-16%
Click to zoom in
Create a protected axle loop for a separate rated ratchet strap
Moroso 80755 wraps around a compatible axle or secure chassis point to provide two flat D-rings for a separate tie-down. The two-inch by 24-inch strap uses a 12-inch Cordura center sleeve for abrasion protection and carries a 3,333-pound load limit.
Key Features
- Two-inch-wide axle-loop strap
- Twenty-four-inch overall length
- Flat D-rings at both ends
- Twelve-inch Cordura center sleeve reduces chafing
- 10,000-pound break strength
- 3,333-pound load limit
- Made in the United States
Fitment
No year-make-model fitment applies. Confirm every dimension, interface, clearance, load, and installation requirement shown below.
| Application Type | Requirements |
|---|---|
| Dimension Based | Universal securement accessory. Confirm a smooth, structurally suitable wrap point, required strap count, anchor and ratchet ratings, clearance from brake lines and moving parts, and the transported load. |
Specifications
| Detail | Value |
|---|---|
| Brand | Moroso |
| Manufacturer Part Number | 80755 |
| Product Type | Cargo Tie-Downs |
| Width | 2 inches |
| Length | 24 inches |
| End Hardware | Flat D-rings |
| Protective Sleeve | 12-inch Cordura center sleeve |
| Break Strength | 10,000 pounds |
| Load Limit | 3,333 pounds |
| Quantity | Single |
What's Included
- One axle strap loop with two D-rings
- Not included: Ratchet strap, trailer anchors, wheel chocks, and additional axle straps
About Moroso
Moroso Performance Products develops racing and performance hardware in Connecticut, including oil-system, engine, electrical-cover, and vehicle-securement components supported by exact part-number documentation.
Related Parts
- Use only Moroso or vehicle components verified for this exact part number and configuration; no unverified internal link was added.
FAQ
What is the 80755?It is a axle tie-down strap made for providing a protected loop for vehicle transport securement.
What does this part fit?Universal securement accessory. Confirm a smooth, structurally suitable wrap point, required strap count, anchor and ratchet ratings, clearance from brake lines and moving parts, and the transported load.
What is included?One axle strap loop with two D-rings
What is it made from?Heavy-duty two-inch webbing is protected by a 12-inch Cordura sleeve and terminated with metal D-rings.
Does it replace every surrounding component?No. Review the excluded items and inspect every mating component before installation.
Is professional installation recommended?Yes when the part affects engine sealing, lubrication, electrical protection, fastener preload, or vehicle securement.
What warranty applies?Use Moroso's current warranty terms and retain proof of purchase.
What should be checked before use?Confirm the exact application or interface, installation security, clearances, and safe operation before service.
Installation Instructions
- Inspect the webbing, sleeve, stitching, and D-rings before every use.
- Choose a smooth rated wrap point that cannot crush brake lines, wiring, hoses, or suspension components.
- Center the protective sleeve against the contact surface and pass the strap around the axle or approved chassis point.
- Join both D-rings to a compatible rated tie-down and tension the complete system without exceeding any component limit.
- Recheck routing and tension after initial travel and replace the strap after damage, chemical exposure, or excessive wear.
California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. www.P65Warnings.ca.gov
Body Armor & Protection
Body armor and protection for trucks and Jeeps is stocked at Black Ops Auto Works. Shop rock sliders, skid plates, fender flares, and underbody protection built for Chevrolet Colorado, RAM 1500 TRX, Toyota Tundra and Tacoma, and Jeep Gladiator. These parts guard the frame, fuel tank, transfer case, and rocker panels from rock strikes, brush, and trail debris. Black Ops Auto Works carries 957 body armor SKUs, all filterable by year, make, model, and trim to confirm correct fitment. What This Category Covers Body armor and protection includes rock sliders, skid plates, differential covers, fender flares, and rocker panel guards designed to shield the underside and lower body of a truck or Jeep during off-road driving. This category ranges from bolt-on rock sliders to full underbody skid plate systems. Rock Sliders and Rock Rails Rock sliders bolt or weld to the frame rails beneath the doors, protecting rocker panels from rock strikes while also serving as a step for entry and exit...
View Body Armor & Protection Products
Cargo Tie-Downs
Shop cargo tie-down straps and rack anchors from Rhino-Rack and Access ADARAC at Black Ops Auto Works. Choose protected cam buckle straps for securing suitable gear, dedicated Vortex crossbar tie-down points, ADARAC channel anchors or Pioneer wrap pads supplied with straps. Match the restraint to your load and the anchor to the rack already on your vehicle. Looking for a rail pair along the top of a pickup bed? Browse our truck bed rails. This collection focuses on the straps and compatible attachment points used to restrain cargo. For equipment clamps and load-positioning uprights, visit Cargo Organization. Compare Cargo Tie-Downs by Part Number Part Contents Choosing the Right Fit RTD35P Black Rapid Straps Two 3.5 m straps Protected cam buckles; select by load and routing RTD45P Red Rapid Straps Two 4.5 m straps Protected cam buckles; extra reach over 3.5 m RTD55P Blue Rapid Straps Two 5.5 m straps Longest Rapid Strap pair in this range S606 Vortex underside tie-down p...
View Cargo Tie-Downs Products
Exterior Parts & Accessories
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products
Moroso
Shop Moroso oiling, cooling, ignition, suspension, electrical, drivetrain, wheel, and racing components by exact manufacturer part number and verified application requirements. Choose Your Part Match the exact manufacturer part number and product function Confirm every year, make, and model record when vehicle fitment is listed Keep engine, trim, chassis, dimensions, and companion-part requirements in the application check Verify quantity, material, ports, threads, mounting, clearance, and intended use Related Performance Collections All Moroso Products Engine Components Cooling Components Suspension Components Frequently Asked Questions Does an engine family alone guarantee a Moroso part will fit? No. Confirm the exact vehicle or system application, dimensions, sump or mounting position, ports, threads, clearance, and required companion parts. Are Moroso products sold as complete installation kits? Only the parts expressly named on the exact product page are supplied. Pickups,...
View Moroso Products