SPC Performance Mercedes C/E Class Rear Upper Control Arm Bushing Kit

Shop alignment components, camber kits, caster kits, and adjustable control arms at Black Ops Auto Works. Find vehicle-specific parts for correcting suspension alignment or preparing a performance setup, including toe links, adjustment cams, camber plates, and replacement mounts. Choose components based on your vehicle, suspension configuration, and measured alignment needs. Camber, Caster, and Toe Correction Camber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment. This collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster...

Find Chrysler Crossfire parts with body and installed brake equipment recorded. Rotor, sensor and hose service requires exact axle references; door-conversion hardware has its own body and installation requirements. Brake Assemblies and Sensors Match rotors by diameter, thickness, hub attachment and caliper. Select pads against the installed assembly before comparing compound characteristics. Wear sensors and hoses require compatible connectors or fittings, routing and service position. Check included hardware and sensors separately from friction components. Door-Conversion Body Coverage A vertical-door conversion requires exact Crossfire body coverage and the manufacturer’s installation procedure. Confirm coupe or roadster application for the specific kit. Review hinge, support, mounting and wiring-accommodation requirements as a complete job. Conversion hardware is separate from replacement door shells or body panels. Choose Your Part Identify Crossfire production and body. Recor...

Control arms for lifted trucks, SRT and Hellcat platforms, and off-road builds are stocked at Black Ops Auto Works. Shop tubular steel upper control arms, billet adjustable control arms, rear toe links, camber arm kits, and vehicle-specific control arm sets for Jeep Grand Cherokee and Trackhawk, Dodge Durango, Charger, Challenger, 300, and Magnum, Toyota 4Runner and FJ Cruiser, Lexus GX460 and GX470, Ford Mustang, and GM 1500 trucks. Every product is filterable by year, make, model, trim, and lift height so the correct control arm ships the first time. Black Ops Auto Works carries 789 control arm SKUs across upper, lower, adjustable, and toe link categories. What This Collection Covers Control arms connect the wheel hub and knuckle assembly to the vehicle frame and control wheel travel through compression and droop. Worn OEM control arms with loose ball joints or deteriorated bushings cause vague steering, uneven tire wear, and handling inconsistency. This collection covers arm ...

Choose Mercedes-Benz 190E brake and project components using the exact engine, fitted calipers and current modifications. Routine service and EFI upgrades require different levels of application review. Brake Fit and Intended Use Compare caliper identification, pad backing shape, axle and rotor material before selecting friction components. Confirm the exact engine and equipment variant where the application distinguishes them. Race compounds such as DTC-60 and HT-10 need operating-use review. Follow explicit road-use restrictions and the required rotor preparation and bedding instructions. Sensors, Protection and EFI Projects For sensor wires, match connector, length, routing and the exact brake-system application. For strut boots, compare service position and required protective components separately. A universal EFI kit requires manufacturer review of the actual fuel-injection system, engine condition, fuel delivery and calibration. Do not assume that a generic EFI label establis...

Compare Mercedes-Benz 260E suspension-service components using the installed chassis equipment and current ride height. Boots, bump stops, dampers and control-arm bushings serve different repair needs. Protective Parts and Damper Application The Bilstein B1 range includes service components such as boots and bump stops; these are separate from a complete replacement strut. Match service position, dimensions and exact contents. For a rear damper, verify chassis, suspension configuration, mounting and manufacturer exclusions. Lowering springs require their own engine and equipment application check. Bushings and Supporting Service For rear upper-control-arm bushings, identify the exact arm, sleeve dimensions and mounting. A bushing kit does not necessarily include a complete arm or mounting bolts. For brake hoses and bulbs, independently compare fittings or electrical specification. For a universal converter, confirm exact vehicle/emissions application as well as installation dimensio...

