-0%
Click to zoom in
Spectre 9900 Cold Air Intake Kit for 1999-2007 GM Truck V8 4.8L, 5.3L, and 6.0L
Part number 9900 from Spectre Performance is a direct-fit cold air intake system designed for 1999-2007 Chevrolet and GMC full-size trucks, SUVs, and vans equipped with the 4.8L, 5.3L, or 6.0L Vortec V8 engine. The 9900 kit includes a clear-anodized polished aluminum intake tube, a Spectre HPR red synthetic filter, and an application-specific black powder-coated heat shield to replace the factory air box and deliver up to 50% more airflow for improved horsepower, torque, and throttle response. Installation takes approximately 60-90 minutes with no tune required.
Features and Benefits
- Clear-anodized polished aluminum intake tube for improved airflow and appearance
- Application-specific black powder-coated heat shield
- Spectre HPR red pre-oiled, washable, reusable synthetic air filter
- Up to 50% more airflow than the factory air box
- All boots, velocity stack, stainless steel clamps, and hardware included
- MAF sensor and breather hose provisions integrated into the tube
- No tune required, will not void vehicle warranty
- 90-day manufacturer warranty
Fitment Table
| Year | Make | Model | Trim |
|---|---|---|---|
| 1999 | Chevrolet | Silverado 1500 | All V8 4.8/5.3/6.0L |
| 2000 | Chevrolet | Silverado 1500 | All V8 4.8/5.3/6.0L |
| 2001 | Chevrolet | Silverado 1500 | All V8 4.8/5.3/6.0L |
| 2002 | Chevrolet | Silverado 1500 | All V8 4.8/5.3/6.0L |
| 2003 | Chevrolet | Silverado 1500 | All V8 4.8/5.3/6.0L |
| 2004 | Chevrolet | Silverado 1500 | All V8 4.8/5.3/6.0L |
| 2005 | Chevrolet | Silverado 1500 | All V8 4.8/5.3/6.0L |
| 2006 | Chevrolet | Silverado 1500 | All V8 4.8/5.3/6.0L |
| 2007 | Chevrolet | Silverado 1500 Classic | All V8 4.8/5.3/6.0L |
| 1999 | GMC | Sierra 1500 | All V8 4.8/5.3/6.0L |
| 2000 | GMC | Sierra 1500 | All V8 4.8/5.3/6.0L |
| 2001 | GMC | Sierra 1500 | All V8 4.8/5.3/6.0L |
| 2002 | GMC | Sierra 1500 | All V8 4.8/5.3/6.0L |
| 2003 | GMC | Sierra 1500 | All V8 4.8/5.3/6.0L |
| 2004 | GMC | Sierra 1500 | All V8 4.8/5.3/6.0L |
| 2005 | GMC | Sierra 1500 | All V8 4.8/5.3/6.0L |
| 2006 | GMC | Sierra 1500 | All V8 4.8/5.3/6.0L |
| 2007 | GMC | Sierra 1500 Classic | All V8 4.8/5.3/6.0L |
Specifications
| Specification | Detail |
|---|---|
| Part Number | 9900 |
| UPC | 089601990064 |
| Tube Finish | Clear Anodized |
| Tube Material | Aluminum |
| Filter Color | Red |
| Filter Type | Synthetic / Oiled |
| Heat Shield | Included, Black Powder Coat |
| CARB Status | Not CARB Legal |
| Warranty | 90 Days |
What Is Included
- Clear-anodized aluminum intake tube
- Spectre HPR red synthetic air filter
- Black powder-coated heat shield
- Velocity stack, rubber couplers, stainless clamps, all hardware
Frequently Asked Questions
What does Spectre 9900 fit?
Part 9900 fits 1999-2007 Chevrolet Silverado and GMC Sierra trucks and compatible SUVs with 4.8L, 5.3L, or 6.0L Vortec V8 engines.
Does Spectre 9900 require a tune?
No, 9900 uses the factory MAF sensor and requires no ECU tuning.
Is 9900 CARB exempt?
No, 9900 is not CARB legal and is not for use in California or states with similar emissions laws.
What is the replacement filter for 9900?
