Size Chart
×
The Pure Drivetrain Solutions 21-458-1000 SUPER-FLEX billet flexplate is engineered for BMW B48, B58, and S58 platforms that see track time, tuning, or high torque converter stall demands. Machined from hand selected aerospace grade alloy steel and hard machined to .002 TIR, the 21-458-1000 replaces the factory stamped steel flexplate with a one piece design rated well beyond OE limits. Every 21-458-1000 flexplate goes through a proprietary three stage heat treating process before being spin tested to 20,000 RPM, exceeding SFI safety standard 29.2. Enthusiasts running upgraded torque converters, higher stall speeds, or built engines choose the 21-458-1000 because it resists the flexing and cracking that leads to premature failure in factory plates.
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2016-2019 | BMW | 340i | B58 |
| 2016-2019 | BMW | 440i | B58 |
| 2019-2025 | BMW | M340i | B58 |
| 2021-2025 | BMW | M440i | B58 |
| 2016-2021 | BMW | M240i | B58 |
| 2017-2023 | BMW | 540i | B58 |
| 2019-2026 | BMW | Z4 | M40i B58 |
| 2019-2020 | Toyota | Supra | B58 |
| 2018-2024 | BMW | 330i | B48 |
| 2017-2024 | BMW | 430i | B48 |
| 2021-2025 | BMW | M3 | S58 |
| 2021-2025 | BMW | M4 | S58 |
| 2023-2025 | BMW | M2 | S58 |
| Detail | Value |
|---|---|
| MPN | 21-458-1000 |
| UPC | Not Provided |
| Material | Aerospace grade alloy steel |
| Finish | Matte black, laser etched logo |
| Design | One piece with integral ring gear |
| TIR Tolerance | .002 inch |
| Tested Speed Rating | 20,000 RPM |
| Safety Standard | Exceeds SFI 29.2 |
| Country of Origin | USA |
Pure Drivetrain Solutions designs and manufactures billet drivetrain components for enthusiasts who demand reliability under extreme power. Every part, including the 21-458-1000, is built in the USA to exacting tolerances and tested well beyond published industry safety standards before it reaches the customer.
The 21-458-1000 is a billet steel flexplate built by Pure Drivetrain Solutions for BMW B48, B58, and S58 engine platforms. It replaces the factory flexplate with a stronger one piece design rated for high stall torque converters and tuned applications.
Which BMW engines use the 21-458-1000?The 21-458-1000 fits vehicles equipped with the B48 four cylinder, B58 inline six, and S58 inline six engines found across 3, 4, 5 Series, Z4, M2, M3, and M4 models.
Does the 21-458-1000 fit the Toyota Supra?Yes, the 21-458-1000 fits the 2019-2020 Toyota Supra equipped with the B58 engine shared with BMW platforms.
Is the 21-458-1000 SFI rated?The 21-458-1000 is tested to 20,000 RPM, which exceeds SFI safety standard 29.2 for flexplates.
What material is the 21-458-1000 made from?The 21-458-1000 is machined from hand selected aerospace grade alloy steel sourced from USA steel mills and finished with a three stage heat treating process.
Will the 21-458-1000 work with a stock torque converter?Yes, the 21-458-1000 retains the factory bolt pattern layout and works with stock or upgraded torque converters.
Does the 21-458-1000 include installation hardware?The 21-458-1000 ships as the flexplate only. Use OE spec or ARP bolts torqued to manufacturer specification during installation.
Why upgrade to the 21-458-1000 instead of running the factory flexplate?The factory stamped flexplate can flex or crack under high stall torque converters and tuned power levels. The 21-458-1000 one piece billet design eliminates this failure point for track and high performance street use.
