Size Chart
×
Stainless Works 2016+ Chevy Camaro SS 3in Redline Factory Connect Axle Back w/Valve & 4in Quad Tips is a Stainless Works axle back identified by manufacturer part number CA16RVMKSFCR. It is built for exact exhaust-system compatibility, so connection style, dimensions, included components, emissions configuration, and vehicle application must be confirmed before ordering.
Key Features
Fitment
Verified year-make-model applications: 2016-2020 Chevrolet Camaro. Confirm engine, body style, emissions configuration, transmission, connection point, exhaust layout, and manufacturer part number before ordering. Those details remain application notes and are not placed in the model tag.
| Years | Make | Model |
|---|---|---|
| 2016-2020 | Chevrolet | Camaro |
Specifications
| Brand | Stainless Works |
|---|---|
| Manufacturer Part Number | CA16RVMKSFCR |
| Product Type | Axle Back |
| Tubing Diameter | 3 inches |
| Material | 304 stainless steel unless the exact product page states otherwise |
| Condition | New |
What's Included
One new Stainless Works axle back identified by manufacturer part number CA16RVMKSFCR. Gaskets, clamps, sensors, leads, adapters, tips, and other components are included only when expressly stated for this exact part number.
About Stainless Works
Stainless Works manufactures American-made stainless-steel headers, exhaust systems, tubing, mufflers, and fabrication components for performance automotive applications.
Related Stainless Works Products
Frequently Asked Questions
How do I confirm Stainless Works CA16RVMKSFCR fits?
Match the exact manufacturer part number, year, make, model, engine, body style, emissions configuration, connection point, tubing diameter, and complete exhaust layout.
Is Stainless Works CA16RVMKSFCR a complete exhaust system?
Only the components expressly listed for this exact part number are included. Headers, catalytic converters, leads, midpipes, mufflers, tips, clamps, and gaskets may be separate products.
Does Stainless Works CA16RVMKSFCR require professional installation?
Professional installation is recommended for vehicle-specific exhaust work. Verify legal use, clearances, oxygen-sensor placement, leak-free joints, and final alignment before operation.
Installation
Follow the current Stainless Works instructions for the exact part number. Work on a cool vehicle supported by approved equipment, test-fit every component, preserve required emissions equipment, align the system without preload, torque all hardware, reconnect sensors correctly, and inspect for leaks and clearance before driving.
Axle back exhaust systems for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop single and dual exit axle back systems, valved axle back exhausts, stainless steel and titanium tip options, black chrome and carbon fiber tips, and vehicle specific axle back kits for Corvette, Mustang, WRX, Miata, Corolla, Bronco, and Explorer platforms from MBRP, Borla, MagnaFlow, AWE Tuning, Corsa, and aFe. Every axle back system is filterable by year, make, model, trim, engine, and drivetrain so the correct diameter, tip style, and mounting hardware ships the first time. Black Ops Auto Works carries 611 axle back SKUs across single exit, dual exit, and valved categories. What This Collection Covers Axle back exhaust replaces everything from the rear axle back, typically the muffler, resonator if equipped, and exhaust tips, without touching the catalytic converter, mid pipe, or headers. It is the most common entry point into aftermarket exhaust because it focuse...
View Axle Back Products
Chevrolet Camaro parts and accessories for every generation are stocked at Black Ops Auto Works. Shop cold air intakes, headers, cat-back exhaust systems, catch cans, brake pads, brake rotors, big brake kits, sway bars, springs, carbon fiber hoods, splitters, decklids, louvers, clutch kits, and carbon fiber driveshafts for the 4th Gen F-Body, 5th Gen, and 6th Gen Camaro, including SS, ZL1, LT1, and RS trims. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,570 Chevrolet Camaro SKUs across intake, exhaust, brakes, suspension, exterior, and drivetrain categories. What This Collection Covers The Camaro has run through four modern generations on the LS and LT engine families, plus the earlier F-Body cars shared with the Pontiac Firebird. This collection groups parts confirmed to fit the specific Camaro generation and trim so LS-swapped classics, LT1 6th Gen SS cars, and supercharge...
View Chevrolet Camaro Parts & Accessories Products
Shop performance exhaust systems, cat-backs, axle-backs, headers, mufflers, and exhaust tips at Black Ops Auto Works. Compare options from Borla, CORSA, Solo Performance, AWE, MagnaFlow, MBRP, Kooks, Akrapovic, Invidia, and other brands. Find complete systems and individual components for muscle cars, performance SUVs, trucks, imports, and European vehicles. Cat-Back and Axle-Back Exhaust Systems Choose the exhaust section that matches your project. Cat-back systems generally replace the exhaust downstream of the catalytic converter, while axle-back systems replace the rear section. Exact connection points and package contents vary by vehicle. Compare muffler design, pipe diameter, exit location, tip configuration, and compatibility with existing exhaust components. Exhaust for HEMI, SRT, Trackhawk, and Hellcat Vehicles This collection includes exhaust options for selected Jeep Grand Cherokee SRT and Trackhawk, Dodge Durango SRT and Hellcat, Dodge Charger, Chrysler 300, and Ram appl...
View Exhaust Systems Products
Shop Stainless Works headers, cat-back systems, axle-back systems, downpipes, connection pipes, mufflers, tips, tubing, and fabrication components by exact manufacturer part number and verified application.Stainless Works Product Families Long-tube headers and connection leads Cat-back and axle-back exhaust systems Downpipes, midpipes, resonator deletes, and high-flow catalyst assemblies Universal stainless-steel tubing, mufflers, tips, flanges, clamps, and fabrication hardware Choosing the Correct SystemConfirm the exact year, make, model, engine, body style, emissions configuration, tubing diameter, factory or performance connection point, tip finish, and manufacturer part number. Engines, trims, and chassis codes remain application notes rather than model tags.About Stainless WorksStainless Works manufactures American-made stainless-steel exhaust systems, headers, mufflers, and fabrication components for performance automotive applications.Related Collections Stainless Works prod...
View Stainless Works Products