Sold out
Click to zoom in
Restore, repair, or complete the listed Jeep application with this OMIX steering knuckle left. It is identified by manufacturer part number 18007.02 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.
Key Features
- For replacement front hub & bearing assembly, use 16705.14.
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 2007-2016 | Jeep | Wrangler | Steering Knuckle Left. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately. |
Specifications
| Brand | OMIX |
|---|---|
| Manufacturer | OMIX-ADA |
| Manufacturer Part Number | 18007.02 |
| Product Type | Steering Knuckles & Spindles |
| Fitment Type | Vehicle Specific |
| Condition | New |
What's Included
One new OMIX steering knuckles & spindles package identified by manufacturer part number 18007.02. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.
About OMIX
OMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.
Related OMIX Products
- Shop all OMIX Jeep restoration parts
- Omix Steering Knuckle Left- 90-06 MJ/XJ/YJ/ZJ/TJ
- Omix Steering Knuckle Right- 90-06 MJ/XJ/YJ/ZJ/TJ
- Omix Auto Trans Rebuild Kit TF6 87-03 Wrangler
Frequently Asked Questions
How do I confirm OMIX 18007.02 fits my vehicle?
Match the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.
What must be matched before drivetrain installation?
Confirm transmission, axle, spline, ratio, shaft, seal, bearing, clutch, transfer-case, and position details that apply to the exact vehicle.
What should be inspected during drivetrain service?
Inspect mating splines, bearings, seals, lubricant, fasteners, runout, end play, and companion components using the current vehicle service procedure.
Installation Instructions
Follow the current OMIX instructions and vehicle service information for part number 18007.02. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.
OMIX
Shop OMIX replacement and restoration parts by exact manufacturer part number and verified Jeep or Willys application. The catalog covers body, interior, braking, fuel, engine, drivetrain, electrical, lighting, steering, suspension, and service components for selected vehicle generations. Choosing OMIX Parts Match the exact OMIX manufacturer part number Confirm year, make, model, body style, drivetrain, engine, position, and every current application note Check dimensions, threads, splines, connectors, finish, and mounting interfaces Verify gaskets, seals, fluids, wiring, brackets, fasteners, and companion parts required for installation Use the current vehicle service procedure for torque, adjustment, aiming, alignment, and final safety checks Related Jeep Collections Jeep Parts Rugged Ridge Products Drivetrain Parts Suspension Parts Frequently Asked Questions How do I confirm an OMIX part fits my Jeep?Match the exact manufacturer part number and listed year, make, and model, ...
View OMIX Products
Steering Knuckles & Spindles
Steering knuckles and spindles support wheel hubs, ball joints, tie rods and brake components at the front suspension. Shop high-steer knuckles, lift spindles, drop spindles, replacement parts, drag-link hardware and complete spindle lift kits for trucks and Jeeps. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 104 Steering Knuckles & Spindles SKUs with fitment-focused selection and ordering support. What This Steering Knuckles & Spindles Collection Covers The catalog focuses on truck and off-road fitment, including Silverado and Sierra, F-150, Ram, Wrangler, Tacoma, Tundra and Ranger. Products range from RockJock high-steer components to MaxTrac lift and lowering spindle applications. Steering Knuckles for Jeep Builds High-steer knuckles can change steering linkage position and support stronger steering arrangements on Wrangler applications. Match the axle, taper, lift ...
View Steering Knuckles & Spindles Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products