Compare Mercedes-Benz 300E wheel-spacing and EFI project options using the exact chassis, engine and current modifications. Complete installation requirements matter more than a shared numeric model reference. Wheel-Spacer System and Hardware Identify DR or DRA fastening design and compare bolt pattern, center bore, thread and wheel-bolt seat. Confirm engagement, centering and mounting clearance using the exact kit instructions. Record wheel width, offset and tire dimensions. Measure body and suspension clearance and confirm whether the advertised spacer width is per piece or per axle. EFI Kit and Supporting Service A universal EFI kit requires confirmation for the actual injection system, fuel delivery, controls and calibration. Review engine condition and existing modifications with the manufacturer and installer. Compare bottle-equipped and bottleless packages by exact contents. Brake hoses and sensor wires need independent fitting, connector and service-position checks. Choose Y...

Compare Mercedes-Benz 500E ignition and wheel-spacing options using the exact engine, wheels and installed brake package. Do not infer component fit from another model’s shared reference. Ignition and Brake Application Confirm the installed engine’s plug specification before comparing material or box quantity. Determine the complete service quantity separately. For brake pads, identify calipers, backing shape and rotor material. Select compound for actual use only after physical application is established. Spacers and Electrical Service Match DR/DRA fastening design, pattern, bore, thread, wheel-bolt seat and engagement. Respect rear-only restrictions and measure clearance with current wheels and tires. Verify bulb voltage, wattage, exact base and lamp function. Confirm spacer-width convention and package quantity rather than assuming one figure describes every installation. Choose Your Part Identify engine and fitted brake package. Confirm ignition specification and full service q...

Choose Mercedes-Benz C220 wheel, alignment and lighting components using exact generation, fuel type and fitted equipment. A shared C-Class reference does not establish every application. Spacers and Alignment Hardware Compare spacer pattern, bore, centering, thread, wheel-bolt seat and engagement. Review exact DR/DRA fastening instructions and measure wheel/tire clearance. For a camber/caster cam, identify the actual suspension location and supported adjustment function. It is separate from a complete control arm or an automatic cure for worn suspension components. Lighting and Engine Identity For a W202 taillight reference, confirm body, connector and mounting application before choosing finish. Bulbs require their own voltage, wattage, base and lamp-function check. For any ignition inquiry, identify petrol or diesel powertrain first. A spark-plug reference does not establish a service item for a diesel engine. Choose Your Part Identify generation, body and fuel type. Match space...

Compare Mercedes-Benz C230 suspension and brake-service components using exact generation, body and drivetrain. A damper application excluding 4Matic must be respected. Dampers and Protective Components Match front damper mounts, travel and chassis coverage, including the stated 4Matic exclusion. Confirm the actual drivetrain before selecting the component. Boots and bump stops are protective service parts, separate from complete dampers. Review kit contents, retained mounts and installation requirements. Brake Kits and Electronic Accessories For pad-and-rotor kits, compare caliper, pad shape, rotor dimensions and axle coverage. Confirm pairs, hardware and sensor contents before planning the repair. For pedal-control accessories, match the exact supported chassis, connector and harness. Another Mercedes application does not establish C230 support. Choose Your Part Identify body, generation and drivetrain. Respect 4Matic damper exclusions. Separate protective parts from complete dam...

Choose Mercedes-Benz C240 dampers and brake components using the actual chassis, drivetrain and fitted assemblies. Application exclusions and complete kit contents should be reviewed before purchase. Front Suspension Service Identify drivetrain before choosing a front damper. An application excluding 4Matic should not be extended to that configuration. Compare mounts, travel, retained components and protective boots or bump stops separately. A protective kit does not supply a complete replacement strut. Rotors, Friction and Accessory Fit Match rotor diameter, thickness, offset and mounting to the actual caliper. Compare pad backing shape and exact axle coverage before choosing compound. For an electronic pedal accessory, confirm supported year/chassis and connector. Existing electronic modifications need a separate manufacturer review. Choose Your Part Record chassis and actual drivetrain. Check front-damper application and exclusions. Compare protective and complete suspension con...

