SPL Parts 06-15 Mazda Miata MX-5 Titanium Rear Upper Trailing Arms

Shop alignment components, camber kits, caster kits, and adjustable control arms at Black Ops Auto Works. Find vehicle-specific parts for correcting suspension alignment or preparing a performance setup, including toe links, adjustment cams, camber plates, and replacement mounts. Choose components based on your vehicle, suspension configuration, and measured alignment needs. Camber, Caster, and Toe Correction Camber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment. This collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster...

Control arms for lifted trucks, SRT and Hellcat platforms, and off-road builds are stocked at Black Ops Auto Works. Shop tubular steel upper control arms, billet adjustable control arms, rear toe links, camber arm kits, and vehicle-specific control arm sets for Jeep Grand Cherokee and Trackhawk, Dodge Durango, Charger, Challenger, 300, and Magnum, Toyota 4Runner and FJ Cruiser, Lexus GX460 and GX470, Ford Mustang, and GM 1500 trucks. Every product is filterable by year, make, model, trim, and lift height so the correct control arm ships the first time. Black Ops Auto Works carries 789 control arm SKUs across upper, lower, adjustable, and toe link categories. What This Collection Covers Control arms connect the wheel hub and knuckle assembly to the vehicle frame and control wheel travel through compression and droop. Worn OEM control arms with loose ball joints or deteriorated bushings cause vague steering, uneven tire wear, and handling inconsistency. This collection covers arm ...

Choose Mazda Miata gauge mounts and engine accessories by generation, interior layout and installed engine. A-pillar pods and crankshaft dampers have very different application requirements. Gauge Pods and Interior Mounting Compare the model-year range, pillar shape and gauge count. Single, dual and triple pods provide different arrangements; 52mm and 2-1/16-inch references still require the exact gauge and mount dimensions to agree. Review attachment instructions, wiring clearance and the interior safety equipment before installation. The pod is a mounting component and should not be assumed to include gauges or sensors. Crankshaft Damper Configuration For a 1.8L damper application, compare belt grooves, pulley alignment and the trigger-wheel arrangement. Options described with and without an OEM trigger wheel require separate selection. Confirm whether the stated belt guide is included and which existing components must be retained. An engine conversion needs review against the ac...

Explore Mazda MX-5 Miata intake, exhaust and brake options by generation and engine. Keep earlier 1.8L damper configurations separate from later 2.0L intake and chassis applications. Intake and Axle-Back Exhaust Choices Compare an intake’s exact year and engine coverage, heat-shield contents and sensor connections. Polished and black finishes should be compared only after the underlying part application is established. For a single-exit axle-back exhaust, check rear-section connections, outlet position, material and supplied hardware. Confirm clearance and compatibility with the existing exhaust and body configuration. Dampers and Brake-Service Details Damper selection depends on crankshaft application, belt grooves, pulley alignment and trigger-wheel configuration. A 1.8L damper reference is not a substitute for identifying a later 2.0L engine’s drive arrangement. Match rotor geometry and caliper package separately at each axle. For a brake hose, identify left/right and front/rear ...

Compare Mazda RX-8 intake and brake options using the exact rotary-engine configuration and fitted calipers. Evaluate engine-control accessories separately from airflow and friction components. Short-Ram Intake Selection Match the exact intake year and engine coverage, sensor provisions, tubing route and mounting hardware. Compare polished and wrinkle-black finishes only after confirming application and contents. For a modified engine or intake, provide existing components and engine-management changes. A replacement system must support the actual configuration rather than only the chassis designation. Pedal Controls and Race Brakes A throttle-control accessory needs the correct pedal connector, harness and manufacturer application. It should not be treated as an intake kit or an engine power calibration. For race pads, compare caliper, backing shape, axle and exact equipment coverage. Review compound operating guidance, rotor compatibility and the specified bedding procedure before...

Shop SPL Parts suspension arms, caster rods, camber links, toe arms, traction links, sway bar endlinks, bushings, tie rods, and alignment hardware by exact manufacturer part number and vehicle application.Choose Your Part Match the complete SPL manufacturer part number Confirm year, make, model, mounting position, and suspension configuration Verify the adjustment function, range, threads, bearing interface, and included hardware Plan for professional installation, clearance checks, torque verification, and final alignment Precision Suspension SelectionSPL Parts components are designed around specific suspension geometry and mounting points. Confirm every engine, drivetrain, chassis and factory-equipment requirement in the product application notes. Always use the current manufacturer application and installation information for the exact part number.Related SPL Parts Products All SPL Parts products BMW caster rod bushings Toyota GR Supra and BMW Z4 caster bushings Nissan 350Z compr...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...