OMP HTE Series Evo Fiberglass Seat - Black

HTE-EVO Profile FIA Bucket Seat Built on a Lightweight Fiberglass Shell

The OMP HTE Series Evo Fiberglass seat brings the proven ergonomics and aggressive bolstering of the HTE-EVO line to drivers who want serious track capability at a more accessible price point. Carrying full FIA 8855-1999 homologation, the OMPHA0-0818-A01-071 features a rigid fiberglass shell engineered to meet the same safety standards as its carbon counterpart, wrapped in OMP's breathable AIRNET lining on side bolsters and high-contact velvet fabric on the central cushion zone. Whether you are setting up a dedicated circuit car or a rally build, this seat delivers the certification and structural performance the rulebook demands.

Key Features

• FIA 8855-1999 homologated for sanctioned competition use
• Fiberglass shell construction offering excellent rigidity at reduced cost
• AIRNET breathable fabric on side bolsters for ventilation during extended stints
• Velvet central cushion fabric for driver comfort and grip
• HANS device compatible harness guide openings
• Multiple harness slot openings for 4-point, 5-point, and 6-point belt systems
• Side mount configuration compatible with OMP Type W brackets
• HTE-EVO shell profile with deep lateral bolstering for secure driver containment
• Complies with major sanctioning body requirements for homologated bucket seating

Specifications

What's Included

• 1x OMP HTE Series Evo Fiberglass Racing Seat (OMPHA0-0818-A01-071)
• Mounting hardware documentation (side brackets sold separately)

Frequently Asked Questions

Yes. The OMPHA0-0818-A01-071 holds full FIA 8855-1999 homologation, making it eligible for use in sanctioned circuit racing, rally, and club motorsport events that require a certified bucket seat.

Both seats share the same HTE-EVO shell profile, ergonomic geometry, and AIRNET/velvet lining. The primary difference is the shell material: the fiberglass version is heavier but more affordable, while the carbon version offers reduced weight for weight-sensitive builds. Homologation is identical on both.

The seat uses OMP's AIRNET breathable mesh fabric on the side bolsters for ventilation and a velvet center panel for contact comfort. This combination manages heat and moisture during extended track use.

Yes. The harness openings are designed for HANS (Head and Neck Support) device compatibility. Many sanctioning bodies require HANS use alongside FIA-certified seating, and this seat accommodates both requirements.

The seat supports 4-point, 5-point, and 6-point harness configurations. Verify harness throat width compatibility with your specific belt system prior to purchase and installation.

The seat uses a side mount Type W configuration. OMP vehicle-specific or universal Type W side mount brackets are required for installation and are sold separately. Confirm bracket fitment for your chassis before ordering.

Yes. The FIA 8855-1999 certification covers a wide range of motorsport disciplines. Verify with your specific series regulations to confirm the homologation is current and valid for your event class.

Both the fiberglass and carbon HTE-EVO versions meet the identical FIA 8855-1999 safety standard. Carbon is lighter, but fiberglass provides the same certified level of impact protection and rigidity required by the homologation standard.

Yes. Side mount brackets are not included with the OMPHA0-0818-A01-071. OMP offers a full range of Type W compatible mounting brackets for specific vehicle models as well as universal options.

Installation Notes

1. Disconnect the vehicle battery and disable any airbag or seat sensor systems before removing the factory seat, following your vehicle service manual.
2. Unbolt the factory seat from the floor rails and carefully disconnect any wiring harnesses, including occupancy sensors.
3. Select OMP Type W side mount brackets compatible with your chassis floor rails and bolt pattern.
4. Mount the brackets to the seat shell using the correct hardware, torquing to OMP specifications.
5. Position the seat assembly on the floor rails, adjust for proper pedal reach and steering wheel distance, then torque all floor fasteners to specification.
6. Route a compatible FIA-certified harness through the seat's harness openings, ensuring proper belt angles for shoulder, lap, and crotch straps per harness manufacturer guidelines.
7. Verify all connections are secure and test seat stability before driving.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.