Plan Mercedes-Benz C280 suspension and brake service using exact chassis, drivetrain and current equipment. Front-damper exclusions and rotor geometry are independent selection requirements. Dampers and Strut Protection For the displayed front-damper family, respect the stated 4Matic exclusion and verify actual drivetrain. Compare mounts, travel and supported production coverage. For boots and bump stops, identify service position and exact contents. Review retained mounts, sleeves and fasteners rather than assuming a full strut assembly is supplied. Brake Geometry and Compound Use Match calipers, pad backing shape and rotor dimensions at each axle. A pad/rotor kit must identify exact axle and complete supplied components. Choose compound for actual driving use and compatible rotor material. For pedal-control products, compare the exact supported connector and harness separately. Choose Your Part Identify chassis and drivetrain. Respect damper equipment exclusions. Separate boots/m...

Compare Mercedes-Benz C32 AMG brake components using the fitted W203 calipers, rotor package and intended driving use. Other AMG or shared pad references require their own exact application check. Front and Rear Friction Fit The displayed C32 AMG references identify 2002–2004 W203 front-pad applications. Confirm exact production and backing shape, then identify rear components independently. Match rotor material, dimensions and mounting to the chosen pads. A compound label does not identify every brake-package variation. Operating Use and Electronic Accessories Review manufacturer intended-use, preparation and bedding guidance before changing compound. Compare required sensors and hardware against exact contents. For a pedal-control accessory, confirm supported chassis, pedal connector and harness. A product for another Mercedes family should not be assumed compatible with the C32. Choose Your Part Identify W203 production and fitted brake equipment. Match front and rear pad applic...

Choose Mercedes-Benz C320 suspension and brake-service components by exact chassis, body and drivetrain. Front-damper equipment restrictions and complete kit contents require separate checks. Dampers and Protective Pieces Confirm the actual drivetrain before selecting a front damper with a stated 4Matic exclusion. Match chassis, mounting and travel using the exact manufacturer application. Boots and bump stops are separate protective service components. Compare retained mounts, sleeves and fasteners rather than assuming a complete strut assembly is supplied. Brake Geometry and Kit Contents Match caliper, pad backing shape and complete rotor dimensions at the required axle. Review pad-and-rotor kit coverage and any supplied sensors or hardware. For pedal-control accessories, confirm the exact chassis, connector and harness independently of brake or suspension applications. Choose Your Part Identify chassis, body and drivetrain. Respect front-damper 4Matic exclusions. Separate protec...

Compare Mercedes-Benz C350 brake and suspension-service components using exact generation, body and drivetrain. Mounts, protective boots and complete dampers serve different repair needs. Suspension Position and Equipment For front dampers, verify drivetrain coverage and respect stated 4Matic exclusions. Compare mounting, travel and exact production application. For rear mounts, identify mounting pattern and installed suspension separately. A boot, bump stop or mount package does not necessarily supply a complete damper assembly. Brake Kits and Electronic Fit Match pad shape, caliper and rotor geometry at each axle before comparing compound. Confirm whether the kit supplies pairs, hardware or sensors. Pedal accessories require exact supported chassis, connector and harness. Include existing electronic changes when requesting application help. Choose Your Part Identify generation, body and drivetrain. Match front damper and rear-mount applications. Review protective versus complete ...

Compare Mercedes-Benz C36 AMG brake, alignment and wheel-spacing components using the exact chassis and installed equipment. Replacement ignition parts need a separate engine specification check. Brakes and Alignment Components Match caliper, pad backing shape and full rotor geometry before choosing a friction kit. Confirm exact axle coverage, hardware and sensor contents. For an alignment cam, identify the supported location, adjustment function and installation requirements. It is separate from a complete control arm or a repair for worn suspension joints. Spacers and Ignition Service Compare DR/DRA fastening design, pattern, bore, centering, thread, bolt seat and engagement. Measure clearance using actual wheels and tires. For plugs, match installed engine and required dimensional/operating specification. Confirm service quantity separately from a four-plug box. Choose Your Part Identify chassis and fitted brakes. Confirm alignment-cam location and function. Compare spacer hardw...

