Skyjacker 00-05 Ford Excursion ADX 2.0 Dual Stabilizer Kit w/ CNC Machined Polished Alum.

Skyjacker 00–05 Ford Excursion ADX 2.0 Dual Steering Stabilizer Kit with CNC Machined Polished Aluminum

The Skyjacker ADX 2.0 Dual Steering Stabilizer Kit addresses the common steering instability in 2000–2005 Ford Excursion models equipped with larger tires or lift kits by incorporating two precision-valved dampers that absorb road vibrations and reduce bump steer during highway cruising or off-road traversal.

Each stabilizer features a CNC-machined 6061-T6 polished aluminum hard-anodized cylinder body with a 30mm bore and 14mm piston rod for balanced compression and extension damping that maintains tire contact and sharpens directional control without the harsh rebound of basic single units. Mounted in a dual configuration with a heavy-duty black powder-coated steel bracket, the kit eliminates death wobble and driver fatigue associated with 33-inch-plus tires, supporting towing capacities up to 11,000 lbs while preserving OEM ride quality. 

For Excursion owners upgrading to aggressive off-road setups or simply combating worn stock components, this ADX 2.0 kit delivers the complete steering reinforcement required for confident handling in diverse conditions from daily commutes to rugged trails.

Key Features

• CNC Machined Aluminum Body: 6061-T6 polished hard-anodized cylinder resists corrosion and heat up to 300°F.
• 30mm Bore and 14mm Piston Rod: Provides equal damping in compression and extension for smooth response.
• Dual Stabilizer Setup: Two units with specific valving reduce shimmy and kickback from uneven terrain.
• Heavy-Duty Mounting Bracket: Black powder-coated steel frame ensures secure installation without flex.
• High-Pressure Nitrogen Charge: Prevents fade during extended use and maintains consistent performance.
• Rebuildable Design: Serviceable seals and components extend service life beyond basic stabilizers.

Product Notes

• Recommended for vehicles with 2-inch-plus lifts or 33-inch tires improves stability on stock setups too.
• Compatible with diesel and gas engines no modifications needed for factory steering geometry.
• Inspect bushings annually replace if worn to maintain damping efficiency.
• California Proposition 65: Contains chemicals known to the State of California to cause cancer or reproductive harm.

Warranty: Limited lifetime against manufacturing defects for original purchaser.

Installation Notes

• Basic tools required: sockets, wrenches, and torque wrench (torque to 45-50 ft-lbs per spec).
• Remove stock stabilizer if present; mount bracket to frame and axles, then attach stabilizers.
• Align rods vertically; adjust for clearance from tie rods and ensure full droop travel.
• Professional installation advised for lifted vehicles; total time 1-2 hours.

This Part Fits

Note: Fits front steering applications on 4WD models with standard or lifted suspensions up to 6 inches.

What's Included in the Purchase

• (2) ADX 2.0 Steering Stabilizers (CNC Machined Polished Aluminum, 30mm Bore)
• Heavy-Duty Black Powder-Coated Steel Mounting Bracket
• Hardware Kit (Grade 8 Bolts, Nuts, Lock Washers, Bushings)
• Detailed Installation Instructions with Torque Specs
• Part Number: Skyjacker 2299

Total Package Weight: 12 lbs | Shipping Dimensions: 24" L x 8" W x 4" H (boxed for standard ground shipment)

Why Choose Skyjacker?

• Over 40 years of suspension expertise, engineering components for Ford Super Duty platforms.
• U.S.-made with premium materials tested for off-road and towing demands.
• Comprehensive warranty and technical support for long-term vehicle performance.

Frequently Asked Questions

• Q: Does this kit fit my 2004 Excursion 6.0L Diesel with 35-inch tires?
  A: Yes, designed for diesel models and larger tires provides essential damping for stability.
• Q: Is installation bolt-on without drilling?
  A: Yes, uses existing frame and axle holes no modifications required on stock setups.
• Q: How does it compare to a single stabilizer?
  A: Dual setup offers twice the damping force for better control with lifts or oversized wheels.

Shipping & Handling

• Method: Standard ground UPS/FedEx.
• Availability: In stock and ships within 1-2 business days.
• Packaging: Sturdy cardboard box with foam inserts to protect cylinders.