Click to zoom in
Gain routing length for lifted or one-ton-axle JK brake systems
RockJock CE-9807FBLKL is built for Custom front or rear installation on 2007-2018 Jeep Wrangler JK two-door and Unlimited four-door models. Each hose is 35 inches long with one bulkhead-fitting groove. Routing, fittings, articulation, tire clearance, and brake-system compatibility must be verified; this is not the standard bolt-on front or rear kit. Final compatibility depends on matching every dimension, mounting point, moving component, and clearance in the intended suspension system.
Key Features
- CE-9807FBLKL includes two DOT-quality stainless-braided hoses
- Thirty-five-inch length supports custom front or rear routing
- Single-groove bulkhead fittings
- New tabs, clips, and copper sealing washers included
- Zinc-plated fittings and mounting hardware
Fitment
| Fitment Type | Verified Application | Required Checks |
|---|---|---|
| Dimension and system specific | Custom front or rear installation on 2007-2018 Jeep Wrangler JK two-door and Unlimited four-door models. Each hose is 35 inches long with one bulkhead-fitting groove. Routing, fittings, articulation, tire clearance, and brake-system compatibility must be verified; this is not the standard bolt-on front or rear kit. | Confirm exact dimensions, mounting hardware, geometry, loads, articulation, component condition, and full suspension and steering clearance |
Specifications
| Detail | Value |
|---|---|
| Product Type | Brake Hose Kits |
| Manufacturer Part Number | CE-9807FBLKL |
| Vehicle | 2007-2018 Jeep Wrangler JK |
| Position | Custom front or rear |
| Length | 35 inches each |
| Construction | Stainless braided |
| Bulkhead Grooves | One |
| Quantity | Two hoses |
What's Included
- Two CE-9807FBLKL extended brake hoses
- Two bulkhead tabs
- Two bulkhead clips
- Four copper washers
About RockJock
RockJock develops connected Antirock sway bar systems, serviceable Johnny Joints, steering components, and suspension hardware for trail control and articulation. Its replacement and universal components are specified by exact dimensions so builders can preserve safe geometry and serviceability.
Related Parts
- RockJock CE-9807FBLK bolt-on JK front hoses
- RockJock CE-9807RBLK bolt-on JK rear hoses
- Application-specific brake hose retaining hardware
FAQ
What is the CE-9807FBLKL?It is the RockJock brake hose kits described in the Specifications table for the stated dimension-based application.
Is this the standard bolt-on JK front kit?No. It is a 35-inch custom-route hose kit; RockJock uses separate part numbers for its standard bolt-on front and rear kits.
Can the hoses be used at the rear?Yes. RockJock permits front or rear custom installation when every fitting and routing requirement is met.
How long is each hose?Each stainless-braided hose is 35 inches long.
Are the hoses DOT quality?Yes. RockJock describes them as OEM-quality DOT brake hoses.
Do both hoses have one bulkhead groove?Yes. The exact configuration uses a single-groove bulkhead fitting.
Must the brake system be bled?Yes. Opening the hydraulic system requires proper bleeding and leak inspection.
Who should install the kit?A qualified technician should perform the work when the installer lacks brake-line tools or bleeding experience.
Installation Instructions
- Verify the package label and manufacturer part number CE-9807FBLKL before removing, cutting, or installing components.
- Confirm the vehicle and design the complete hose route at full steering lock, compression, and droop.
- Verify fitting type, mounting tabs, hose length, and protection from tires, springs, exhaust, and sharp edges.
- Support the vehicle, clean the work area, and remove the factory hoses using line wrenches.
- Install the 35-inch hoses with the supplied tabs, clips, and new copper washers.
- Secure routing without twists, kinks, tension, or abrasion through full travel.
- Bleed the brake system with the correct fluid and inspect every connection under pressure.
- Recheck clearance, leaks, pedal feel, and fastener security before road use and after the first service interval.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
RockJock
Shop RockJock suspension and steering components for your next chassis project at Black Ops Auto Works. Explore Antirock sway-bar kits, Johnny Joint control arms and rod ends, Currectlync steering references and service hardware. Choose the system or component around your vehicle and installation plan.Antirock Sway Bars and LinksCompare application-specific kits with universal bars, arms, end links and mounting tabs. Bar length, spline count, arm configuration and link dimensions work together in the installation. Select complete kit coverage or match each service component to the existing Antirock system rather than treating every bushing or arm as universal.Johnny Joint Arms, Rod Ends and Rebuild PartsThe selection includes adjustable control arms, forged or weld-on rod ends and rebuild components. Compare body size, mounting width, bolt bore and threaded-shank specifications, including right- or left-hand thread. Match rebuild packs and assembly tools to the exact joint being ser...
View RockJock Products