Compare Mercedes-Benz C43 AMG exhaust and brake options using exact generation, body and engine. A W205 exhaust application does not establish support for every C43 configuration. Exhaust and Valve-Accessory Contents AWE identifies W205 C43 applications within its C400/C450/C43 exhaust suite. Match exact system number, body and existing exhaust equipment. The displayed electronic valve-simulator package states two units. Confirm that the exact simulators are required and supported for the chosen system rather than treating them as exhaust valves or mufflers. Brake Equipment and Service Interfaces Match rotor diameter, thickness, offset and mounting to the fitted calipers. Compare pad backing shape, axle coverage and any AMG Sport equipment notes. Sensor wires and installation hardware need their own connection and contents checks. Choose friction material for intended use after exact fit is established. Choose Your Part Identify generation, body and engine. Confirm W205 exhaust sys...

Choose Mercedes-Benz C55 AMG brake and chassis-service components using the fitted assemblies rather than another AMG model’s shared reference. Suspension, alignment and wheel interfaces need separate checks. Brake and Damper Applications Match caliper, pad backing shape and rotor package before comparing compounds. A C32 reference does not establish every C55 brake application. For front dampers, verify exact chassis and equipment support, including stated drivetrain restrictions. Compare mounts and travel independently of brake fit. Alignment Cams and Spacers For a camber/caster cam, identify supported location, adjustment function and installation procedure. Inspect worn joints and mounting hardware as part of alignment planning. For DR/DRA spacers, match pattern, bore, centering, thread, bolt seat and engagement. Measure current wheel/tire clearance before choosing width. Choose Your Part Identify fitted C55 brake and suspension equipment. Match pad geometry and damper applicat...

Compare Mercedes-Benz CLK320 brake and suspension-service components using exact generation, body and installed equipment. Kit names and shared family references do not establish complete application coverage. Brake-Kit Geometry and Contents Match fitted calipers, pad backing shape and rotor diameter, thickness, offset and mounting. Identify front and rear applications independently. For a pad-and-rotor kit, confirm supplied axle, pair quantity, hardware and sensors. Compare compound for intended driving use after physical fit. Suspension and Pedal Interfaces For dampers, match exact chassis, drivetrain, mounts and travel; respect any 4Matic exclusion. Boots and bump stops are separate protective service pieces. For electronic pedal accessories, compare supported chassis, connector and harness independently. Review existing electronic changes and exact installation instructions. Choose Your Part Identify generation, body and drivetrain. Match brake geometry and axle coverage. Revie...

Choose Mercedes-Benz CLK350 brake and chassis components using exact body, generation and actual wheel equipment. Brake geometry and wheel spacing require independent measurements. Friction and Suspension Applications Identify calipers, pad backing shape and full rotor dimensions before selecting a kit. Confirm axle coverage, pairs and required hardware. For suspension dampers or boots, compare exact chassis, drivetrain restrictions, mounts and service position. A protective kit is separate from a complete damper. Wheel-Spacer and Electronic Fit Match DR/DRA fastening design, pattern, bore, centering, thread, bolt seat and engagement. Measure clearance using actual wheel width, offset and tire size. Pedal-control accessories require their own supported chassis, harness and connector. Include existing modifications in that review. Choose Your Part Identify body, generation and drivetrain. Match brake geometry and kit contents. Check damper restrictions and protective pieces. Review ...

Plan Mercedes-Benz CLK430 brake service from the fitted calipers and rotor dimensions. Compare kit contents and intended compound use separately from physical application. Pads and Rotor Geometry Identify caliper, pad backing shape and rotor material before choosing friction components. Compare front and rear specifications independently. Match rotor diameter, thickness, offset and mounting. A shared product family or slotted finish does not identify the exact installed package. Complete Kits and Accessory Application For pad-and-rotor sets, confirm axle coverage, supplied quantity, sensors and hardware. Review exact manufacturer preparation and bedding guidance. For an electronic pedal accessory, confirm supported chassis and connector rather than relying on another Mercedes-family title. Include any existing electronic modifications. Choose Your Part Identify fitted calipers and rotor material. Compare complete rotor geometry by axle. Review kit quantity, sensors and hardware. Co...

