Click to zoom in
Bolt-On Wishbone System for a Controlled, Confirmed Fit
The Ridetech 11397199 is a bolt-on wishbone system for the vehicle applications listed below. Lowers ride height approx. 4-5" (additional 3" with air). This part number is for the stock 7.5" ring-gear rear end (8.5" ring gear is a separate SKU).
Key Features
- Ridetech part number 11397199
- Rear bolt-on Wishbone (3-link) suspension system, 7.5" ring gear
- This part number is for the stock 7.5" ring-gear rear end (8.5" ring gear is a separate SKU)
- Does not fit S10/S15 Blazer
- Coil-overs or ShockWaves sold separately
Fitment
| Vehicle Application | Position |
|---|---|
| 1982-2003 Chevrolet S10 / GMC S15 / Sonoma 2WD pickup | Rear |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 11397199 |
| Brand | Ridetech |
| Condition | New |
| Shipping Weight | n.a. |
| Specification | Lowers ride height approx. 4-5" (additional 3" with air) |
| Specification | 50% anti-squat, eliminates spring wrap |
| Specification | R-Joint rod ends |
| Specification | Includes lower bars, wishbone, brackets, crossmembers, hardware |
What's Included
- 1 Rear bolt-on Wishbone (3-link) suspension system, 7.5" ring gear
Related Parts
About Ridetech
Ridetech 11397199 is manufactured in the USA. Specifications and fitment above apply to Ridetech 11397199. Sold under Ridetech part number 11397199. Ridetech engineers air suspension, coilovers, and chassis components in the USA and tests every system on real vehicles before it ships. The lineup covers bolt-on street and pro-touring suspension for classic muscle cars, trucks, and modern performance vehicles.
FAQ
Will this fit my vehicle exactly as listed
Check the fitment table above for the exact years, make, and model this part covers. Some model years use different rotor or trim configurations, so confirm your specific submodel before ordering if one is noted.
What is included in the box
This listing includes the component itself. Mounting hardware is included only when stated in the specifications table above.
Do I need any special tools to install this
Basic hand tools are typically sufficient for installation. A torque wrench is recommended to bring fasteners to the manufacturer's specified torque.
Is this a direct replacement for the factory part
Yes, this part is designed as a direct fit replacement for the listed applications using the factory mounting points, so no vehicle modification is required.
What is the expected break-in or service period
Standard break-in and service intervals apply. Follow the installation instructions below for the recommended break-in procedure to reach full performance.
Can I install this myself or do I need a professional
Many owners install this part themselves with common tools and a lift or jack stands. If you are not comfortable with brake or suspension work, a certified technician is recommended.
Does this come with a warranty
This part is covered by the manufacturer's standard warranty against defects in materials and workmanship. Retain your receipt as proof of purchase.
Will this work with my aftermarket wheels
Most stock-diameter aftermarket wheels clear this part without issue. If you run very low-offset or small-diameter wheels, verify clearance before ordering.
Installation Instructions
- Raise the vehicle and support it on jack stands
- Remove the wheel to access the component
- Remove the factory component being replaced
- Install the new Ridetech component using the included hardware
- Torque all fasteners to the manufacturer's specification
- Repeat on the opposite side if applicable
- Verify clearance through full suspension travel before driving
Ridetech
Ridetech parts and accessories for Mustang, Camaro, Chevelle, Nova, C10, Silverado, F-100 and classic muscle builds are stocked at Black Ops Auto Works. Shop AirBar air suspension, StreetGRIP systems, TQ Series coilovers, ShockWave air springs, HQ shocks, StrongArms, MuscleBars, control arms, sway bars, axle flip kits and lowering systems for street builds, tow rigs, restorations and track-focused projects. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 166 Ridetech SKUs across air ride, coilovers, shocks, control arms and sway bars. Air Ride Systems for Classic Cars and Trucks AirBar and ShockWave kits Ridetech air suspension replaces the compromise between a low stance and a usable ride with vehicle-specific brackets, air springs, shocks and hardware. AirBar and ShockWave systems support classic Mustang, Camaro, Chevelle, Impala, C10 and F-100 projects that need adjustable hei...
View Ridetech Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products
Suspension Packages
Complete suspension packages for street, track, truck, SUV, and off-road builds are stocked at Black Ops Auto Works. Shop matched coilover packages, sport lowering kits, lift and leveling systems, shock packages, handling kits, control arm packages, and staged suspension upgrades for cars, trucks, Jeeps, SUVs, and performance vehicles. Every product is filterable by year, make, model, trim, drivetrain, and suspension configuration. This collection spans Mustang, Camaro, Corvette, GM truck, Ford truck, Jeep, Toyota truck and SUV, European sport compact, and domestic performance applications. What This Suspension Packages Collection Covers Matched component systems Suspension packages pair components engineered to work together, which simplifies planning and reduces the risk of mixing incompatible parts. They can include coilovers or shocks, springs, control arms, sway bars, endlinks, alignment parts, and lift hardware. Street and Sport Lowering Packages Balanced handling and ride...
View Suspension Packages Products