-19%
MBRP S5205AL catback on white background
Click to zoom in

MBRP 2.5-Inch Cat-Back, Street Profile, Quad Rear Exit Exhaust, S5205AL

MBRP
MBRPS5205AL
882963129703
Catback
13 Units In Stock
$ 1,327.93 $ 1,074.99
$ 1,074.99

MBRP S5205AL

Upgrade your 2020-2027 Ford/Lincoln Explorer ST/Platinum/King Ranch/Aviator with the MBRP® 2.5-Inch, Armor Lite, Street Profile, Quad Rear Exit, Cat-Back Exhaust with Stainless Steel Tips. 3-Year Warranty included.

Key Features

  • 2.5-Inch
  • 3-Year Warranty
  • Cat-Back
  • Street Profile
  • Aluminized Steel
  • ARMOR Lite
  • 3.0L EcoBoost Engine Only, ST, Platinum, King Ranch, Lincoln Aviator Trims Only. Excludes Hybrid Models. Excludes Tremor

Fitment

Manufacturer application requirements: 3.0L EcoBoost Engine Only, ST, Platinum, King Ranch, Lincoln Aviator Trims Only. Excludes Hybrid Models. Excludes Tremor

Years Make Model / trim Requirements
2020-2027 Ford Explorer — ST 3.0L EcoBoost Engine Only, ST, Platinum, King Ranch, Lincoln Aviator Trims Only. Excludes Hybrid Models. Excludes Tremor
2020-2027 Ford Explorer — Platinum 3.0L EcoBoost Engine Only, ST, Platinum, King Ranch, Lincoln Aviator Trims Only. Excludes Hybrid Models. Excludes Tremor
2020-2027 Ford Explorer — King Ranch 3.0L EcoBoost Engine Only, ST, Platinum, King Ranch, Lincoln Aviator Trims Only. Excludes Hybrid Models. Excludes Tremor
2020-2027 Lincoln Aviator 3.0L EcoBoost Engine Only, ST, Platinum, King Ranch, Lincoln Aviator Trims Only. Excludes Hybrid Models. Excludes Tremor

Specifications

Manufacturer MBRP
Manufacturer Part Number S5205AL
Part Type Exhaust
Tubing Size 2.5-Inch
Warranty 3-Year Warranty
Inlet Size 2.5-Inch
Outlet Size 2.5-Inch
Type Cat-Back
Profile Street Profile
Material Aluminized Steel
Series ARMOR Lite
Exit Style Quad Rear Exit
Fuel Type Gasoline
Vehicle Configuration 3.0L EcoBoost Engine Only, ST, Platinum, King Ranch, Lincoln Aviator Trims Only. Excludes Hybrid Models. Excludes Tremor

What's Included

  • One complete MBRP S5205AL catback in the exact manufacturer configuration
  • Only application-specific pipes, mufflers, tips, clamps, hangers, and hardware stated or shown for this exact kit are included
  • Unlisted emissions components, adapters, sensors, tools, and unrelated exhaust sections are not included

About MBRP

MBRP develops application-specific performance exhaust systems and precision exhaust components across multiple materials, profiles, and sound levels. Always match the exact product configuration and current manufacturer application data.

Related Parts

  • Use only clamps, adapters, hangers, tips, and replacement sections that match the exact diameter and connection style
  • Confirm any downpipe, mid-pipe, muffler, resonator, or tail section against the same vehicle and exhaust configuration
  • Do not use a related SKU with a different material, finish, size, side, profile, engine, body, or emissions configuration

FAQ

What is the S5205AL?

It is MBRP's exact catback configuration described on this page.

Is this part vehicle specific?

Yes. Fitment is limited to the manufacturer applications and all requirements listed above.

What should be checked before ordering?

Confirm year, make, model, engine, drivetrain, body, wheelbase, original exhaust, emissions equipment, and every stated exclusion.

What material is used?

Aluminized Steel

Are all installation parts included?

Only components explicitly shown or listed for this exact configuration are included. Do not assume unrelated clamps, adapters, gaskets, sensors, or tools are supplied.

Can it be combined with another exhaust system?

Only when every diameter, connection, routing, clearance, material, and application requirement is compatible. Do not substitute a related part number.

Do emissions rules apply?

Yes. Retain every required emissions device and follow current federal, state, and local sale, installation, noise, and use requirements.

What should be checked after installation?

Inspect alignment, body and chassis clearance, joint sealing, hanger position, and clamp torque after the first complete heat cycle.

Installation Instructions

  1. Allow the exhaust to cool completely and support the vehicle at approved lifting points.
  2. Compare the new part with the original connection, routing, dimensions, hangers, clearances, and emissions requirements before removal.
  3. Remove only the components identified by the manufacturer and retain any factory hardware or emissions device specified for reuse.
  4. Test-fit every section and connection before fully tightening clamps or fasteners.
  5. Align the part away from body panels, wiring, hoses, fuel and brake lines, suspension, drivetrain, spare tire, and heat-sensitive components.
  6. Tighten all connections in the manufacturer sequence, start the vehicle, and inspect for leaks or contact.
  7. Recheck alignment and fastener torque after the first complete heat cycle.

California Proposition 65 Warning: This product may expose you to chemicals including nickel and chromium compounds known to the State of California to cause cancer, birth defects, or other reproductive harm. See www.P65Warnings.ca.gov.

MBRP S5205AL manufacturer specifications and installation information

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×