Kooks 2016+ Cadillac CTS-V LT4 6.2L 2in x 3in SS LT Headers w/ Green Catted SS Connection Pipes

Maximum Flow, Full Emissions Compliance: Long Tube Power Without the Compromise

The Kooks 2312H630 2-inch x 3-inch long tube headers and GREEN catted connection pipes kit unleashes the full potential of the 2016 and 2019 Cadillac CTS-V with the supercharged 6.2L LT4 V8, replacing factory manifolds to deliver dyno-proven gains of 70 and 90 rear-wheel horsepower and 80 and 100 lb-ft of torque through equal-length primaries, merged collectors, and high-flow 3-inch GREEN catted pipes that bolt directly to the OEM mid-pipe for seamless integration and unrestricted flow under boost pressures exceeding 15 PSI.

Handcrafted from T304 aircraft-quality stainless steel with 3/8-inch laser-cut flanges, full TIG welds, and 400-cell metallic substrate GREEN catalytic converters, this system supports over 1,000 HP while remaining 49-state emissions compliant and preserving the CTS-V's refined yet ferocious supercharged soundtrack without drone. The precision design maintains factory ground clearance and heat shielding for daily-driven luxury performance sedans.

For CTS-V owners who demand championship-level performance with street-legal reliability, the 2312H630 kit is the race-winning, complete bolt-on solution trusted by supercharged GM enthusiasts worldwide.

Key Features

• 2-inch equal-length mandrel-bent primaries for maximum scavenging
• 3-inch GREEN high-flow metallic catalytic converters
• Full T304 stainless steel with TIG welds and 3/8-inch flanges
• Merged collectors for optimal exhaust velocity
• Direct bolt-on to OEM mid-pipe no cutting required
• Dyno gains of 70 and 90 RWHP and 80 and 100 RWTQ

Product Notes

• 49-state EPA compliant not for sale or use in California or CARB states without exemption
• Fits 2016 and 2019 Cadillac CTS-V with 6.2L LT4 supercharged V8
• Includes O2 extensions and all necessary hardware

California Proposition 65: Contains chemicals known to the State of California to cause cancer or reproductive harm.

Warranty: Limited lifetime on stainless construction and 25,000 miles on catalytic converters to original purchaser.

Installation Notes

• Professional installation required lift and exhaust experience needed
• Remove factory manifolds and bolt headers to cylinder heads
• Connect catted pipes to collectors and OEM mid-pipe
• Torque flanges to 25-30 ft-lbs and run drive cycle for ECU adaptation

This Part Fits

Note: Fits all 2016 and 2019 CTS-V sedan with factory exhaust. Automatic only.

What's Included in the Purchase

• (2) 2" x 3" Long-Tube T304 Stainless Headers with Merged Collectors
• (2) 3" GREEN Catted Connection Pipes
• Gaskets, Stage 8 Locking Bolts, Clamps and Hardware
• O2 Sensor Extensions
• Detailed Installation Instructions
• Part Number: Kooks 2312H630

Why Choose Kooks?

• Over 60 years of championship-winning exhaust engineering
• Handcrafted in the USA from T304 aircraft-quality stainless steel
• Limited lifetime warranty and dyno-proven performance

Frequently Asked Questions

• Q: Does this fit my 2018 CTS-V?
  A: Yes, direct bolt-on for all 2016 and 2019 CTS-V
• Q: Will it cause a check engine light?
  A: No, GREEN cats and extensions maintain proper O2 function
• Q: How loud is it?
  A: Aggressive supercharged roar at WOT, refined and quiet at cruise
• Do Kooks headers require a tune after installation?
  Yes. A professional tune is strongly recommended after installing long tube headers. The significant improvement in exhaust flow changes air fuel ratios and requires ECM recalibration to achieve optimal power output and safe operation.
• Will these headers void my factory powertrain warranty?
  Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed an aftermarket part unless they prove the component directly caused the failure. Consult your dealer for specifics on your situation.
• Q: Do these Kooks headers require a tune after installation?
  A: Yes. A professional tune is strongly recommended after installing long tube headers. The significant improvement in exhaust flow changes air fuel ratios and requires ECM recalibration to achieve optimal power output and safe operation.
• Q: Will Kooks headers void my factory powertrain warranty?
  A: Under the Magnuson-Moss Warranty Act, a manufacturer cannot void your vehicle warranty simply because you installed an aftermarket part unless they prove the component directly caused the failure in question. Consult your dealer for specifics.
• Q: What warranty does Kooks provide?
  A: Kooks products are backed by a limited lifetime warranty to the original purchaser against defects in materials and workmanship. Racing and competition use applications may have specific warranty exclusions. Contact Kooks Performance directly for warranty details.

Shipping & Handling

• Method: UPS or Fed Ex Ground.
• Availability: Typically ships same day or next if in stock.
• Packaging: Heavy-duty box with foam protection.