Click to zoom in
The Mahle piston ring set identified by manufacturer part number 4075MS-112 is designed to seal combustion pressure, control oil, and transfer heat when matched to the exact piston grooves and finished bore. Final compatibility depends on the complete engine combination and measured dimensions, not the product title alone.
Key Features
- Exact manufacturer part number for application verification
- Measured dimensions organized in the specifications
- Designed for professional engine machining and assembly
- Requires final clearance and compatibility checks before installation
Fitment
| Fitment Status | Universal only by exact ring and piston dimensions |
|---|---|
| Required Verification | Bore, ring-groove dimensions, ring thickness, cylinder count, material, and intended use |
Specifications
| Brand | Mahle |
|---|---|
| Manufacturer Part Number | 4075MS-112 |
| Product Type | Piston Ring Set |
| Fitment Type | Universal |
| Condition | New |
| Manufacturer Guide Match | Exact part number verified |
| Bore Diameter | 4.070 in |
| Ring Preparation | File fit |
What's Included
One new Mahle piston ring set in the exact configuration stated in the specifications. Pistons and installation tools are not included unless explicitly listed.
About Mahle
Mahle develops pistons, piston rings, bearings, filtration, thermal-management, and engine components for original-equipment, replacement, and motorsport applications.
Related Mahle Products
- Shop all Mahle products
- Mahle MS 4.030in +.005in 1.0mm 1.0mm 2.0mm File Fit Rings
- Mahle MS 4.080in +.005in 1.0mm 1.0mm 2.0mm File Fit Rings
- Mahle MS 3.927in+.005in 1.0mm 1.0mm 2.0mm 4cyl File Fit Rings
Frequently Asked Questions
How do I confirm Mahle 4075MS-112 is the correct ring set?
Match the finished bore, piston groove dimensions, top, second, and oil-ring thicknesses, cylinder count, and intended engine use. A matching bore alone is not enough.
Do these piston rings require filing?
The listed preparation is File fit. Measure every ring in its assigned cylinder and follow the current MAHLE instructions for the bore, fuel, boost, heat load, and intended use.
Can piston rings be installed without measuring the cylinders?
No. A qualified machine shop should measure bore diameter, taper, out-of-round, surface finish, piston groove clearance, ring end gap, and oil-ring fit before assembly.
Installation Instructions
Use the current Mahle instructions for part number 4075MS-112 and the engine builder's measured assembly specifications. A qualified machine shop must verify bore finish, clearances, ring gaps, pin fit, lock installation, orientation, balance, deck height, valve clearance, compression ratio, lubrication, and break-in before operation.
Engine
Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...
View Engine Products
Mahle
Shop Mahle forged pistons, diesel piston kits, and performance piston rings by exact manufacturer part number, measured dimensions, and verified engine application. Choosing the Correct Mahle Engine Component Engine components must be selected from the complete measured build, not a similar vehicle or engine name. Confirm the current Mahle part number and every critical dimension with the engine builder before ordering. Match engine code, finished bore, stroke, connecting-rod length, wrist-pin diameter, and cylinder head Confirm crown volume, compression height, compression target, fuel, boost, and intended power level Match piston-ring bore and every groove thickness before machining Verify rings, pins, locks, coatings, and quantity for the exact part number Use professional machining and measured assembly clearances Related Engine Collections Pistons Piston Rings Engine Components Connecting Rods Frequently Asked Questions How do I confirm a Mahle piston kit fits my engine bu...
View Mahle Products