Compare Mercedes-Benz CLK500 brake, ignition and wheel-spacing components using exact generation and installed equipment. Engine and wheel applications need separate confirmation from brake fit. Friction and Protective Service Parts Match caliper, pad backing shape and rotor dimensions by axle. Choose compound for actual driving use after physical application is established. For strut boots, identify service position and exact contents. Protective pieces do not provide a complete damper or correct worn mounts automatically. Spacers and Ignition Specification Compare DR/DRA system, pattern, bore, centering, thread, bolt seat and engagement. Measure clearance with actual wheels and tires. For spark plugs, match the fitted engine’s required specification and complete service quantity. Material or box count alone does not determine application. Choose Your Part Identify generation, engine and fitted brakes. Match friction geometry and protective contents. Review spacer fasteners and me...

Choose Mercedes-Benz CLK55 AMG brake and suspension-service components using exact production and fitted calipers. Competition pad references require a separate operating-use review. Race-Pad and Road-Service Choices The displayed DTC-60 front-pad reference identifies 2005–2006 CLK55 AMG coverage. Confirm exact calipers, pad shape and rotor package before choosing it. Compare race operating requirements with actual use. A similar backing shape across compounds does not establish identical road behavior or rotor preparation. Sensors and Damper Application Match brake-sensor connector, length, routing and service position independently from pad fit. Review complete hardware contents. For front dampers, confirm exact chassis support, mounts, travel and drivetrain restrictions. Electronic pedal accessories need separate supported connector and harness confirmation. Choose Your Part Identify production and installed calipers. Match exact front-pad application and rotor material. Choose ...

Compare Mercedes-Benz CLK550 suspension, brake and wheel-spacing parts using exact body, drivetrain and installed equipment. Shared AMG or C-Class references need specific support. Dampers, Boots and Friction Fit Match front-damper chassis, mounts, travel and stated drivetrain exclusions. Compare protective boots and retained components separately from complete assemblies. Identify actual calipers, pad backing shape and rotor material before selecting friction compound. Another model’s brake reference does not establish every CLK550 application. Wheel Interfaces and Electronic Accessories For DR/DRA spacers, compare pattern, bore, centering, thread, bolt seat and engagement. Measure clearance with the fitted wheel width, offset and tires. For pedal-control accessories, confirm exact supported chassis, connector and harness independently. Existing electronic changes need review before installation. Choose Your Part Identify body, drivetrain and current suspension. Match damper restr...

Choose Mercedes-Benz CLK63 AMG brake components using exact production, variant and installed brake package. Shared pad-shape references do not establish one compound for every use. Front Pads and Rotor Material The visible DTC-60 reference identifies 2007–2008 CLK63 AMG front applications. Confirm exact caliper, backing shape and rotor material before selecting the part. Identify rear components and any special brake package independently. Review race operating requirements and the manufacturer’s rotor preparation and bedding guidance. Sensors and Complete Hardware Compare sensor connector, length, routing and service position separately from pad geometry. A hardware kit must match the actual assembly and supply the required pieces. For pedal-control accessories, confirm exact supported chassis and electronic interface. Existing modifications and variant equipment need their own application review. Choose Your Part Identify production, variant and actual brake package. Match front...

Choose Mercedes-Benz E300 brake-service parts using the exact chassis and brake equipment. Separate rotor geometry, friction use and installation hardware before comparing complete kits. Rotor and Caliper Identification Record the installed front and rear calipers and rotor dimensions. Another E-Class or GLC rotor reference does not establish E300 compatibility without exact manufacturer support. Compare mounting, thickness, overall height and any equipment exclusions. Determine pad backing shape from the installed caliper rather than from compound name. Friction Kits and Supporting Parts For EBC S5 Yellowstuff/GD references, check exact application, axle and supplied contents. Review intended use, rotor preparation and bedding instructions. Match wear-lead connectors and routing, rear hardware and protective boots independently. A boot package should not be treated as a complete damper assembly. Choose Your Part Identify chassis, production and installed brakes. Compare rotor geom...

