-19%
Click to zoom in
Complete the exhaust path with the correct dimensions and connections
MBRP GP190810 is a steel tubing identified by its exact manufacturer part number. It does not use year-make-model fitment; confirm every listed dimension, connection, material, finish, clearance, and intended exhaust position before ordering.
Key Features
- Exact steel tubing configuration
- T409 Stainless Steel
- 3 inch
- Muffler
- Warranty: N/A Inlet Size : 3-Inch Outlet Size : 2.5-Inch Length : 30.5-Inch Body Diameter : 6-Inch
Fitment
| Application Type | Requirements |
|---|---|
| Universal or dimension based | No year-make-model fitment applies. Match all stated dimensions, connections, clearances, material, finish, and installation position. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer | MBRP |
| Manufacturer Part Number | GP190810 |
| Product Type | Steel Tubing |
| Fitment Scope | Universal or dimension based |
| Tubing or Connection Size | 3 inch |
| Material | T409 Stainless Steel |
| Series | N/A |
| Warranty | N/A Inlet Size : 3-Inch Outlet Size : 2.5-Inch Length : 30.5-Inch Body Diameter : 6-Inch |
| Type | Muffler |
| Condition | New |
| Warranty | N/A Inlet Size : 3-Inch Outlet Size : 2.5-Inch Length : 30.5-Inch Body Diameter : 6-Inch |
What's Included
- One new MBRP steel tubing in the exact configuration shown
- Only the product and attached hardware explicitly shown or stated for this exact part are included
- Mating pipes, adapters, clamps, hangers, gaskets, sensors, and tools are excluded unless specifically identified
About MBRP
MBRP develops application-specific performance exhaust systems and precision exhaust components across multiple materials, profiles, and sound levels. Always match the exact product configuration and current manufacturer application data.
Related Parts
- Use only clamps, adapters, hangers, tips, and replacement sections that match the exact diameter and connection style
- Confirm any downpipe, mid-pipe, muffler, resonator, or tail section against the same vehicle and exhaust configuration
- Do not use a related SKU with a different material, finish, size, side, profile, engine, body, or emissions configuration
FAQ
What is the GP190810?It is MBRP's exact steel tubing configuration described on this page.
Is this part vehicle specific?No. It is selected by dimensions and application requirements rather than year-make-model fitment.
What should be checked before ordering?Confirm diameter, length, inlet and outlet style, material, finish, mounting, clearance, and intended position.
What material is used?T409 Stainless Steel
Are all installation parts included?Only components explicitly shown or listed for this exact configuration are included. Do not assume unrelated clamps, adapters, gaskets, sensors, or tools are supplied.
Can it be combined with another exhaust system?Only when every diameter, connection, routing, clearance, material, and application requirement is compatible. Do not substitute a related part number.
Do emissions rules apply?Yes. Retain every required emissions device and follow current federal, state, and local sale, installation, noise, and use requirements.
What should be checked after installation?Inspect alignment, body and chassis clearance, joint sealing, hanger position, and clamp torque after the first complete heat cycle.
Installation Instructions
- Allow the exhaust to cool completely and support the vehicle at approved lifting points.
- Compare the new part with the original connection, routing, dimensions, hangers, clearances, and emissions requirements before removal.
- Remove only the components identified by the manufacturer and retain any factory hardware or emissions device specified for reuse.
- Test-fit every section and connection before fully tightening clamps or fasteners.
- Align the part away from body panels, wiring, hoses, fuel and brake lines, suspension, drivetrain, spare tire, and heat-sensitive components.
- Tighten all connections in the manufacturer sequence, start the vehicle, and inspect for leaks or contact.
- Recheck alignment and fastener torque after the first complete heat cycle.
California Proposition 65 Warning: This product may expose you to chemicals including nickel and chromium compounds known to the State of California to cause cancer, birth defects, or other reproductive harm. See www.P65Warnings.ca.gov.
Fabrication
Shop automotive fabrication parts, tubing, fittings, hoses, clamps, and welding supplies at Black Ops Auto Works. Find components for custom exhaust routing, intake plumbing, fuel and oil lines, mounting solutions, and heat protection. Compare materials and hardware from Vibrant Performance, Stainless Bros, Ticon Industries, Radium Engineering, Mishimoto, Kooks, and other brands by exact dimensions and intended application. Stainless Steel, Aluminum, and Titanium Tubing Choose tubing, bends, and fabrication sections for your project’s routing and material requirements. This collection includes steel, aluminum, and titanium tubing categories, with selected T304 and SS321 stainless products. Compare outside diameter, wall thickness, straight length, bend angle, and centerline radius before planning cuts and joints. Explore the Stainless Bros collection for additional stainless tubing, mandrel bends, pie cuts, flanges, and exhaust fabrication components. Exhaust Flanges, Clamps, and Sl...
View Fabrication Products
MBRP
MBRP Exhaust by Vehicle and Exact Part NumberShop MBRP exhaust systems and components for cars, trucks, SUVs, Jeeps, and diesel applications. Compare exact vehicle fitment, manufacturer part number, tubing size, material, exit configuration, finish, sound profile, and included components before ordering.MBRP Product Families Cat-back, axle-back, turbo-back, DPF-back, and downpipe-back systems Mufflers, resonators, tips, clamps, adapters, tubing, and fabrication components Aluminized steel, T409 stainless steel, T304 stainless steel, black-coated, burnt-tip, and carbon-fiber configurations Vehicle-specific kits and universal parts selected by exact dimensions How to Choose the Correct MBRP ProductFor a vehicle-specific system, confirm year, make, model, engine, drivetrain, cab, bed, wheelbase, body, factory exhaust, emissions equipment, bumper, and exit layout. For universal parts, match inlet, outlet, length, diameter, material, wall style, finish, mounting, and available clearance....
View MBRP Products
Steel Tubing
Shop fabrication tubing, mandrel bends, elbows and pie cuts for custom exhaust and related piping work. Compare Stainless Bros and Vibrant stainless-steel references by alloy, outside diameter, wall thickness and bend geometry. Plan the fabrication around measured routing and the material specified for the system.Straight Tubing and Mandrel BendsStraight lengths provide material for runs between components, while preformed elbows and bends help route around the chassis. Compare bend angle, centerline radius and leg length; a no-leg elbow and a long-leg bend offer different trimming and joining options.Outside diameter describes the tube’s exterior, while wall thickness affects its inside opening. Match both to the adjoining components and intended joint. Nominal diameter alone does not confirm a slip-fit connection.Stainless Grades and Pie-Cut AssembliesThe selection includes 304 and 321 stainless references, alongside specifically identified aluminized-steel and other material list...
View Steel Tubing Products