-28%
Click to zoom in
SKU: SNO-806-BRD | UPC: 653374501217
Snow Performance 4AN T-Fitting Black Anodized
The Snow Performance SNO-806-BRD black anodized 4AN T-fitting creates a clean, leak-free branch in water-methanol injection plumbing. It splits a single feed line to two nozzles or adds a pressure sensor without restricting flow or dropping pressure.
CNC-machined from billet aluminum with three genuine 4AN flare ports, this fitting handles 300 PSI burst pressure and full vacuum while remaining 100% compatible with any water/methanol mix, including pure methanol. At only 1.2 oz and with short 1.5-inch legs, it fits the tightest engine bays and delivers reliable performance under the 20-25 PSI typical of Snow Performance pumps. This is the exact T-fitting used in factory Stage 2 and Stage 3 kits and the go-to choice for every custom water-meth build.
Key Features
- Three true 4AN flare ports for stainless braided line
- Billet aluminum with durable black anodized finish
- 300 PSI burst rating and 20-25 PSI continuous duty
- 100% methanol safe with no brass or plastic
- Lightweight 1.2 oz and compact 1.5-inch leg length
- Universal fit for all Snow Performance and aftermarket 4AN systems
Product Notes
- Requires 4AN stainless braided line (not push-lock hose)
- Use thread sealant on any NPT adapters and torque to 15-20 ft-lbs
- California Proposition 65 warning applies
- Inspect regularly in high-vibration applications
Warranty: Limited lifetime against manufacturing defects
Installation Notes
- Cut line square, install olive and nut, flare end, then thread hand-tight plus 1/4 turn
- Route away from heat and moving parts
- Secure with zip ties to prevent chafing
- Pressure test entire system at 30 PSI before filling with fluid
This Part Fits
Universal fit for every water-methanol injection system that uses 4AN stainless braided line, including Snow Performance Stage 1, 2, 3, and all custom setups on gasoline turbo, supercharged, and diesel applications.
What's Included in the Purchase
- (1) Black Anodized 4AN T-Fitting (Billet Aluminum)
- Part Number: SNO-806-BRD
Total Package Weight: 0.2 lbs | Shipping Dimensions: 4" L x 2" W x 1" H
Why Choose Snow Performance?
- 20+ years leading water-methanol injection technology
- Every fitting proven in 1,000+ HP race and street builds
- Made in the USA with full technical support
Frequently Asked Questions
-
Q: Will it work with pure methanol?
A: Yes, completely resistant to 100% methanol -
Q: What line size does it accept?
A: Standard 4AN stainless braided line (-4 size) -
Q: Can I reuse it?
A: Yes, flare connections allow multiple assemblies without leaks
Shipping & Handling
- Method: Standard ground UPS/FedEx
- Availability: In stock, ships same or next business day
- Packaging: Anti-static bag inside protective box
Fabrication
Shop Fabrication Parts and Materials at Black Ops Auto Works for stainless steel tubing, titanium tubing, aluminum charge piping, mandrel bends, V-band clamps, flanges, merge collectors, AN fittings, PTFE hose kits, braided fuel and oil lines, heat shields, welding supplies, brackets, bungs, and hardware for building custom exhaust systems, turbo plumbing, intercooler piping, and fuel system routing. Start with tubing in stainless, titanium, or aluminum in the right diameter and wall thickness, then add mandrel bends, flanges, V-bands, and clamps to complete the joint work. Black Ops Auto Works carries 5,866 fabrication SKUs from Vibrant Performance, Ticon Industries, Stainless Bros, Radium Engineering, Fragola, DEI, and ATP Turbo. Why Custom Fabrication Custom fabrication solves fitment problems that no universal or pre-bent kit can address. Raw tubing, flanges, and fittings give the fabricator freedom to route exhaust around a turbo, snake charge pipe around accessories, hard-...
View Fabrication Products
Fittings
AN, NPT, and metric fittings for fuel, oil, cooling, brake, power steering, and intercooler systems are stocked at Black Ops Auto Works. Shop hose ends, swivel fittings, bulkhead adapters, elbow fittings, unions, tees, reducers, port plugs, banjo fittings, and thread adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, EcoBoost, 2JZ, and turbocharged or supercharged builds. Every product is filterable by size, thread type, and application so the correct fitting ships the first time. Black Ops Auto Works carries 2,252 fitting SKUs across AN hardware, NPT adapters, banjo fittings, and specialty plumbing hardware. What This Category Covers The Fittings collection covers the connective hardware that joins hoses, hard lines, and components across fuel, oil, cooling, brake, and forced induction plumbing. Fittings determine whether a fluid system stays leak free under the pressure, heat, and vibration loads found in performance street and race applications, so correct thread typ...
View Fittings Products
Snow Performance
Snow Performance parts and accessories Snow Performance water methanol injection and fuel system parts for turbocharged, supercharged, high compression, drag racing, street performance, Ford Mustang, Dodge Challenger, Dodge Charger, GM truck, and Coyote applications are stocked at Black Ops Auto Works. Shop Boost Cooler systems, pumps, controllers, nozzles, reservoirs, fittings, braided hose, fuel hats, fuel rails, filters, regulators, and supporting hardware for high output builds. Every product is filterable by the relevant shopping criteria so the correct item ships the first time. Black Ops Auto Works carries 224 Snow Performance SKUs across water methanol injection, controller, nozzle, reservoir, fuel hat, fuel rail, and plumbing categories. What This Brand Covers Snow Performance is known for Boost Cooler water methanol injection systems that support charge cooling and tuning headroom on properly calibrated forced induction builds. The collection also includes fuel deliver...
View Snow Performance Products