Compare Mercedes-Benz E320 rear rotors, friction kits and protective suspension parts by exact generation and installed equipment. Broad production coverage requires a component-specific application check. Rear Rotor Dimensions A visible DFC E320 rear Geomet rotor reference spans 1994–2011. Confirm the exact rotor number and supported brake configuration rather than extending that range to every E320. Compare diameter, thickness, overall height and parking-brake arrangement. Check front components independently and include any brake conversions when identifying the assembly. Friction and Suspension Protection For EBC S5 Yellowstuff/GD kits, confirm axle, caliper application and complete contents. Review operating use and manufacturer bedding requirements. Front or front/rear protective boot references need their own exact damper application. Inspect retained mounts, bump stops and other components according to the installation instructions. Choose Your Part Identify exact E320 gene...

Choose Mercedes-Benz E420 brake and suspension-protection parts using exact production and fitted assemblies. Component identification matters more than shared E-Class naming when comparing applications. Rear Rotors and Friction Kits Compare installed rear-rotor diameter, thickness, overall height and parking-brake arrangement. An E320 rotor reference requires explicit E420 support before selection. For EBC S5 Yellowstuff/GD kits, confirm exact axle, pad backing shape, rotor compatibility and contents. Review intended use and the manufacturer’s preparation and bedding instructions. Protective Boots and Service Hardware Match front or front/rear boot packages to the actual dampers and mounting arrangement. Review bump stops, mounts and fasteners separately from the protective parts supplied. Compare wear-lead connectors, routing and service position against the installed brakes. Front friction and rotor applications require their own geometry and caliper checks. Choose Your Part Ide...

Choose Mercedes-Benz E430 brake components by installed caliper, rotor dimensions and exact production. A related E-Class application should be confirmed against the proposed manufacturer part number. Rear Rotors and Parking-Brake Geometry Match rear-rotor diameter, thickness, overall height and parking-brake arrangement. An E320 rear-rotor reference does not establish E430 fit without manufacturer confirmation. Identify front brake components separately. Include original part numbers and any brake conversion details when requesting an application check. Friction Kits and Pedal Accessories For EBC S5 Yellowstuff/GD kits, compare exact vehicle coverage, axle, pad backing shape and rotor contents. Review driving use and manufacturer bedding instructions. Pedal-control accessories need an independently supported chassis, connector and harness. A fitment reference for another Mercedes family is insufficient for the E430. Choose Your Part Identify production and fitted front/rear brakes...

Choose Mercedes-Benz E500 rear brake kits using exact production and installed rotor construction. Confirm solid or vented applications before comparing compound choices and package contents. Solid and Vented Rear Applications Visible kit references include solid-rear E-Class applications and other CL/CLS brake packages. Match the actual E500 rotor construction, caliper and manufacturer application. Compare rotor diameter, thickness, overall height and parking-brake arrangement. A shared family name or compound label does not establish physical compatibility. Complete Brake and Suspension Service Check pad, rotor, sensor and hardware contents independently. Match wear-lead connector, length and routing to the required service position. Protective strut boots need their own damper application and are not complete suspension assemblies. For pedal-control accessories, verify exact chassis and electronic interface separately. Choose Your Part Identify generation and fitted rear brake c...

Choose Mercedes-Benz E55 AMG friction parts by exact generation and installed calipers. A shared supercharged-engine or AMG reference does not identify every front and rear brake application. Pad Shape Before Compound Choice Record front and rear calipers, pad backing shape and rotor material. Confirm exact E55 support before selecting parts also referenced for CL55 or C32 models. Compare compound use only after fit is established. Review road or competition operating requirements and manufacturer rotor preparation and bedding instructions. Protective Components and Electronics For strut boots, confirm actual damper application and supplied protective pieces. Inspect retained mounts and bump stops according to the installation requirements. Pedal-control accessories require exact chassis, connector and harness support. Include existing electronic changes when requesting application review. Choose Your Part Identify exact E55 generation and brake equipment. Match pad backing shape a...

