-12%
Click to zoom in
Restore Rear Suspension Confidence on the Ramcharger
The Skyjacker M2068 ADX M2.0 Adventure Series rear shock brings modern monotube technology to the 1975-1993 Dodge Ramcharger. The M2068 uses an impact extruded CNC machined T6061-T6 aluminum body that dissipates heat far faster than a traditional steel shock, so the M2068 keeps its damping consistent through rough trails and long highway stretches. An internal floating piston inside the M2068 separates nitrogen gas from oil, eliminating the cavitation and fade that plague lower quality replacement shocks. Installing the M2068 out back restores confident, controlled rear axle control for daily driven and trail ready Ramchargers alike.
Key Features
- Impact extruded CNC machined T6061-T6 aluminum monotube body
- Full displaced valving on the M2068 inspired by off road racing
- Internal floating piston separates nitrogen gas from oil
- Large 53.5mm (2.11 inch) OD body with 46mm (1.81 inch) bore
- Teflon banded piston for smooth, consistent reaction
- Clear anodized polished aluminum finish on the M2068
- Factory set, vehicle specific dampening tune
- Rear position, direct bolt on installation
Fitment Table
| Year Range | Make | Model |
|---|---|---|
| 1975-1993 | Dodge | Ramcharger |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | M2068 |
| Position | Rear |
| Body Material | T6061-T6 Aluminum |
| Body Diameter | 2.11 in (53.5mm) |
| Bore Size | 1.81 in (46mm) |
| Warranty | 2 Year Limited |
| UPC | Not Published |
What's Included
- One Skyjacker M2068 ADX M2.0 rear shock absorber
- Mounting hardware where applicable to the M2068 application
- Manufacturer installation instructions
About Skyjacker
Skyjacker has engineered suspension systems in Louisiana since 1970, building a reputation for durable, American made lift kits, shocks, and steering components. The ADX M2.0 Adventure Series, including the M2068, reflects decades of off road racing derived engineering brought to daily driven trucks and SUVs.
FAQ
What is the M2068?The M2068 is a Skyjacker ADX M2.0 Adventure Series aluminum monotube rear shock absorber engineered for 1975-1993 Dodge Ramcharger applications.
Is the M2068 sold as a single shock or a pair?The M2068 is sold individually. Two units are required to replace both rear shocks.
What is the warranty on the M2068?The M2068 carries a 2 year limited warranty from Skyjacker against defects in materials and workmanship.
Can the M2068 be used with a lifted suspension?The M2068 is factory tuned for the specified Ramcharger application. Check the Skyjacker fitment guide to confirm the M2068 matches the intended lift height.
What material is the M2068 body made from?The M2068 uses an impact extruded CNC machined T6061-T6 aluminum monotube body for improved heat dissipation over steel bodied shocks.
Does the M2068 require any special tools to install?Standard hand tools are sufficient to install the M2068. A jack and jack stands are recommended for safe rear end support during installation.
Is the M2068 gas charged?Yes, the M2068 uses high pressure nitrogen gas paired with an internal floating piston for consistent damping performance.
Does the M2068 fit 2WD and 4WD Ramcharger models?Confirm axle configuration against the OEM shock specification for your specific Ramcharger before ordering the M2068.
Install Instructions
- Park the Ramcharger on level ground, set the parking brake, and chock the front wheels before working on the M2068 installation.
- Raise the rear of the vehicle and support the frame rails on jack stands at the points specified in the OEM service manual.
- Remove the rear wheels and place a jack under the rear axle housing to relieve suspension tension.
- Remove the factory rear shock and retain any reusable hardware for the M2068 installation.
- Connect the M2068 at the upper shock mount and secure without fully tightening.
- Connect the M2068 at the lower mount using OEM hardware, again leaving it snug but not fully torqued.
- Reinstall the rear wheels and lower the vehicle to the ground so full weight is on the tires.
- Torque the upper and lower M2068 mounting hardware to OEM specifications, then cycle the suspension and check for clearance issues.
Prop 65 Warning
WARNING: This product can expose you to chemicals including chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Skyjacker
Skyjacker suspension parts are stocked at Black Ops Auto Works for Jeep, Ford, Chevrolet, GMC, RAM, and Toyota trucks and 4x4 vehicles. Shop lift kits, leveling kits, dual rate coil springs, Black Max, Nitro 8000, Hydro 7000, and ADX M2.0 shocks, steering stabilizers, upper control arms, and suspension hardware. Every product is filterable by year, make, model, trim, and drivetrain so the correct Skyjacker part ships the first time. Black Ops Auto Works carries 1,596 Skyjacker SKUs across lift, leveling, and off-road suspension categories. What This Collection Covers Skyjacker builds off-road suspension systems for trucks and Jeeps that need more ground clearance, better ride control, improved steering stability, and stronger trail capability. Skyjacker is best known for lift kits, leveling kits, and long travel coil springs. Product Categories Lift kits and component boxes, leveling kits and strut spacers, dual rate and long travel coil springs, Black Max, Nitro 8000, Hydro 700...
View Skyjacker Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products