-12%
Sold out
Click to zoom in
Classic Square Body Height Without Sacrificing Ride Quality
The Skyjacker C125AKS8-N is a complete 2.5 inch suspension lift system built for 1988 to 1991 Chevrolet Blazer and GMC Jimmy four wheel drive models. This kit gives square body SUV owners the clearance needed for larger tires while Skyjacker engineers the geometry to preserve factory ride characteristics and steering feel. The C125AKS8-N includes front and rear components matched specifically to this generation of Blazer and Jimmy, along with Nitro shock absorbers tuned for the added ride height. Skyjacker designed this system to work with the stock drivetrain and suspension mounting points, so installation follows a straightforward bolt on process using the included hardware. Owners running 31 to 33 inch tires on their square body Blazer or Jimmy commonly choose the C125AKS8-N as the foundation for that setup. Every component in the kit is manufactured to Skyjacker specifications for durability under regular off road use.
Key Features
- 2.5 inch lift height for improved tire clearance
- Includes Nitro gas charged shock absorbers front and rear
- Engineered specifically for 1988-1991 Blazer/Jimmy 4WD chassis
- Retains factory ride quality and steering geometry
- Complete hardware kit for bolt on installation
- Compatible with larger wheel and tire packages
Fitment Table
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 1988-1991 | Chevrolet | Blazer | |
| 1988-1991 | GMC | Jimmy |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | C125AKS8-N |
| Brand | Skyjacker |
| Lift Height | 2.5 inches |
| Shock Type | Nitro N8000 |
| Kit Type | Suspension Lift System |
| UPC | Not Published |
What's Included
- Front and rear lift components sized for the 2.5 inch system
- Nitro shock absorbers, front and rear
- U-bolt kit
- Bushing kit
- Mounting hardware
About Skyjacker
Skyjacker Suspensions has been engineering suspension lift kits for trucks and SUVs for decades, with vehicle specific systems designed to preserve factory driving characteristics while adding real ground clearance. The C125AKS8-N reflects that approach for classic square body Blazer and Jimmy platforms, combining lift components and shocks matched to the same ride height.
Related Parts
- Skyjacker 4 inch lift systems for Blazer and Jimmy
- Skyjacker Nitro shock absorbers
FAQ
What is the C125AKS8-N?The C125AKS8-N is a complete Skyjacker 2.5 inch suspension lift system designed for 1988 to 1991 Chevrolet Blazer and GMC Jimmy four wheel drive models. It includes lift components and Nitro shock absorbers matched to the kit height.
Does the C125AKS8-N include shocks?Yes, this kit includes Nitro gas charged shock absorbers tuned specifically for the 2.5 inch lift height.
What tire size does the C125AKS8-N support?Most Blazer and Jimmy owners run 31 to 33 inch tires after installing this 2.5 inch lift system, though final clearance depends on wheel backspacing.
Is the C125AKS8-N a bolt on installation?Yes, the kit is designed to bolt onto factory mounting points using the included hardware without permanent modification.
Will the C125AKS8-N affect my factory ride quality?Skyjacker engineers this system to maintain a comfortable ride similar to stock while providing additional ground clearance.
Does the C125AKS8-N work on two wheel drive Blazer models?No, this kit is designed specifically for 1988 to 1991 four wheel drive Blazer and Jimmy models.
What is included in the hardware kit?The C125AKS8-N includes a U-bolt kit, bushing kit, and all mounting hardware needed for a complete installation.
Does Skyjacker provide installation instructions with the C125AKS8-N?Yes, detailed installation instructions are included with every Skyjacker lift system.
Install Instructions
- Park the vehicle on level ground and support the frame with jack stands at the OEM lift points.
- Remove the front and rear wheels.
- Support the front and rear axles with a floor jack to relieve suspension tension.
- Remove the factory shocks, springs and related mounting hardware.
- Install the new Skyjacker components at the front and rear following the included instructions.
- Install the Nitro shock absorbers at the upper and lower mounts using factory and supplied hardware.
- Reinstall the wheels and lower the vehicle to the ground.
- Torque all hardware to specification and recheck after the first 100 miles.
Prop 65 Warning
California residents: This product can expose you to chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Lift Kits
Shop lift kits, suspension lift kits, coilover lift kits, Pro-Truck lift kits, Stage 1, Stage 2, and Stage 2R lift systems, leveling kits, front strut spacer kits, rear lift blocks, coil spring lift kits, component boxes, upper control arms, lift springs, and reservoir shocks from Eibach, Skyjacker, Zone Offroad, Tuff Country, Belltech, MaxTrac, Fabtech, Rancho, and other truck and off-road suspension manufacturers. Find complete suspension lift packages, front-only strut leveling kits, rear-only block and shackle kits, Jeep and Gladiator component boxes with ADX M2.0 aluminum monotube shocks, Rancho QuickLift loaded struts, and lift hardware sized for daily-driven trucks, weekend adventure builds, and dedicated overland platforms. A properly matched lift kit raises ride height, opens up tire and wheel clearance, corrects factory rake on trucks and SUVs, and adds the ground clearance needed for larger tires and off-road use. This collection covers everything from 1.5-inch front s...
View Lift Kits Products
Skyjacker
Skyjacker suspension parts are stocked at Black Ops Auto Works for Jeep, Ford, Chevrolet, GMC, RAM, and Toyota trucks and 4x4 vehicles. Shop lift kits, leveling kits, dual rate coil springs, Black Max, Nitro 8000, Hydro 7000, and ADX M2.0 shocks, steering stabilizers, upper control arms, and suspension hardware. Every product is filterable by year, make, model, trim, and drivetrain so the correct Skyjacker part ships the first time. Black Ops Auto Works carries 1,596 Skyjacker SKUs across lift, leveling, and off-road suspension categories. What This Collection Covers Skyjacker builds off-road suspension systems for trucks and Jeeps that need more ground clearance, better ride control, improved steering stability, and stronger trail capability. Skyjacker is best known for lift kits, leveling kits, and long travel coil springs. Product Categories Lift kits and component boxes, leveling kits and strut spacers, dual rate and long travel coil springs, Black Max, Nitro 8000, Hydro 700...
View Skyjacker Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products