-19%
Click to zoom in
SKU: S5323304 / UPC: 882963134660
MBRP 3-Inch Cat-Back Exhaust System for 2024-2025 Toyota Tacoma Limited 2.4L
The MBRP a precision-engineered 3-inch cat-back exhaust system designed specifically for the 2024-2025 Toyota Tacoma Limited equipped with the 2.4L engine and coil spring suspension. This single side exit setup replaces the restrictive factory exhaust, unlocking up to 44% greater airflow through mandrel-bent tubing that feeds more oxygen to your engine for real gains in horsepower and torque. The result? Quicker acceleration, improved fuel efficiency under load, and a deeper, more resonant exhaust tone that turns heads on the trail or highway louder than stock yet balanced for everyday comfort without drone.
Crafted from heavy-duty T304 stainless steel, the S5323304 withstands rust, corrosion, and extreme weather, making it the durable pick for off-road adventures or daily commutes. Its street profile muffler tunes the sound to a moderate growl under throttle, while the bolt-on design uses factory hanger locations for a straightforward install that takes a few hours with basic tools. Dyno-tested to deliver consistent power across the RPM range, this system outperforms stock configurations by reducing backpressure and enhancing throttle response, giving your Tacoma the edge in towing, hauling, or spirited driving.
Exact Vehicle Fitment
- Year: 2024-2025
- Make: Toyota
- Model: Tacoma Limited
- Engine: 2.4L Turbo (Gasoline)
- Suspension Note: Coil spring suspension only (excludes leaf spring setups like TRD Off-Road or base models)
- Exit Style: Single passenger-side rear exit for clean, OEM-like aesthetics
This part number is confirmed for direct fit on U.S.-spec Tacomas always verify your VIN for suspension type.
What's Included in Your Purchase
The S5323304 kit arrives complete with everything needed for a seamless upgrade:
- 3-inch mandrel-bent T304 stainless steel intermediate pipe
- High-flow street profile muffler for tuned sound and reduced restriction
- Over-axle and tailpipe sections for full cat-back coverage
- Single 5-inch OD dual-wall polished stainless steel angle-cut tip with MBRP logo
- Stainless steel band clamps (quantity: 2-3, depending on connections)
- Rubber hangers and isolators to match OEM mounting points
- Comprehensive installation hardware and instructions
No cutting or welding required everything bolts up using existing factory mounts.
Key Specifications
- Part Number: S5323304
- UPC: 882963134660
- Material: T304 Stainless Steel (rust-resistant and easy to maintain)
- Tubing Diameter: 3 inches (smooth bends for unrestricted flow)
- Tip Details: 5-inch outlet, dual-wall construction, mirror-polished finish
- Sound Profile: Street (aggressive under acceleration, refined at cruise)
- Warranty: Lifetime against defects
- Product Weight: 64 lbs
- Shipping Box Dimensions: 46.5 x 16.5 x 12 inches (compact for easy handling)
Pair this with your Tacoma's turbocharged 2.4L for the responsive power and bold presence it deserves. Order the MBRP S5323304 today and experience the difference a high-flow exhaust makes your truck will thank you with every rev.
Catback
A catback exhaust system replaces everything from the catalytic converter back, covering the mid pipe, muffler, and tailpipe section in one bolt on upgrade. This collection covers catback systems for trucks, Jeeps, muscle cars, imports, and performance SUVs, giving you a straightforward way to improve sound, exhaust flow, and rear end styling without touching the factory catalytic converters or front pipe. Catback systems are available in stainless steel and titanium construction, with dual rear exit, single exit, and quad tip configurations, and a range of sound levels from mild touring tone to aggressive track character. Whether you want a deeper daily driver sound or a full track ready exhaust note, you will find a matched system for your platform here. What This Category Covers This collection includes complete catback exhaust systems, cat-back kits, dual rear exit systems, axle back adjacent catback upgrades, stainless steel and titanium exhaust systems, and street, tourin...
View Catback Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
MBRP
MBRP exhaust systems for trucks, Jeeps, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop MBRP cat-back systems, axle-back systems, filter-back diesel exhaust, exhaust brakes, downpipes, mid-pipes, mufflers, exhaust tips, and universal tubing and clamps for Ford F-150, Ford Ranger and Ranger Raptor, Jeep Wrangler, Jeep Grand Cherokee SRT, Dodge Challenger HEMI, RAM RHO, Toyota 4Runner and Land Cruiser, Chevy Tahoe, Cadillac Escalade, and Corvette platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,059 MBRP SKUs across cat-back, axle-back, filter-back, and diesel exhaust categories. What This Brand Covers MBRP built its reputation in the diesel truck market before expanding into gas trucks, Jeeps, muscle cars, and sports cars. The lineup spans Armor BLK and Armor Pro coated systems, T304 and T409 stainless steel cat-backs, aluminized steel value system...
View MBRP Products