Click to zoom in
This RockJock Currectlync Boot Steering and Modular Extreme Duty Drag Links Articulating is identified by manufacturer part number JK-9703DLB. Confirm the vehicle or mating RockJock system, axle or mounting position, dimensions, thread or joint interface, and included quantity before ordering.
Key Features
- This boot will also fit onto any of our Replaceable Cartridge Rod Ends, but again, is only intended for use on the drag link
- This flexible, articulating boot will move and travel as your suspension articulates off-road, all the while retaining the grease in your rod ends
- Exact-part-number steering knuckles & spindles for the stated vehicle or RockJock system
- Confirm the manufacturer part number, dimensions, mounting position, joint or hardware interface, and included quantity before ordering
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2020-2025 | Jeep | Gladiator | All supported models |
| 2007-2026 | Jeep | Wrangler | All supported models |
| 2007-2022 | Jeep | Wrangler | Unlimited |
Specifications
| Brand | RockJock |
|---|---|
| Manufacturer Part Number | JK-9703DLB |
| Product Type | Steering Knuckles & Spindles |
| Fitment Type | Vehicle Specific |
| Condition | New |
What's Included
One new RockJock steering knuckles & spindles in the quantity and configuration stated for manufacturer part number JK-9703DLB. Companion suspension, steering, axle, hardware, tools, and accessories are included only when expressly listed.
Brand Information
RockJock 4x4 by John Currie develops suspension, steering, axle, joint, sway-bar, and service components for Jeep, Ford Bronco, and custom off-road applications. Selection and installation must follow the exact part number, vehicle or mating system, dimensions, mounting position, adjustment range, and current manufacturer instructions.
Related RockJock Products
- Shop all RockJock products
- RockJock / Currectlync Steering System Bolt-On w 1 1/4in Dia. Tie Rod/Forged Drag Link
- RockJock // Currectlync Boot for Steering Fits all 4 Points w Boot and Zip Tie
- RockJock Currectlync Drag Link Drag Link Rod Only w One End For Use w CE-9701 Kit
Frequently Asked Questions
Will this RockJock steering knuckles & spindles fit a different vehicle?
Only the applications shown in the fitment table are supported. Match the exact year, make, model, body style when required, axle or mounting position, factory equipment, and every current manufacturer note before ordering.
What is included with RockJock JK-9703DLB?
The listing includes the exact new component, pair, or kit stated for this manufacturer part number. Companion arms, joints, springs, brackets, steering parts, hardware, tools, and accessories are included only when expressly listed.
What should be checked during installation?
Verify every mounting point, joint orientation, thread engagement, axle position, steering and brake-line clearance, fastener grade, torque value, and alignment requirement. Recheck adjustment and fastener torque after initial use.
Installation Instructions
Follow the current RockJock instructions for manufacturer part number JK-9703DLB. Support the vehicle safely, test-fit every component, verify orientation and clearances, use the specified hardware and torque values, complete alignment or calibration when required, and inspect every fastener and adjustment after initial use.
Steering Knuckles & Spindles
Steering knuckles and spindles support wheel hubs, ball joints, tie rods and brake components at the front suspension. Shop high-steer knuckles, lift spindles, drop spindles, replacement parts, drag-link hardware and complete spindle lift kits for trucks and Jeeps. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 104 Steering Knuckles & Spindles SKUs with fitment-focused selection and ordering support. What This Steering Knuckles & Spindles Collection Covers The catalog focuses on truck and off-road fitment, including Silverado and Sierra, F-150, Ram, Wrangler, Tacoma, Tundra and Ranger. Products range from RockJock high-steer components to MaxTrac lift and lowering spindle applications. Steering Knuckles for Jeep Builds High-steer knuckles can change steering linkage position and support stronger steering arrangements on Wrangler applications. Match the axle, taper, lift ...
View Steering Knuckles & Spindles Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products