Click to zoom in
Match a 12-valve Cummins build to the correct bowl volume and compression geometry
Mahle 197952235 gives an engine builder a matched piston package for Cummins 5.9L B-Series 12-valve. Compatibility depends on the exact engine code, finished bore, rotating assembly, cylinder head, fuel, and measured clearances.
Key Features
- Set of six M174+ diesel pistons
- Verified 4.035-inch bore configuration
- Matched ring set included
- Designed for measured Cummins 5.9L B-Series 12-valve engine builds
Fitment
| Application Type | Verified Requirement |
|---|---|
| Engine-build specific | Cummins 5.9L B-Series 12-valve builds using a 4.035-inch bore and the complete verified piston geometry |
| Year-make-model mapping | No standalone YMM fitment applies. Verify the exact engine and every build dimension before ordering. |
Specifications
| Detail | Value |
|---|---|
| Brand | Mahle Motorsport |
| Product Type | Diesel Piston Set |
| Engine Family | Cummins 5.9L B-Series 12-valve |
| Bore | 4.035 in |
| Stroke | 4.724 in |
| Connecting Rod Length | 7.559 in |
| Compression Height | 2.817 in |
| Wrist Pin Diameter | 1.575 in |
| Bowl Volume | -47.6 cc |
| Compression Ratio | 16.5:1 |
| Piston Material | M174+ |
| Piston Weight | 1171 g |
| Quantity | Set of 6 |
What's Included
- Six diesel pistons
- Matched piston ring set
- Only the exact hardware packaged by Mahle for this piston set
About Mahle Motorsport
Mahle develops piston systems and engine components for original-equipment and motorsport applications. Its PowerPak and diesel piston packages combine application-specific geometry with materials and ring technology intended for professionally measured engine builds.
Related Parts
- Engine bearings matched to the exact crankshaft and housing measurements
- Connecting rods and fasteners verified for the intended power level
- Gaskets and valvetrain components selected for the final cylinder-head and deck configuration
FAQ
What is the 197952235?It is the Mahle piston package described in the Specifications table for the listed engine family and measured build requirements.
Is this selected by vehicle year alone?No. Engine code, bore, stroke, rod length, wrist pin, cylinder head, compression target, and machine-shop measurements must all agree.
Is machining required?A qualified machine shop must inspect and measure the block, bores, deck, crankshaft, rods, pins, rings, and clearances before assembly.
Are piston rings included?The What's Included section states the verified ring-set contents for this exact package.
Can parts from a similar kit be substituted?No. Pistons, pins, locks, and rings must match the exact dimensions and configuration specified for this package.
What clearances must be checked?Verify piston-to-wall clearance, ring end gaps, pin fit, deck height, piston-to-valve clearance, bearing clearances, and final compression ratio.
Is professional assembly recommended?Yes. These are precision engine components that require cleaning, measurement, balancing, correct orientation, controlled fastener torque, and documented final clearances.
What should be confirmed before ordering?Confirm the engine family, finished bore, stroke, connecting rod, wrist pin, cylinder head, intended fuel, boost level, and compression target with the engine builder.
Installation Instructions
- Confirm the package label identifies Mahle 197952235 and compare every supplied component with the build sheet.
- Have the block, crankshaft, rods, bores, deck, and cylinder heads measured by a qualified machine shop.
- Clean all components and oil passages according to Mahle and engine-builder procedures.
- Measure piston-to-wall clearance and file each ring for its assigned cylinder and operating conditions.
- Verify pin fit, lock engagement, piston orientation, deck height, valve clearance, balance, and compression ratio.
- Assemble with the specified lubricants, fastener procedures, torque values, and final inspection records.
Engine
Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...
View Engine Products
Mahle
Shop Mahle pistons and piston rings at Black Ops Auto Works for your next engine build. Compare application-specific piston sets, bore sizes and drop-in or file-fit ring configurations. Choose the exact components with your builder using the planned engine combination and measured assembly requirements.Piston Sets for Your Engine CombinationThe listed piston range spans separate GM, Ford, Subaru, BMW, Toyota and other engine applications. Review engine version, bore, stroke, rod length, pin size, compression height and crown details for the exact set. Stated compression-ratio information belongs to the specified combination and should be reviewed with the actual build rather than applied to every engine setup.Drop-In and File-Fit Ring ReferencesCompare ring sets by bore size, individual ring widths and the exact piston’s groove configuration. Choose drop-in or file-fit preparation according to current manufacturer instructions and the builder’s measured requirements. Coordinate cyli...
View Mahle Products