Click to zoom in
The Mickey Thompson Classic III Black wheel, material number 250449, uses product code 226100079 and the exact 17x9 in, 8x6.50 in (8x165.1mm) configuration shown. Use every listed dimension and the current Mickey Thompson application notes before ordering.
Key Features
- Classic eight-hole one-piece cast-aluminum wheel design
- Satin-black finish protected by a clear coat
- Smooth outer lip and embossed M/T spoke logo
- 3,250-pound maximum load rating per wheel
- Includes a non-corrosive black screw-on center cap
- Requires 60-degree bulge-acorn cone-seat lug nuts
Fitment
Not compatible with 1986 and earlier Jeep CJ models. Mickey Thompson also does not approve this wheel for 2022-and-newer Toyota Tundra or 2023-and-newer Toyota Sequoia applications.
| Fitment Basis | Required Verification |
|---|---|
| 17x9 in / 8x6.50 in (8x165.1mm) | Backspacing, offset, hub bore, brake clearance, load rating, tire clearance, and lug-seat type |
Specifications
| Brand | Mickey Thompson |
|---|---|
| Series | Classic III Black |
| Manufacturer Part Number | 226100079 |
| Material Number | 250449 |
| Wheel Size | 17x9 in |
| Bolt Pattern | 8x6.50 in (8x165.1mm) |
| Backspacing | 5.0 in |
| Offset | 0 mm |
| Hub Bore | 125.20 mm |
| Maximum Load | 3,250 lb per wheel |
| Approximate Weight | 27 lb |
| Construction | One-piece cast aluminum |
| Finish | Satin black with protective clear coat |
| Condition | New |
| UPC | 787025483116 |
What's Included
One Mickey Thompson Classic III Black wheel and one 250365 black screw-on center cap. Tires, TPMS sensors, lug nuts, mounting, and balancing are not included.
Installation Notes
Use 60-degree bulge-acorn cone-seat lug nuts and follow the vehicle and wheel manufacturer's torque sequence. Verify the wheel seats fully on the hub, clears the brakes and suspension, and remains within the vehicle's load requirements. Recheck lug torque after the initial driving interval specified by the installer.
Related Mickey Thompson Products
- Shop Mickey Thompson tires, wheels, and accessories
- Shop aftermarket wheels
- Mickey Thompson Classic III 17x12 polished 8x6.5 wheel
- Mickey Thompson Classic III 17x9 polished 8x6.5 wheel
Frequently Asked Questions
Will 250449 fit my vehicle?
Fitment is not assigned from bolt pattern alone. Confirm the complete specifications and all current Mickey Thompson notes for the exact vehicle and tire package.
Does this listing include a full set?
No. This listing includes one wheel unless the quantity selector states otherwise.
Which lug nuts are required?
Mickey Thompson specifies 60-degree bulge-acorn cone-seat lug nuts for Classic Series wheels and recommends duplex bulge-acorn lug nuts on vehicles with a GVWR of 6,500 pounds or greater.
Mickey Thompson
Shop Mickey Thompson street, off-road, and competition tires, cast wheels, center caps, racing tubes, and wheel-system accessories by exact size, construction, compound, bolt pattern, offset, load rating, wheel interface, and manufacturer part number. Choosing the Correct Mickey Thompson Product Match the complete tire size, load, speed, construction, and intended use Confirm wheel diameter, width, bolt pattern, offset, center bore, and brake clearance Verify center-cap opening, retention method, and compatible wheel series Use tire and wheel dimensions only with an approved vehicle setup Related Tire and Wheel Collections All Tires Aftermarket Wheels Wheels and Tires Tire and Wheel Accessories Frequently Asked Questions How do I choose the correct Mickey Thompson tire?Match the exact tire size, wheel width, load and speed rating, construction, compound, clearance, inflation requirements, and intended street, off-road, or competition use. Will a Mickey Thompson wheel fit my veh...
View Mickey Thompson Products