SPL 16-19 Cadillac ATS/CTS Rear Upper Camber Arms

Shop alignment components, camber kits, caster kits, and adjustable control arms at Black Ops Auto Works. Find vehicle-specific parts for correcting suspension alignment or preparing a performance setup, including toe links, adjustment cams, camber plates, and replacement mounts. Choose components based on your vehicle, suspension configuration, and measured alignment needs. Camber, Caster, and Toe Correction Camber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment. This collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster...

Choose Cadillac ATS parts by engine, body and drivetrain. Standard ATS and ATS-V applications need distinct induction, exhaust and chassis coverage. Powertrain and Body Identification Record engine, gearbox and coupe or sedan body before selecting intake or exhaust components. Shared ATS wording does not establish every engine’s connections or routing. The ATS-V uses a twin-turbo V6 application. Its engine components should not be transferred to another ATS powertrain without explicit manufacturer coverage. Chassis and Brake Equipment Suspension applications need exact body, rear-drive or AWD coverage, axle loads and damper equipment. Review electronic controls and original components retained by the kit. Choose brake pads and rotors by installed caliper, dimensions, material and axle. Match sensors and fitting hardware separately from compound choice. Choose Your Part Identify engine, body and gearbox. Separate ATS and ATS-V powertrain coverage. Record drivetrain and damper equipm...

Find Cadillac CTS parts by generation, engine and sedan, coupe or wagon body. Exterior protection and control accessories need exact production and interface coverage. Hood and Window Accessories Match hood protectors to actual front-end production and mounting. Window deflectors need exact body, door coverage and installation method. Compare the pieces supplied and follow the manufacturer’s instructions for the original window arrangement. A related CTS-V body or another generation should not be assumed compatible. Pedal Controls and Interior Fit Match pedal-response accessories to the actual accelerator connector and phone or display equipment. Response adjustment does not establish a verified engine-output gain. Floor mats need measured contours, retention and pedal clearance. For engine, brake and suspension parts, record the installed assemblies and distinguish standard CTS from CTS-V applications. Choose Your Part Identify generation, engine and body. Match hood and deflector...

Control arms for lifted trucks, SRT and Hellcat platforms, and off-road builds are stocked at Black Ops Auto Works. Shop tubular steel upper control arms, billet adjustable control arms, rear toe links, camber arm kits, and vehicle-specific control arm sets for Jeep Grand Cherokee and Trackhawk, Dodge Durango, Charger, Challenger, 300, and Magnum, Toyota 4Runner and FJ Cruiser, Lexus GX460 and GX470, Ford Mustang, and GM 1500 trucks. Every product is filterable by year, make, model, trim, and lift height so the correct control arm ships the first time. Black Ops Auto Works carries 789 control arm SKUs across upper, lower, adjustable, and toe link categories. What This Collection Covers Control arms connect the wheel hub and knuckle assembly to the vehicle frame and control wheel travel through compression and droop. Worn OEM control arms with loose ball joints or deteriorated bushings cause vague steering, uneven tire wear, and handling inconsistency. This collection covers arm ...

Shop SPL Parts suspension arms, caster rods, camber links, toe arms, traction links, sway bar endlinks, bushings, tie rods, and alignment hardware by exact manufacturer part number and vehicle application.Choose Your Part Match the complete SPL manufacturer part number Confirm year, make, model, mounting position, and suspension configuration Verify the adjustment function, range, threads, bearing interface, and included hardware Plan for professional installation, clearance checks, torque verification, and final alignment Precision Suspension SelectionSPL Parts components are designed around specific suspension geometry and mounting points. Confirm every engine, drivetrain, chassis and factory-equipment requirement in the product application notes. Always use the current manufacturer application and installation information for the exact part number.Related SPL Parts Products All SPL Parts products BMW caster rod bushings Toyota GR Supra and BMW Z4 caster bushings Nissan 350Z compr...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...