Power Stop 22-24 Infiniti QX60 Front Z36 Truck & Tow Brake Kit

Z36 Truck and Tow Front Brake Upgrade for 2022-2024 Infiniti QX60 and Nissan Pathfinder

The PowerStop K9206-36 delivers a complete front brake upgrade for the 2022-2024 Infiniti QX60 and 2022-2024 Nissan Pathfinder, replacing the factory pads and rotors with a matched set of cross-drilled and slotted Z36 Truck and Tow rotors and Carbon-Fiber Ceramic brake pads. Built for the demands of loaded three-row SUVs that carry families, tow trailers, and encounter mountain descents, the K9206-36 addresses the thermal and load limitations of OE braking systems that were designed for average use conditions. The 350mm front rotors feature PowerStop's cross-drilled and slotted surface that continuously evacuates heat and brake gases from the pad interface, reducing the risk of fade during sustained braking. Z36 Carbon-Fiber Ceramic pads provide increased thermal capacity and consistent bite under the elevated brake temperatures generated during towing and hauling, without the noise and wheel dust associated with semi-metallic alternatives. The K9206-36 kit includes all stainless steel hardware for a direct, bolt-on installation with no cutting or modifications required.

Key Features

• PowerStop K9206-36 front Z36 Truck and Tow brake kit for 2022-2024 Infiniti QX60 Autograph, Luxe, Pure, and Sensory and 2022-2024 Nissan Pathfinder S, SV, SL, Platinum, and Rock Creek
• Carbon-Fiber Ceramic Z36 pad compound engineered for SUVs that tow, haul, and carry maximum payload
• Cross-drilled and slotted 350mm front rotors dissipate heat and evacuate gases at the pad interface for consistent fade-free stopping
• Low-dust formulation keeps front wheels cleaner than semi-metallic brake pads
• Quieter operation compared to OE semi-metallic pads with no break-in squeal when properly bedded
• Complete bolt-on kit with premium stainless steel hardware included
• Direct OE-replacement dimensions for a hassle-free installation
• Suitable for towing, daily driving, and mountain passes

Fitment

Specifications

What's Included

• 2x cross-drilled and slotted front brake rotors
• 1 set Carbon-Fiber Ceramic Z36 front brake pads
• Premium stainless steel hardware kit

Frequently Asked Questions

The K9206-36 includes two cross-drilled and slotted front brake rotors and one set of Carbon-Fiber Ceramic Z36 brake pads with all premium stainless steel installation hardware. No calipers are included, so the OE calipers remain in service.

Yes. The K9206-36 fits the 2022-2024 Infiniti QX60 in all trims including the Autograph, Luxe, Pure, and Sensory. It also fits the 2022-2024 Nissan Pathfinder in all trims including S, SV, SL, Platinum, and the 2023-2024 Rock Creek edition, as all of these share the same front brake specification.

Yes. The K9206-36 is specifically designed for vehicles that tow, carry maximum payloads, or encounter extended mountain descents. The Z36 Carbon-Fiber Ceramic compound handles the higher brake temperatures generated under towing conditions, and the cross-drilled and slotted rotors help dissipate heat more rapidly than smooth OE-style rotors.

The Z36 Truck and Tow upgrade uses Carbon-Fiber Ceramic pads formulated for higher thermal loads and heavy-duty use. The standard PowerStop kit (non-Z36) uses their Evolution Sport compound, which is appropriate for daily driving without towing or heavy hauling. If your QX60 or Pathfinder regularly carries seven passengers, tows, or navigates mountain terrain, the K9206-36 Z36 is the stronger choice.

No. The Z36 Carbon-Fiber Ceramic compound is formulated for quiet operation during daily driving. Performing the recommended PowerStop break-in procedure after installation is important to seat the pads evenly across the rotor faces, which eliminates initial squeal and establishes consistent friction characteristics.

If you are only replacing pads and rotors and not opening the hydraulic system, a full brake bleed is not required. You will compress the caliper pistons back into the caliper bore to make room for the new thicker pads, which pushes fluid back into the reservoir. Check the fluid level and condition in the reservoir before starting the job, and top off as needed after completing the installation.

Yes. The 2023-2024 Nissan Pathfinder Rock Creek uses the same front brake specification as the standard Pathfinder lineup and is fully covered by the K9206-36 fitment.

Under normal daily driving conditions, Z36 Carbon-Fiber Ceramic pads typically last between 30,000 and 50,000 miles depending on driving style and load. Rotor service life depends on usage frequency, load, and whether proper bed-in was performed. Inspect rotor thickness at every brake service and replace when thickness approaches the manufacturer minimum specification.

Installation Instructions

1. Safely raise the vehicle and support on jack stands. Remove the front wheels.
2. Remove the brake caliper from the mounting bracket. Support the caliper to avoid hanging by the brake hose.
3. Remove the old front rotors from the hub assembly.
4. Clean the hub face with a wire brush or scotch-brite pad to remove rust and debris. Apply anti-seize to the hub surface if desired.
5. Install the new K9206-36 cross-drilled and slotted rotors onto the hub.
6. Compress the caliper pistons back into the caliper bore using a caliper piston tool. Monitor the brake fluid reservoir level during this step.
7. Install the new Z36 Carbon-Fiber Ceramic pads into the caliper bracket using the included stainless steel hardware.
8. Reinstall the caliper over the new rotor and torque all caliper mounting bolts to specification.
9. Reinstall the wheels and torque lug nuts to the vehicle manufacturer specification.
10. Lower the vehicle, pump the brake pedal until it becomes firm, and perform the PowerStop recommended break-in cycle before returning to normal driving.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.