverado and Sierra owners with 4.8L, 5.3L, or 6.0L engines seeking immediate power and torque improvements with durable, emissions-legal construction, the 2855H420 kit unlocks the engine's full potential for job sites, trails, or performance driving.
Key Features
- 1-7/8-inch equal-length mandrel-bent primaries for optimal scavenging
- 3-inch catted Y-pipe with high-flow metallic substrate
- Full T304 stainless steel with TIG welds and 3/8-inch flanges
- Merged collectors for maximum exhaust velocity
- Direct bolt-on to OEM mid-pipe no cutting required
- Dyno gains of 45 and 60 RWHP and 40 and 55 RWTQ on stock engines
Product Notes
- 49-state EPA compliant not for sale or use in California or CARB states without exemption
- Fits all cab/bed configurations with 4.8L, 5.3L, or 6.0L V8
- Includes O2 sensor extensions and EGR provisions
California Proposition 65: Contains chemicals known to the State of California to cause cancer or reproductive harm.
Warranty: Limited lifetime on stainless construction to original purchaser.
Installation Notes
- Professional installation recommended lift required
- Remove factory manifolds and bolt headers to cylinder heads
- Connect Y-pipe to collectors and OEM mid-section with supplied hardware
- Torque flanges to 25-30 ft-lbs and run drive cycle for ECU adaptation
This Part Fits
| Year | Make | Model | Submodel/Engine |
|---|---|---|---|
| 2009 and 2013 | Chevrolet | Silverado 1500 | WT, LT, LTZ, Hybrid 4.8L/5.3L/6.0L V8 |
| 2009 and 2013 | GMC | Sierra 1500 | Work Truck, SLE, SLT, Denali 4.8L/5.3L/6.0L V8 |
Note: Fits all cab styles and drivetrains with 4.8L, 5.3L, or 6.0L V8. Excludes 6.2L.
What's Included in the Purchase
- (2) 1-7/8" x 3" Long-Tube T304 Stainless Headers with Merged Collectors
- (1) 3" x OEM Outlet Catted Stainless Y-Pipe
- Gaskets, Stage 8 Locking Header Bolts, and Hardware Kit
- O2 Sensor Extensions
- Detailed Installation Instructions
- Part Number: Kooks 2855H420
Why Choose Kooks?
- Over 60 years of exhaust engineering with NHRA, NASCAR, and SCCA championships
- Handcrafted in the USA from T304 aircraft-quality stainless steel
- Limited lifetime warranty and dyno-proven for reliable power
Frequently Asked Questions
-
Q: Does this fit my 2010 Silverado LT 5.3L?
A: Yes, direct bolt-on for all 2009 and 2013 Silverado/Sierra 1500 with 4.8L/5.3L/6.0L -
Q: Will it cause a check engine light?
A: No, catted Y-pipe and extensions maintain proper O2 sensor function -
Q: What power gains can I expect?
A: 45 and 60 RWHP and 40 and 55 RWTQ on stock tune, more with ECU optimization -
Do Kooks headers require a tune after installation?
Yes. A professional tune is strongly recommended after installing long tube headers. The significant improvement in exhaust flow changes air fuel ratios and requires ECM recalibration to achieve optimal power output and safe operation. -
Will these headers void my factory powertrain warranty?
Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed an aftermarket part unless they prove the component directly caused the failure. Consult your dealer for specifics on your situation. -
Q: Do these Kooks headers require a tune after installation?
A: Yes. A professional tune is strongly recommended after installing long tube headers. The significant improvement in exhaust flow changes air fuel ratios and requires ECM recalibration to achieve optimal power output and safe operation. -
Q: Will Kooks headers void my factory powertrain warranty?
A: Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed an aftermarket part unless they prove the component directly caused the failure in question. Consult your dealer for specifics. -
Q: What warranty does Kooks provide?
A: Kooks products are backed by a limited lifetime warranty to the original purchaser against defects in materials and workmanship. Racing and competition use applications may have specific warranty exclusions. Contact Kooks Performance directly for warranty details.
Shipping & Handling
- Method: UPS or Fed Ex Ground.
- Availability: Typically ships same day or next if in stock.
- Packaging: Heavy-duty box with foam protection.
Chevrolet Silverado Parts & Accessories
Chevrolet Silverado parts and accessories for the 1500, 2500 HD, and 3500 HD are stocked at Black Ops Auto Works. Shop cold air intakes, cat-back and axle-back exhaust systems, leveling and lift kits, lowering kits, brake pads, rotors and big brake kits, tonneau covers, grille guards, running boards, floor liners, oil catch cans, fuel injectors, LED lighting, and cast and forged wheels for Silverado 1500, 2500 HD, 3500 HD, Trail Boss, RST, LTZ, High Country, ZR2, and Duramax Diesel trims. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2,566 Chevrolet Silverado SKUs across performance, appearance, towing, and off-road categories. What This Collection Covers The Chevrolet Silverado lineup spans the light-duty 1500 and the heavy-duty 2500 HD and 3500 HD, built on the GM T1XX and related platforms. This collection combines OE-style replacement parts with performance and appearance ...
View Chevrolet Silverado Parts & Accessories Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
Headers & Manifolds
Performance headers and exhaust manifolds for gas and diesel platforms are stocked at Black Ops Auto Works. Shop long-tube headers, shorty headers, turbo manifolds, and diesel exhaust manifolds for Mustang, Camaro, Ram HEMI trucks, Ford Powerstroke, Dodge Cummins, and GM Duramax platforms. Every product is filterable by tube diameter, header length, and vehicle year, make, model, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 459 header and manifold SKUs across gas and diesel applications. What This Category Covers Performance headers and exhaust manifolds are among the most effective bolt-on upgrades for improving exhaust scavenging, increasing horsepower, and giving your engine a more aggressive exhaust note. Whether you are building a street machine, a track car, or a diesel work truck, the right header or manifold set unlocks real performance gains across the RPM range. Long-Tube Versus Shorty Headers Long-tube headers route exhaust prim...
View Headers & Manifolds Products
Kooks Exhaust
Kooks Exhaust parts and accessories for American muscle cars and performance trucks are stocked at Black Ops Auto Works. Shop stainless steel long tube headers, shorty headers, catted connection pipes, mid pipes, X-pipes, H-pipes, cat-back systems, axle-back systems, resonator deletes, GREEN catalytic converters, O2 extensions, clamps and header hardware for Mustang, Camaro, Corvette, Challenger, Charger, Silverado, F-150 and Ram HEMI builds. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 174 Kooks exhaust SKUs across vehicle-specific fitment, performance upgrades, replacement parts, installation hardware and custom build needs. What This Collection Covers Kooks builds vehicle-specific stainless steel exhaust components for naturally aspirated, supercharged and turbocharged V8 street cars, track cars and HD truck builds. The range includes complete header-to-tailpipe paths as we...
View Kooks Exhaust Products