Drivetrain parts for high-horsepower Mopar, truck, Jeep, and import platforms are stocked at Black Ops Auto Works. Shop differentials, axles, driveshafts, clutch kits, flywheels, flexplates, shifters, transmission components, ring and pinion gears, differential braces, and driveline hardware for Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and turbocharged import platforms. Every drivetrain part is filterable by vehicle platform, drivetrain layout, transmission type, and power level so the correct part ships the first time. Black Ops Auto Works carries 4,765 drivetrain SKUs across differentials, axles, clutches, and transmission hardware. What This Category Covers The drivetrain transfers power from the engine to the wheels and includes the transmission, clutch, driveshafts, axles, differentials, ring and pinion gears, wheel hubs, wheel bearings, U-joints, shifters, mounts, and bushings. Upgrading these components improves power delivery, durability, and reliability under incr...
View Drivetrain Products
Flex discs, also called guibo couplings, are the rubber-reinforced fabric driveshaft couplings used on rear-wheel-drive and all-wheel-drive vehicles with transaxle layouts to connect the driveshaft or propeller shaft to the transmission output flange, absorbing torsional vibration and minor angular misalignment between the gearbox and driveshaft while transmitting full drivetrain torque without the vibration penalty of rigid shaft coupling. These components are particularly common on BMW, Mercedes-Benz, Volvo, Porsche, and other European rear-wheel-drive platforms where the guibo design has been standard for decades, and worn flex discs are one of the most frequently overlooked causes of drivetrain vibration, clunking on throttle application, and accelerated universal joint wear on vehicles where the flex disc has hardened or cracked from age. Replacement with a quality rubber flex disc restores smooth power delivery and protects the driveshaft's universal joints from the shock load...
View Flex Discs Products
Flexplates are the thin stamped steel or billet aluminum rings that connect an automatic transmission-equipped engine's crankshaft to the torque converter, serving the dual function of providing the ring gear teeth that the starter motor engages for engine cranking and creating the flexible coupling between the rigid crankshaft flange and the torque converter's fluid-driven impeller housing. Unlike the flywheel used with manual transmissions, a flexplate is intentionally designed to flex slightly to absorb minor dimensional misalignment between the crankshaft centerline and the torque converter mounting face, preventing stress concentration at the crankshaft flange. High-performance SFI-certified flexplates are required by NHRA and IHRA for automatic transmission-equipped competition vehicles where the rotating assembly mass and launch forces exceed the safe limits of stock stamped steel flexplates. This collection covers replacement and performance flexplates for domestic and impor...
View Flexplates Products
Pure Drivetrain Solutions (PDS) parts and accessories Pure Drivetrain Solutions parts and drivetrain upgrades for Mustang, Camaro, Corvette, Challenger, Charger, Silverado and F-150 builds are stocked at Black Ops Auto Works. Shop twin disc clutch kits, TREMEC transmissions, 8HP and 10R transmission parts, torque converters, flexplates, pans, valve bodies, driveshafts and drivetrain packages. PDS supports power-focused manual and automatic drivetrain builds with vehicle specific components for modern Ford, Chevrolet, Dodge and select BMW applications. This collection includes 176 PDS SKUs across transmission, clutch, torque converter, flexplate and driveline categories. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. What Pure Drivetrain Solutions Covers PDS supplies the parts that transfer engine output through the transmission and into the driveline. The catalog includes parts for 8HP, Ford 10R80 and 10R10...
View Pure Drivetrain Solutions (PDS) Products
Transmission and drivetrain hardware for manual and automatic platforms are stocked at Black Ops Auto Works. Shop flywheels, flexplates, transmission crossmembers, mounts, coolers, valve bodies, shifters, shifter bushings, release bearings, slave cylinders, U-joints, and transmission rebuild kits for Subaru WRX and STI, Dodge Cummins diesel, GM G-Body and F-Body, BMW B58 and S58, Nissan 350Z, and Toyota GR Corolla platforms. Every part is filterable by year, make, model, and transmission type so builders can confirm the correct fitment before ordering. Black Ops Auto Works carries 1,322 transmission and drivetrain SKUs. What This Category Covers This collection spans the hardware that connects the engine to the drivetrain and manages gear selection, including flywheels, flexplates, transmission crossmembers, bell housings, transmission mounts, pans, coolers, filters, valve bodies, transmission internals, shifters, shifter bushings and cables, release bearings, slave cylinders, U...
View Transmissions Products