-11%
Skyjacker M9501 M95 Shock Absorber Jeep JK 07-17
Click to zoom in

Skyjacker 2007-2017 Jeep Wrangler (JK) M95 Performance Shock Absorber

Skyjacker
SKYM9501
803696221755
Shocks and Struts
20+ Units In Stock - Ships Next Business Day
$ 113.43 $ 99.82
$ 99.82

Built to Tame the Trail, Tuned for the JK

The Skyjacker M9501 Performance Shock Absorber is engineered specifically for 2007 to 2017 Jeep Wrangler JK models, delivering a monotube design that keeps operating temperatures cooler than traditional twin tube shocks even during extended off road sessions. The M9501 uses high pressure nitrogen gas and floating piston technology to produce a fast, controlled response over rocks, ruts and washboard trails while maintaining a comfortable highway ride. Skyjacker custom tunes the M9501 valving for the JK platform, so drivers get consistent damping whether crawling a rock ledge or cruising the interstate. A 46mm bore and hardened, double chrome plated rod add durability for JK owners who spend real time off the pavement. Direct bolt on installation means the M9501 drops into the factory shock mounts without cutting or drilling, and Skyjacker backs the shock with a limited lifetime warranty against defects in materials and workmanship.

Key Features

  • Monotube design for cooler running temperatures under load
  • High pressure nitrogen gas and floating piston technology for fast response
  • Custom tuned valving specific to the Jeep Wrangler JK platform
  • 180 degree directional mounting for flexible installation
  • Large 46mm bore for consistent damping control
  • Chrome plated piston rod resists corrosion and wear
  • Limited lifetime warranty against defects

Fitment Table

Year Range Make Model Trim
2007-2017 Jeep Wrangler Sport
2007-2017 Jeep Wrangler Rubicon
2007-2017 Jeep Wrangler Sahara
2007-2017 Jeep Wrangler Unlimited Sport
2007-2017 Jeep Wrangler Unlimited Rubicon
2007-2017 Jeep Wrangler Unlimited Sahara

Specifications

Detail Value
Manufacturer Part Number M9501
Brand Skyjacker
Shock Type M95 Performance Monotube
Bore Diameter 46mm
Mounting 180 degree directional
Warranty Limited lifetime
UPC Not Published

What's Included

  • One M9501 M95 Performance Monotube shock absorber
  • Mounting hardware

About Skyjacker

Skyjacker Suspensions has designed and manufactured suspension lift kits, shocks and steering components for trucks, Jeeps and SUVs for decades. Every M9501 shock is built and valved to match the specific demands of the Jeep Wrangler JK platform, giving off road drivers a dependable balance of control and comfort backed by a limited lifetime warranty.

Related Parts

  • Skyjacker M95 Performance shocks for other lift heights
  • Skyjacker lift kit components for Jeep Wrangler JK

FAQ

What is the M9501?

The M9501 is a Skyjacker M95 Performance Monotube shock absorber built specifically for 2007 to 2017 Jeep Wrangler JK models. It uses a monotube design with high pressure nitrogen gas for fast, consistent damping on and off road.

Does the M9501 fit both two door and four door JK models?

Yes, the M9501 fits Wrangler and Wrangler Unlimited JK models across Sport, Rubicon and Sahara trims for the 2007 to 2017 model years.

Is the M9501 sold as a single shock or a pair?

The M9501 is sold individually, so JK owners should order two shocks for a complete front or rear pair.

Will the M9501 work with a stock ride height JK?

Yes, this shock is designed for use at stock ride height and is valved for the factory JK suspension geometry.

What technology helps the M9501 run cooler than other shocks?

The monotube design combined with floating piston technology helps the M9501 dissipate heat more effectively than twin tube shocks during sustained off road use.

Does the M9501 require any cutting or drilling to install?

No, the M9501 is a direct bolt on replacement that uses the factory JK shock mounts.

What warranty does Skyjacker provide on the M9501?

Skyjacker covers the M9501 with a limited lifetime warranty against defects in materials and workmanship.

Can the M9501 be mounted in more than one orientation?

Yes, the M9501 features 180 degree directional mounting, though certain JK shock mounts may determine a specific orientation.

Install Instructions

  1. Park the JK on level ground, set the parking brake and chock the opposite set of tires.
  2. Raise the vehicle and support the frame rails with jack stands at the points listed in the OEM service manual.
  3. Remove the wheel at the corner being serviced.
  4. Place a jack under the lower control arm or axle to relieve suspension tension, then remove the factory shock.
  5. Install the M9501 at the upper mount first, securing it without fully tightening.
  6. Connect the lower mount using factory hardware, again leaving it snug but not fully torqued.
  7. Reinstall the wheel and lower the vehicle to the ground so full weight is on the tires before final tightening.
  8. Torque all mounting hardware to OEM specifications and recheck after the first 100 miles of driving.

Prop 65 Warning

California residents: This product can expose you to chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Request For Information

Have questions about Skyjacker 2007-2017 Jeep Wrangler (JK) M95 Performance Shock Absorber? Fill out the form below and we'll get back to you by the next business day.
Shocks and Struts

Shocks and Struts

Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...

View Shocks and Struts Products
Skyjacker

Skyjacker

Skyjacker suspension parts are stocked at Black Ops Auto Works for Jeep, Ford, Chevrolet, GMC, RAM, and Toyota trucks and 4x4 vehicles. Shop lift kits, leveling kits, dual rate coil springs, Black Max, Nitro 8000, Hydro 7000, and ADX M2.0 shocks, steering stabilizers, upper control arms, and suspension hardware. Every product is filterable by year, make, model, trim, and drivetrain so the correct Skyjacker part ships the first time. Black Ops Auto Works carries 1,596 Skyjacker SKUs across lift, leveling, and off-road suspension categories. What This Collection Covers Skyjacker builds off-road suspension systems for trucks and Jeeps that need more ground clearance, better ride control, improved steering stability, and stronger trail capability. Skyjacker is best known for lift kits, leveling kits, and long travel coil springs. Product Categories Lift kits and component boxes, leveling kits and strut spacers, dual rate and long travel coil springs, Black Max, Nitro 8000, Hydro 700...

View Skyjacker Products
Suspension

Suspension

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

View Suspension Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×