Choose Mercedes-Benz SL500 friction and rotor kits by exact generation and installed brake construction. Solid and vented applications require separate confirmation. Rotor Construction and Caliper Fit Identify actual front and rear calipers, pad backing shapes and rotor material. An E350 solid-rear or CL500 friction reference requires explicit SL500 support. Compare rotor diameter, thickness, height, mounting and required construction. A coating or compound label does not establish complete physical fit. Kit Contents and Electronic Accessories For EBC S12 or S13 kits, confirm exact axle, friction specification and supplied rotor/pad quantities. Review intended use and manufacturer bedding guidance. Match wear-lead connectors, routing and hardware independently. Pedal-control accessories require exact chassis, connector and harness support. Choose Your Part Identify generation and fitted brake construction. Match caliper, pad shape and full rotor geometry. Compare kit axle, compound...

Compare Mercedes-Benz SL600 friction and electronic accessories by exact generation and installed equipment. Another SL or AMG reference requires specific SL600 support. Calipers and Rotor Material Match front and rear calipers, pad backing shapes and rotor material independently. Confirm complete rotor diameter, thickness, height and mounting for the required axle. Compare road or competition compound use only after physical application is established. A shared CL55 or C63 reference does not identify every SL600 brake package. Sensors and Pedal Interfaces Match wear-lead connectors, routing, length and service position. Review clips and required hardware separately from friction contents. Pedal-control accessories need exact chassis, connector and harness support. Include engine, electronic and brake modifications in an application enquiry. Choose Your Part Identify generation and actual brake equipment. Match backing shape and full rotor geometry. Review supported compound use an...

Choose Mercedes-Benz SLK230 wheel-spacing and ignition parts by exact production and installed equipment. Confirm full fastener and plug specifications before selection. Spacer Fastening and Clearance Compare DR/DRA fastening method, pattern, bore and centering. Match exact wheel-bolt thread, seat and required engagement rather than spacer width alone. Measure clearance with current wheels, tires and suspension. A 12x1.5 reference should not be exchanged for 14x1.5, even with a matching bolt pattern. Ignition, Alignment and Lighting Match spark-plug reach, seat, heat range and specified gap for the exact engine. Confirm required quantity independently from package count. Alignment hardware needs exact arm/service-position support. For bulbs, match base, voltage, wattage and lamp application; pedal accessories need separate electronic coverage. Choose Your Part Identify production, engine and current wheel setup. Confirm spacer system and exact fastening specification. Measure clear...

Choose Mercedes-Benz SLK280 brake kits and spacers by exact production and installed assemblies. Related E-Class or C-Class references require specific roadster support. Rotor and Friction Kit Identification Match actual front/rear calipers, pad backing shapes and rotor material. Compare diameter, thickness, height and mounting independently at each axle. For EBC S5 Yellowstuff/GD kits, confirm exact application, axle and complete pad/rotor contents. Review intended use and manufacturer bedding instructions. DR/DRA Fasteners and Electronics Confirm exact spacer fastening system, pattern, bore, centering, wheel-bolt thread and seat. Measure clearance using current wheels, tires and suspension. Pedal-control accessories require separate exact chassis, connector and harness support. Review brake sensors and installation hardware independently from spacer contents. Choose Your Part Identify production and fitted brake assemblies. Match full rotor geometry and kit axle. Confirm spacer s...

Compare Mercedes-Benz SLK300 brake kits, spacers and electronic accessories by exact generation and engine. Earlier and later SLK applications need separate manufacturer confirmation. Generation and Brake Assembly Identify actual front/rear calipers, backing shapes and rotor material. Compare complete rotor dimensions and mounting rather than transferring E320 or C230 coverage. For EBC S5 Yellowstuff/GD kits, confirm exact axle, supported application and complete contents. Review intended use and manufacturer bedding guidance. Wheel and Electronic Interfaces For DR spacers, match pattern, bore, centering, exact thread, seat shape and required engagement. Measure clearance with current wheel width, offset and tires. Pedal-control accessories need exact generation, connector and harness support. Review wear leads and brake hardware independently from spacer contents. Choose Your Part Identify exact generation and engine. Match fitted brakes and complete kit application. Confirm space...

