Click to zoom in
Replace a Corroded Factory Front Pipe Without Cutting or Welding
The front pipe on a high mileage Passat 1.8L takes constant heat cycling and road exposure, and once it rusts through or cracks near the flex joint, exhaust leaks and check engine lights tend to follow. The Magnaflow BRExhaust 107-0114 front pipe is a direct fit replacement stamped from stainless steel to resist corrosion far longer than the factory mild steel piece. It bolts in using the factory mounting points with a clamp on outlet connection, and the kit arrives with the gasket and hardware needed to complete the swap in one trip to the driveway.
Key Features
- Direct fit front pipe engineered to OE specifications for a bolt on install
- Stainless steel construction resists rust better than the factory mild steel pipe
- Mandrel bent piping keeps exhaust flow smooth and consistent
- 2.25 inch inlet and 2 inch outlet sized to match factory connections
- Bolt on inlet attachment with a clamp on outlet for straightforward installation
- Backed by Magnaflow's two year unlimited mileage warranty
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 1998-2005 | Volkswagen | Passat | GLS |
| 1998-2005 | Volkswagen | Passat | GLX |
Specifications
| Detail | Value |
|---|---|
| Brand | Magnaflow (BRExhaust) |
| Part Number | 107-0114 |
| UPC | Not published by manufacturer, contact Black Ops Auto Works for verification |
| Material | Stainless Steel |
| Main Pipe Diameter | 2 inches |
| Inlet Diameter | 2.25 inches, bolt on |
| Outlet Diameter | 2 inches, clamp on |
| Bend Type | Mandrel bent |
| Gasket Included | Yes, 3 bolt gasket |
| Warranty | 2 year unlimited mileage |
What's Included
- 1 x Magnaflow BRExhaust 107-0114 front pipe
- 1 x 3 bolt gasket
- 3 x mounting bolts and nuts
- 1 x 2.125 inch sleeve clamp
About Magnaflow
Magnaflow has built a reputation for exhaust components engineered to meet or exceed factory specifications, and its BRExhaust line focuses specifically on direct fit replacement parts designed to restore stock performance and emissions compliance.
FAQ
What is the Magnaflow 107-0114?
It's a direct fit stainless steel front exhaust pipe built to replace the factory front pipe on the 1998 through 2005 Volkswagen Passat 1.8L, including the necessary gasket and mounting hardware for installation.
Is the 107-0114 a universal pipe or built for one vehicle?
The 107-0114 is engineered specifically around the Passat 1.8L's factory routing and mounting points, so it is a direct fit part rather than a universal design.
Does this pipe include a catalytic converter?
No, this is a front pipe kit only. It connects to the factory or existing catalytic converter and downstream exhaust components.
Will this fit both automatic and manual transmission Passats?
This front pipe is designed around the 1.8L engine's factory routing and generally fits both transmission types, but confirming your specific engine code before ordering is recommended.
Do I need new gaskets or clamps to install this?
No, the kit includes a 3 bolt gasket, mounting bolts and nuts, and a sleeve clamp for the outlet connection.
Is welding required to install this front pipe?
No, it's a bolt on and clamp on design that does not require welding or cutting for a standard installation.
Will this pipe trigger a check engine light or fail emissions?
This is a stock replacement style pipe designed to maintain factory exhaust routing and is not intended to bypass emissions equipment, but local inspection requirements can vary and should be checked.
How long does the stainless steel construction typically last?
Stainless steel resists corrosion significantly better than the factory mild steel pipe, so it commonly outlasts the original equipment part under normal driving conditions.
What tools are needed for installation?
A basic socket set, penetrating oil for old bolts, and a way to safely support the vehicle are typically sufficient to install the 107-0114 in a bolt on and clamp on installation.
