Skyjacker 2"KEY KT,88-06GMC,6LG,BKMAX

2 Inch Torsion Key Leveling Kit with Matched Black Max Shocks

The Skyjacker C101KE-B is a 2 inch front torsion key suspension leveling kit paired with Skyjacker Black Max shock absorbers for 1992-2006 GM 1/2 Ton 4WD 6-Lug Trucks & SUVs. Forged torsion keys re-engineer the factory torsion bar adjustment point to level the front end with the rear, correcting the factory rake without compromising ride quality or steering geometry. Shock extension brackets are included to maintain proper shock geometry at the new ride height, and the included Black Max shocks provide twin-tube, foam-cell damping matched to the increased height.

Key Features

• Forged torsion keys, not cast or machined, for OE-level durability
• 2 inch front leveling corrects factory rake
• Maintains factory ride quality and steering geometry
• Includes shock extension hardware
• Includes matched Skyjacker Black Max twin-tube shocks
• Backed by Skyjacker Limited Lifetime Warranty

Fitment

Specifications

What's Included

• 2 x Forged Torsion Keys
• Shock Extension Hardware
• 2 x Skyjacker Black Max Front Shock Absorbers
• Installation Hardware

About Skyjacker

Skyjacker Suspensions has engineered lift kits and suspension components in West Monroe, Louisiana since 1970. Skyjacker's forged torsion key leveling kits use the same manufacturing process as OE components to deliver a durable, precise front-end correction for two-wheel drive and four-wheel drive trucks and SUVs.

Related Parts

• Skyjacker 1987-1987 Chevrolet V30 Pickup Leaf Spring Bumper
• Skyjacker Suspension Front Leveling Kit 2002-2005 Chevrolet Suburban 2500 4WD Rear Wheel Drive

FAQ

The C101KE-B is a Skyjacker 2 inch forged torsion key front leveling kit for 1992-2006 GM 1/2 Ton 4WD 6-Lug Trucks & SUVs, including matched Black Max front shocks.

Ride height changes typically require a front-end alignment after installation. Skyjacker recommends a professional alignment following any torsion key adjustment.

No. This kit includes matched Black Max front shocks sized for the new ride height.

This is a front leveling kit. It is designed to correct the factory front-to-rear rake on applicable trucks and SUVs.

Skyjacker torsion keys are forged, not cast or machined, for increased strength and durability compared to OE keys.

Yes, Skyjacker backs this leveling kit with a Limited Lifetime Warranty against manufacturing defects.

A torsion bar removal tool, along with standard metric or SAE wrenches and sockets, a floor jack, and jack stands are required.

Install Instructions

1. Place the vehicle on a level surface and raise the front end, supporting it on jack stands.
2. Ensure the front suspension is fully unloaded before working near the torsion bar crossmember.
3. Mark the exposed length of the torsion bar adjuster bolt for reference, then relieve torsion bar preload with a torsion bar tool.
4. Remove the adjuster bolt and nut block, then slide the torsion bar out and remove the factory key.
5. Install the Skyjacker torsion key in the same orientation as the factory key, then reinsert the torsion bar.
6. Reload the torsion bar, reinstall the nut block and adjuster bolt to the noted exposed length.
7. Install the included Black Max shocks using the provided extension brackets.
8. Lower the vehicle, measure ride height, and fine-tune the adjuster bolt as needed before scheduling a professional alignment.

Prop 65 Warning

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.