KYB Shocks & Struts Strut Mounts Front CHEVROLET Colorado (2WD) 2004-07 GMC Canyon (2WD) 2004-05 LEX

Shop alignment components, camber kits, caster kits, and adjustable control arms at Black Ops Auto Works. Find vehicle-specific parts for correcting suspension alignment or preparing a performance setup, including toe links, adjustment cams, camber plates, and replacement mounts. Choose components based on your vehicle, suspension configuration, and measured alignment needs. Camber, Caster, and Toe Correction Camber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment. This collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster...

Find Chevrolet Colorado parts with generation, cab and bed measurements established. Window accessories, bed mats and mud protection must match the actual body and installed trim. Cab Windows and Bed Coverage Match deflectors to exact cab doors, glass and mounting method. A four-piece crew-cab set requires the stated body and production coverage. Bed mats need the actual bed length and liner configuration. A mat specified for a drop-in liner should be compared with that installed arrangement, including tailgate and tie-down clearance. Molded Guards and Universal Flaps Molded guards need the actual flares, steps and wheel-arch trim. Match front and rear positions independently and check stated exclusions. Universal flaps require measured width, attachment and hardware. Recheck tire and suspension clearance after changes to wheel offset or ride height. Choose Your Part Identify generation, cab and measured bed. Match window contours and installation method. Confirm bed-mat and liner ...

Find GMC Canyon bed protection, hood protectors, window deflectors and mud guards by exact cab, bed and production range. Match the surface and body configuration each accessory covers. Bed and Tailgate Coverage For bed mats, preserve the stated bed length, crew-cab application and drop-in-liner requirement. A mat intended for a drop-in liner should be compared with the bed equipment actually installed. Check whether the package covers the bed floor, tailgate or a larger area. Bed and tailgate mats are separate unless expressly supplied together. Hood, Windows and Fender Applications Compare the listed 2015–2022 and 2023–2026 hood-protector applications separately. Match actual hood profile and mounting requirements to the selected part. For deflectors, identify exact cab, windows and tape-on installation. Match front or rear mud guards to the actual fenders and compare supplied piece count. Choose Your Part Record production, cab and bed length. Identify existing drop-in liner or ...

Find Isuzu i-280 floor protection, lighting and access-step options by exact cab, year and installed equipment. Shared Colorado or Canyon titles require the selected part’s explicit i-280 coverage. Cab Floors and Lighting Connections Match liners to regular or extended cab floor contours, seats, transmission area and retention points. Compare molded liners with general floor mats by actual application and coverage. For headlights, match housing shape, connectors, lamp functions and package contents. An I-Series title still needs exact production and installation confirmation. Steps and Service Interfaces Choose running boards by cab, mounting-kit application and actual attachment points rather than length alone. A mesh panel may be an accessory rather than a complete guard. For brake cylinders or suspension mounts, compare actual assembly, position, dimensions and drivetrain restrictions. Match filters and wipers to their exact service interfaces and required size. Choose Your Part ...

Choose Isuzu i-290 floor liners, lighting and wheel hardware by exact year, cab and installed equipment. Confirm actual application before selecting finish or package quantity. Interior and Exterior Mounting Match regular or extended-cab liners to actual floor contours, retention points and seating. Shared Colorado/Canyon coverage does not establish every i-290 configuration. For headlights and running boards, compare exact body attachment and electrical requirements. Review lamps, brackets and mounting-kit pieces expressly supplied. Fastener and Service Specifications Match wheel nuts and locks by thread, seat shape, usable length and wheel requirements. Compare complete six-lug installation kits with small nut packs and check key or tool contents. For brake cylinders and suspension mounts, identify actual axle or position and drivetrain coverage. Filters need exact engine and sealing-interface specifications. Choose Your Part Record exact cab, year and drivetrain. Match floor and...

Shop KYB shocks, struts, mounts, protective components, steering stabilizers, and matched suspension packages by exact manufacturer part number and verified vehicle application. KYB Product Families The collection includes Excel-G, Gas-a-Just, MonoMax, AGX, Strut-Plus, Truck-Plus, K2.0, and application-specific KYB suspension service components. Choose Your Part Match the exact KYB manufacturer part number Confirm year, make, model, factory suspension, and ride height Verify front or rear position plus left or right side when specified Check whether springs, mounts, bearings, boots, bump stops, or hardware are included Review every current KYB application note before ordering Plan for professional installation and alignment when suspension geometry is affected Related Suspension Collections Shocks and Struts Coilovers Suspension Packages Suspension Parts Frequently Asked Questions Should KYB shocks or struts be replaced in pairs? Replacing both dampers on the same axle is gener...