Install Instructions
- Raise and safely support the vehicle on jack stands
- Apply penetrating oil to the factory front pipe fasteners and allow it to soak
- Remove the factory front pipe from its mounting flange and downstream clamp connection
- Clean the mating surfaces and install the new gasket at the flange
- Position the Magnaflow 107-0114 front pipe and secure the bolt on flange connection
- Install the sleeve clamp at the outlet connection and tighten to specification
- Inspect for proper clearance, then start the engine and check for leaks
Connecting Pipes
Exhaust and intake connecting pipes bridge the gap between major system components, including the downpipe-to-mid-pipe junction, turbocharger outlet to intercooler, and intercooler to throttle body in forced induction systems. Quality connecting pipes in mandrel-bent aluminized steel or stainless steel maintain full internal diameter through every bend to preserve airflow and reduce backpressure.Popular UpgradesDownpipe-to-cat-back connecting pipes in 3-inch diameter aluminized or stainless steel are the most common exhaust connecting pipes, bridging between an upgraded downpipe and a cat-back system that may not align natively. Intercooler pipes in silicone-connected aluminum or stainless steel tubing are essential for routing boost pressure efficiently in turbocharged builds. Custom-length connecting pipes with slip-fit or v-band ends allow precise fitment in tight engine bays.What material is best for exhaust connecting pipes?Stainless steel connecting pipes offer the best long-t...
View Connecting Pipes Products
Exhaust Systems
Black Ops Auto Works carries one of the largest selections of performance exhaust systems available online, with 7,700+ products covering cat-back exhausts, axle-back exhausts, turbo-back systems, downpipes, headers, mid-pipes, X-pipes, H-pipes, mufflers, resonators, catalytic converters, exhaust tips, and every component in between. Whether you're building a street car, a daily driver, a diesel truck, or a track build, the right exhaust upgrade is here. Shop by Exhaust System Type Cat-Back Exhaust Systems: The most popular performance exhaust upgrade. Replaces everything from the catalytic converter back for improved sound, better flow, and premium tip styling. Available in single exit, dual exit, and quad exit configurations. Axle-Back Exhaust Systems: A simpler bolt-on that replaces the rear section from the axle back. Best for drivers who want an improved exhaust note and cleaner tip appearance without a full system swap. Headers and Manifolds: Long tube headers and shorty h...
View Exhaust Systems Products
MagnaFlow
MagnaFlow exhaust products are built around straight-through muffler technology and high-grade stainless steel construction, delivering a smooth, deep exhaust tone and improved flow across a wide range of vehicle platforms. From daily drivers to dedicated performance builds, MagnaFlow offers vehicle-specific fitment with no cutting or welding required on most applications.Popular UpgradesCat-back exhaust systems are the most popular MagnaFlow upgrade, replacing the muffler and everything behind the catalytic converter for a noticeable improvement in sound and flow. Direct-fit catalytic converters are a go-to for owners facing emissions-related replacements who want an OEM-quality part at a competitive price. Builder's kits and universal mufflers serve custom fabricators who need reliable stainless components without a complete system.What makes MagnaFlow exhaust sound different from competitors?MagnaFlow uses a straight-through perforated core design packed with stainless steel mesh...
View MagnaFlow Products
Mid Pipes
Shop mid pipes, X-pipes, H-pipes, connecting pipes, front pipes, link pipes, muffler delete pipes, resonator delete pipes, high-flow cats, and performance exhaust piping at Black Ops Auto Works. This collection includes exhaust mid-pipe upgrades for muscle cars, trucks, SUVs, imports, European performance vehicles, off-road builds, and high-horsepower street or track applications. Mid pipes are a key part of your exhaust system, connecting headers, downpipes, catalytic converters, resonators, mufflers, and cat-back exhaust systems. Whether you want improved exhaust flow, a deeper exhaust tone, reduced restriction, better sound, or a cleaner connection between exhaust components, Black Ops Auto Works carries mid pipes from trusted performance exhaust brands. Shop Mid Pipes by Brand Find performance mid pipes and exhaust components from brands in the Black Ops Auto Works catalog, including Cornerstone Performance, Solo Performance, Borla, Kooks Headers, CORSA Performance, MBRP, MagnaF...
View Mid Pipes Products