The HPR red filter in the 9900 can be ordered directly from Spectre as a replacement when the filter requires servicing.
Does 9900 fit the 2002 Chevy Tahoe or Suburban?
Yes, the 9900 is also designed for compatible full-size GM SUVs including the Tahoe and Suburban. Verify fitment using the product tags or Spectre's fitment guide.
How does the clear anodized finish hold up over time?
Clear-anodized aluminum provides a durable, corrosion-resistant finish that maintains its appearance in engine bay environments.
How long is the installation?
Most installations take 60-90 minutes with basic hand tools.
What warranty does Spectre 9900 carry?
Spectre provides a 90-day limited warranty on this intake kit.
Installation Instructions
- Disconnect the negative battery cable
- Remove the factory air box and all attached intake tubing
- Disconnect the MAF sensor harness and breather hoses
- Mount the Spectre heat shield in the factory air box location
- Connect the clear-anodized aluminum tube between the heat shield and throttle body
- Reconnect the MAF sensor and all breather hoses to the designated ports on the new tube
- Install the Spectre HPR red filter and tighten the clamp
- Reconnect the battery, start the engine, and verify no air leaks
Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Air Intake Systems
Air Intake Systems, Cold Air Intakes & Performance Intake Parts Shop premium air intake systems, cold air intakes, short ram intakes, air boxes, intake components, intake elbows, mass air flow sensors, scoops, snorkels, recharge kits, silicone couplers, and intake hoses at Black Ops Auto Works. This collection is built for enthusiasts looking to improve airflow, throttle response, induction sound, horsepower potential, and under-hood performance across cars, trucks, SUVs, Jeeps, muscle cars, off-road builds, and supercharged HEMI platforms. Whether you are upgrading a daily driver, Dodge Charger, Dodge Challenger, Dodge Durango, Jeep Grand Cherokee, Jeep Trackhawk, Ram TRX, Ram RHO, Toyota Tundra, Chevy Silverado, Chevrolet Camaro, Corvette, BMW, Cadillac CTS-V, Honda, Hyundai, Infiniti, or a custom performance build, our Air Intake Systems collection includes parts designed for fitment, durability, and real-world performance. Air Intake Systems from Top Brands Shop trusted air ...
View Air Intake Systems Products
Cold Air Intakes
Shop All Air Intakes & Performance Intake Kits Premium cold air intakes, performance air intake systems, short ram intakes, carbon fiber intakes, sealed air box intakes, HEMI intakes, Hellcat intakes, Trackhawk intakes, TRX intakes, and vehicle-specific intake upgrades. This collection is built for enthusiasts looking to improve airflow, throttle response, induction sound, horsepower potential, and under-hood styling across street cars, muscle cars, trucks, SUVs, Jeeps, off-road builds, and diesel applications. Cold Air Intakes from Top Brands Shop trusted cold air intake brands including Legmaker Intakes, aFe Power, JLT Performance, K&N Engineering, Airaid, Corsa Performance, Injen Technology, Spectre Performance, and Wehrli Custom Fabrication. These brands produce cold air intakes, short ram intakes, carbon fiber intake systems, sealed intake kits, performance air filters, intake tubes, and vehicle-specific air intake upgrades for domestic, import, truck, Jeep, SUV, diesel...
View Cold Air Intakes Products
Spectre
Since 1983, Spectre Performance has been at the forefront of innovation, providing unique and high-quality automotive parts and components that fuel your car or truck obsession. Our commitment to performance and durability is reflected in every product we create. Why Choose Spectre? With a rich history that includes setting world records—becoming the first wheel-driven, gasoline-powered car to exceed 400 mph—our journey from a two-car garage to a leader in the automotive aftermarket is nothing short of extraordinary. Our Cutting-Edge Technology We utilize state-of-the-art equipment to ensure our products meet the highest standards: Advanced chassis dynamometer for diagnostic and emissions testing Top-of-the-line Super-Flow flow bench for airflow, pressure, and velocity measurement Scientific laboratory-grade equipment for product development Product Categories Air Intake Systems Our air intakes are crafted from high-quality polished or powder-coated aluminum tubing, complete wi...
View Spectre Products