Choose Lexus GX460 interior protection and suspension components for the way the vehicle is equipped. Seating configuration, cargo-floor arrangement and existing suspension matter as much as model year. Floor and Cargo-Liner Coverage Compare front, second-row and cargo pieces separately. The displayed 2010–2012 cargo liner specifies a folded third-row arrangement, while other liners have their own year and seating coverage. Review complete-set contents, retention provisions and floor shape. A front-and-second-row package should not be assumed to include the cargo area or every seating row. Suspension Packages and Supporting Components Identify rear suspension configuration, existing ride height and load requirements before comparing shocks, springs or complete ICON systems. Shared FJ or 4Runner titles need explicit GX460 support. Review the exact package’s control arms, mounts, reservoir routing and required conversions. Confirm wheel/tire clearance and alignment requirements for th...

Plan Lexus GX470 suspension changes as a complete system. The listed ICON Stage 1 application covers 2003–2009 GX470 vehicles, with exact equipment and conversion requirements still essential. System Coverage and Rear Configuration Identify current rear spring or air-suspension equipment, existing lift and intended load. Compare the complete system contents with any required conversion before choosing individual components. Review front coilovers, rear dampers, arms and mounting hardware by exact part number. A rear coilover-conversion listing is a specific installation arrangement, not a universal replacement for every rear setup. Supporting Hardware and Engine Dampers Compare coilover bearings, spacers and reservoir-protection pieces with the actual shock assembly. Shared Toyota-platform titles require explicit GX470 coverage. For a UZ-family crankshaft damper, match the fitted engine, crank interface and accessory-drive arrangement. Record non-original pulleys or engine changes s...

Shop shock mounts, strut mounts, camber plates, caster plates, pillowball upper mounts, motor mounts, and shock hardware from KYB, Tein, Cusco, Synergy Manufacturing, Ridetech, Progressive Suspension, Ground Control, Vorshlag, ISC Suspension, and other suspension mount manufacturers. Find OE-replacement strut mount kits, upgraded pillowball uppers for track and race use, adjustable camber and caster plates for lowered vehicles, heavy-duty off-road shock mounts, and application-specific mounting hardware for cars, trucks, SUVs, and off-road platforms. Shock and strut mounts wear out. Rubber isolators dry out, bearings fail, and the resulting clunks, vibrations, or alignment drift kill the ride quality even on a car with fresh dampers. This category covers everything from KYB direct-replacement strut mount kits for daily drivers to Cusco and Tein pillowball uppers for sport builds, plus dedicated camber and caster plates for lowered street, autocross, and track cars. Filter by moun...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

Shop Toyota 4Runner exhaust and exterior accessories by exact generation, engine and body. Keep 2025-on applications separate from earlier hood, window and fender requirements. Generation-Specific Exterior Protection Hood shields, ventvisors and fender flares require precise body/year coverage. A 1999–2002 flare set and a 2010–2024 deflector reference describe different applications. Confirm adhesive or other mounting requirements, supplied pieces and clearance with existing accessories. Another SUV’s hood-protector title is not a 4Runner application. N500 2.4T Exhaust Coverage AWE’s N500 4Runner 0FG system supports specified hybrid and non-hybrid applications. Confirm exact production and powertrain rather than extending it to earlier generations. The cat-back uses a high-clearance BashGuard outlet and drone-control technology. Review complete supplied components and installation interfaces with existing equipment. Choose Your Part Identify generation, engine and hybrid/non-hybrid...

Shop Toyota FJ Cruiser cabin, exterior and suspension applications by exact production and equipment. Confirm transmission-specific floor fit and current ride-height setup before ordering. Cabin and Exterior Coverage Front liners, second-row pieces and behind-second-seat cargo liners have different coverage. Match exact floor contours and any automatic-transmission restriction. Fender flares, hood protectors and deflectors need the correct body geometry and complete mounting contents. Confirm clearances with existing accessories. Suspension and Steering Installation A rear shock listed for a specific lift range must match actual ride height, travel and mounting requirements. Lift-range wording is separate from a complete suspension kit. Tie rods and sway-bar links require the exact steering/suspension application. Shared Tacoma or 4Runner references need manufacturer support for the installed FJ equipment. Choose Your Part Identify production, transmission and current ride height. ...

Shop Toyota Tacoma bed protection, exterior accessories and exhaust applications by generation, cab, bed length and engine. Match complete coverage before choosing a package or finish. Bed, Tailgate and Body Coverage Five-foot crew-cab references and later-generation tailgate mats have different applications. Confirm actual bed dimensions, liner type and whether existing spray-on protection affects fit. A bed mat, bed/tailgate package and full liner have different contents. Fender flares and hood shields separately require precise body/year coverage. Exhaust and Installation Configuration The displayed Gen 3 AWE 0FG references require the specified engine and production application. Do not extend them to another generation or powertrain by Tacoma naming alone. Compare BashGuard/no-tip and tip configurations, then review clearances with current springs, spare tire and other accessories. Confirm all supplied piping and mounting hardware. Choose Your Part Identify generation, cab, bed...