Choose Mercedes-Benz SLK32 AMG brake, spacer and alignment parts using exact installed equipment. Shared friction references need explicit AMG roadster support. Calipers and Compatible Friction Match front/rear calipers, pad backing shapes and rotor material independently. A similar Crossfire SRT6 reference does not establish every SLK32 application. Compare supported Redstuff, Yellowstuff or competition use after physical fit. Review full rotor geometry, sensors and manufacturer bedding requirements. Spacer and Alignment Interfaces For DR/DRA spacers, confirm system, pattern, bore, centering, exact thread and wheel-bolt seat/engagement. Measure clearance with current wheels and suspension. Camber/caster hardware needs exact arm and service-position support. Electronic pedal accessories require separate chassis and harness confirmation. Choose Your Part Identify actual AMG brake and suspension equipment. Match backing shapes, rotor material and use. Confirm spacer fasteners, center...

Compare Mercedes-Benz SLK320 brake kits, wheel-spacing and ignition parts by exact production and installed assemblies. Confirm each application independently. Brake Kits and Rotor Geometry Match actual calipers, pad backing shapes and rotor material before selecting friction. A Crossfire reference requires explicit SLK320 manufacturer support. For EBC S5 Yellowstuff/GD kits, compare exact axle, rotor diameter/thickness/height/mounting and supplied contents. Review intended use and bedding instructions. Spacers and Spark-Plug Specification For DR/DRA spacers, match system, pattern, bore, centering, exact fasteners and measured clearance. Follow instructions for the specified fastening method. Select spark plugs by exact engine application, reach, seat, heat range and specified gap. Confirm required quantity separately from four-plug boxes. Choose Your Part Identify production and fitted brakes. Match kit axle, rotor geometry and complete contents. Confirm spacer interfaces and meas...

Choose Mercedes-Benz SLK350 friction and rotor kits by exact generation and fitted calipers. Shared C-Class or CLA references need specific SLK support. Front and Rear Brake Matching Identify backing shape and rotor material independently at each axle. Compare complete rotor dimensions and mounting before selecting a kit. For S5 Yellowstuff/GD references, confirm exact production, axle and supplied pads/rotors. Another model’s compound label does not establish physical fit. Operating Use and Electronic Interfaces Review intended compound use, compatible rotor material and manufacturer bedding instructions. Match wear leads, clips and installation hardware separately. Pedal-control accessories require exact generation, connector and harness support. Include electronic modifications and any brake conversions when requesting application help. Choose Your Part Identify generation and actual brake assemblies. Match pad shape and complete rotor geometry. Review kit axle, intended use and...

Compare Mercedes-Benz SLK55 AMG brake compounds by exact generation and installed performance package. A shared backing shape does not establish one friction choice for every use. Brake Package and Compound Use Identify actual front/rear calipers, pad backing shapes and rotor material. CLK55 or CLK63 references need exact SLK55 coverage, including relevant package exclusions. Compare HPS, Performance Ceramic, HP+ or DTC-60 options only after application is confirmed. Review the manufacturer’s road/competition operating requirements and compatible rotor guidance. Rear Service and Electronics Match rear-pad geometry and full rotor dimensions independently from front coverage. Review wear-lead connectors, routing and required hardware. Pedal-control accessories need exact chassis, connector and harness support. Include current electronic and brake modifications when asking for application guidance. Choose Your Part Identify generation and actual performance package. Match backing shap...

Shop SPC Performance alignment parts and professional service tools by exact manufacturer part number, including adjustable control arms, ball joints, camber and caster kits, toe components, bushings, shims, alignment hardware, and specialty tools.Choose Your Part Match the complete SPC manufacturer part number Confirm the full year, make, model, mounting position, suspension configuration, and application notes Compare correction range, component dimensions, material, interface, and included hardware Plan for professional installation and a complete post-installation alignment Vehicle FitmentUse vehicle filters to narrow the selection, then verify every engine, drivetrain, chassis, mounting and factory-equipment requirement in the product details. Components selected by dimensions or system interface require a complete specification check rather than a vehicle-name match.Related SPC Performance Products All SPC Performance products SPC EZ Cam XR 12mm bolts SPC front adjustable uppe...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...