Skyjacker 2"KEY KT,88-06GMC,6LG,HYDRO

Level the Front Stance Without Sacrificing Ride Quality

Skyjacker C101KE-H is a 2 inch forged torsion key leveling package with hydro shocks for supported six lug GM trucks and SUVs. It combines application matched suspension geometry with durable components for street, towing, and off road use while maintaining predictable control.

Key Features

• Forged torsion adjustment keys engineered for strength and consistent bar contact for the C101KE-H package
• Up to 2 inches of front leveling adjustment
• Includes matched hydro shocks for controlled damping
• Supports clearance for tires up to 33 inches when the vehicle configuration allows
• Designed to retain predictable factory style ride behavior
• Limited lifetime manufacturer warranty

Fitment

Specifications

What's Included

• Forged front torsion adjustment keys
• Matched hydro shocks
• Required installation hardware
• Installation instructions
• Application matched components for C101KE-H

About Skyjacker

Skyjacker has engineered suspension systems in West Monroe, Louisiana since 1970. The C101KE-H application reflects the brand's focus on vehicle specific spring geometry, controlled ride quality, and durable components backed by a limited lifetime warranty.

Related Parts

• Skyjacker 2"KEY KT,88-06GMC,6LG,NITRO
• Skyjacker Suspension Lift Kit Component 1975-1978 GMC K15 Suburban
• Skyjacker 2.5" SR FRT SPRGS 73-87 GM

FAQ

It is a 2 inch forged torsion key leveling package with hydro shocks for supported six lug GM trucks and SUVs. The package is engineered as an application matched Skyjacker suspension solution for controlled ride height, clearance, and handling.

Yes. The forged torsion keys provide up to 2 inches of front adjustment so the stance can be leveled while retaining the torsion bar suspension design.

Yes. This package includes hydro shocks selected for the supported application.

Fitment varies by model and suspension configuration. Confirm the vehicle against the application table and inspect the existing torsion bar suspension before ordering.

Skyjacker states that supported torsion key applications can allow tires up to 33 inches, but actual clearance depends on wheel offset, tire width, suspension condition, and body clearance.

Yes. A proper torsion bar unloading tool is required to safely remove and install the adjustment keys.

Yes. The front alignment should be checked and corrected after the ride height is changed.

The forged key design changes the indexed ride height while the included shocks help control the suspension. Final ride quality also depends on adjustment height, tire setup, and suspension condition.

Install Instructions

1. Confirm C101KE-H matches the vehicle and complete suspension configuration before disassembly.
2. Raise and securely support the vehicle according to the factory service procedure.
3. Unload the torsion bars with an approved torsion bar unloading tool.
4. Remove the original adjustment keys and install the supplied forged keys in the correct orientation.
5. Install the supplied shocks using the correct mounting hardware.
6. Set both torsion adjusters evenly and lower the vehicle onto level ground.
7. Measure final ride height, verify suspension clearance, and perform a professional alignment.
8. Recheck all fasteners after the first drive and after the suspension settles.

Prop 65 Warning

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.