Power Stop 96-02 Toyota RAV4 Rear Autospecialty Drum Kit

Complete Rear Drum Brake Restoration for the 1996-2002 Toyota RAV4

The PowerStop KOE15297DK is a 1-Click Daily Driver rear drum and shoe kit engineered for the 1996-2002 Toyota RAV4. PowerStop bundles OE-matched rear drums and ceramic-blended brake shoes in a single kit, eliminating the need to source components separately for a full rear drum service. The KOE15297DK is a direct bolt-on replacement that restores factory rear braking performance on the first-generation RAV4 platform.

Why the 1-Click Daily Driver System Works for the RAV4

The first-generation Toyota RAV4 uses a rear drum brake system that requires matched drum and shoe replacement for consistent braking and even wear. The KOE15297DK pairs OE-specification rear drums with PowerStop's ceramic-blended brake shoes. OE-dimension drums maintain factory rotor geometry for proper shoe contact across the full braking surface. The ceramic-blended shoes provide reduced dust and noise compared to standard organic compounds while delivering consistent stopping power throughout the operating temperature range. All installation hardware is included in the KOE15297DK for a self-contained drum brake service.

Key Features

• Complete 1-Click rear drum brake kit includes OE-specification rear drums and ceramic-blended brake shoes
• Direct bolt-on fitment for the 1996-2002 Toyota RAV4 rear drum brake system
• OE-matched drum dimensions ensure proper shoe-to-drum contact and consistent stopping
• Ceramic-blended brake shoes deliver reduced dust and noise versus standard organic compounds
• All installation hardware included for a complete rear drum brake service in one box
• PowerStop Daily Driver line is optimized for commuting, city driving, and highway reliability
• Part number KOE15297DK engineered specifically for the 1996-2002 Toyota RAV4 rear drum platform

Fitment

Specifications

What's Included

• 2x OE-specification rear brake drums
• 1x set ceramic-blended rear brake shoes
• Complete installation hardware kit

About PowerStop

PowerStop is built on the belief that every driver deserves reliable, easy-to-install brakes without overpaying. The Daily Driver line delivers OE-matched stopping performance for everyday vehicles, engineered for commuters and weekend drivers who need confident braking without the complexity of performance upgrades.

Frequently Asked Questions

The KOE15297DK fits the 1996-2002 Toyota RAV4 with rear drum brakes. Confirm your model year and verify rear drum fitment before ordering, as some RAV4 configurations may differ.

Yes. The KOE15297DK is a complete kit including two rear brake drums and a full set of rear brake shoes. All installation hardware is also included. No separate component sourcing is needed.

The KOE15297DK includes PowerStop ceramic-blended brake shoes. These produce less dust and noise than standard organic shoes and provide consistent friction performance across the operating temperature range for daily driving.

Common signs include a soft or spongy brake pedal, pulling to one side under braking, grinding or scraping noises from the rear, or increased stopping distances. Drums should also be replaced when worn past the manufacturer's minimum thickness specification, typically stamped on the drum itself.

Yes. The KOE15297DK is dimensioned to OE specifications for the 1996-2002 Toyota RAV4 rear drum brake system. No modifications to the backing plate, wheel cylinder, or hardware are required.

Yes. After installation, drive at low speeds and apply moderate brake pressure several times to allow the new shoes to conform to the drum surface. Avoid hard stops for the first 50 to 100 miles to ensure proper break-in and even contact.

Yes. PowerStop backs the Daily Driver brake kits with a limited warranty on materials and workmanship. Contact PowerStop or your point of purchase for warranty claim procedures.

Yes. Drum brake replacement requires basic hand tools, jack stands, and brake cleaner. Carefully document the spring and hardware positions before disassembly or photograph both sides for reference. Follow factory torque specifications and bleed the wheel cylinders if disturbed during installation.

Installation Instructions

1. Safely raise the vehicle on jack stands and remove the rear wheels.
2. Remove the brake drum. If stuck, use the drum puller holes or a rubber mallet to free it from the hub.
3. Photograph the brake shoe, spring, and hardware layout before disassembly for reference during reassembly.
4. Remove the brake shoe return springs, hold-down springs, and retainers using brake spring pliers.
5. Remove the old brake shoes and all worn hardware.
6. Clean the backing plate with brake cleaner and inspect the wheel cylinder for leaks before installing new components.
7. Install the new brake shoes and all new hardware from the KOE15297DK kit, following your reference photos.
8. Adjust the brake shoes to the correct drum clearance using the adjuster wheel.
9. Install the new OE-specification rear brake drum onto the hub.
10. Reinstall the wheel and torque to factory specification.
11. Pump the brake pedal until firm before moving the vehicle.
12. Perform a low-speed break-in procedure before normal driving.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.