Superpro 05-11 Ford Focus LS/LT/LV Volvo S40/V50 and C70/18mm Front Lower Control Arm Assembly Kit

Shop alignment components, camber kits, caster kits, and adjustable control arms at Black Ops Auto Works. Find vehicle-specific parts for correcting suspension alignment or preparing a performance setup, including toe links, adjustment cams, camber plates, and replacement mounts. Choose components based on your vehicle, suspension configuration, and measured alignment needs. Camber, Caster, and Toe Correction Camber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment. This collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster...

Control arms for lifted trucks, SRT and Hellcat platforms, and off-road builds are stocked at Black Ops Auto Works. Shop tubular steel upper control arms, billet adjustable control arms, rear toe links, camber arm kits, and vehicle-specific control arm sets for Jeep Grand Cherokee and Trackhawk, Dodge Durango, Charger, Challenger, 300, and Magnum, Toyota 4Runner and FJ Cruiser, Lexus GX460 and GX470, Ford Mustang, and GM 1500 trucks. Every product is filterable by year, make, model, trim, and lift height so the correct control arm ships the first time. Black Ops Auto Works carries 789 control arm SKUs across upper, lower, adjustable, and toe link categories. What This Collection Covers Control arms connect the wheel hub and knuckle assembly to the vehicle frame and control wheel travel through compression and droop. Worn OEM control arms with loose ball joints or deteriorated bushings cause vague steering, uneven tire wear, and handling inconsistency. This collection covers arm ...

Find Ford Focus exhaust systems and conversion pieces by exact engine, trim and installed AWE system. Keep ST and RS applications and their distinct exhaust configurations explicit. Complete Exhaust or Conversion Package Identify Track, Touring or SwitchPath configuration and the actual installed system reference. A conversion kit changes a compatible system rather than supplying a complete exhaust automatically. Match exact Focus trim, production and engine coverage. Compare resonator, valve, tip and supporting installation contents for the selected package. Body Protection and Service Scope For hood protectors, preserve production range and grille/fascia mounting application. Different Focus body revisions should not be treated as one panel fit. Review installation instructions and the actual components supplied. Keep existing exhaust modifications and body changes with the application request. Choose Your Part Record year, engine and ST or RS trim. Identify installed exhaust con...

Shop SuperPro polyurethane suspension bushings, control arms, sway bars, end links, alignment components, spring isolators, differential mounts, and chassis service parts by exact manufacturer part number and verified vehicle application.SuperPro Product Families Polyurethane suspension and sway-bar bushings Control arms, ball joints, end links, and alignment components Sway bars, spring isolators, shock mounts, and chassis supports Differential, transmission, steering, and universal service components Choose Your PartConfirm the exact part number, year, make, model, mounting position, bar diameter, bushing dimensions, suspension configuration, and every manufacturer application note. Confirm every engine, drivetrain, chassis and factory-equipment requirement in the product application notes.About SuperProSuperPro engineers polyurethane suspension and chassis components for street, performance, and off-road vehicles, with application-specific designs and exact dimensional requiremen...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

Shop Volvo C30 intake and brake applications by production, engine and factory equipment. For T5 intake choices, confirm the complete turbo, sensor and air-path configuration before choosing a finish. T5 Intake Application The displayed Injen options name a 2007–2010 C30 T5 application. Verify the manufacturer part number and current year/engine coverage, including required sensors, hoses and mounting. Black and polished finishes should be compared after application and kit contents. A throttle, inlet or filter accessory is not automatically a complete intake system. Brakes and Rear Suspension Mounts Match pads and rotors to the installed caliper, dimensions and axle. Shared Focus or Mazda references still need exact C30 coverage. Choose street or competition compounds for actual use. Rear mounts require matching suspension geometry and hardware; a mount listing should not be treated as a complete shock assembly. Choose Your Part Identify production, T5/other engine and installed i...

Shop Volvo C70 brake applications by generation, body and installed calipers. Distinguish the earlier coupe/convertible from later convertible applications before choosing shared Volvo or Ford/Mazda components. Caliper Side and Generation A rear-left caliper naming 850/V70/C70/S70 requires its exact production and brake-package coverage. Do not extend it to every C70 generation. Match pad profile, rotor diameter/thickness and axle for each kit component. Shared model names do not substitute for identifying the installed caliper. Friction and Service Contents Choose HPS, HP+ or competition compounds for their intended conditions after confirming fit. Compare the exact pad specification and service needs. EBC kit series can combine different friction and rotor types. Review supplied rotors, pads and hardware and confirm both axles if ordering a multi-axle package. Choose Your Part Identify generation, coupe/convertible body and production. Match caliper side, pad profile and rotor di...

Find Volvo S40 intake and brake applications by generation, production and actual engine. Identify the current turbo, sensors and calipers before selecting shared-model components. T5 Intake Interfaces For a T5 intake, confirm the manufacturer part number against exact S40 production and engine. Match turbo connection, sensor arrangement, hoses and mounting. Choose black or polished finish after verifying application and full kit contents. A related C30 reference should not establish coverage for every S40 engine. Brake and Suspension Components Pads need the installed caliper, correct profile and axle; rotors need matching dimensions. Shared Ford/Mazda or motorsport headings require specific S40 support. Suspension mounts need correct position, geometry and hardware. Select friction for intended conditions, and keep mount packages distinct from complete damper assemblies. Choose Your Part Identify generation, production and actual engine. Match intake sensors, turbo interfaces and...

Shop Volvo V50 brake applications by production, engine and installed calipers. Identify factory or upgraded brake equipment before comparing shared Volvo, Ford or Mazda references. Front and Rear Pad Profiles Match caliper, pad shape, rotor dimensions and axle first. Focus ST and Mazdaspeed references require exact V50 coverage rather than platform similarity alone. Front and rear friction components serve separate assemblies. Check each part number when choosing a kit or ordering both axles. Street and Competition Service Kits Compare HPS, HP+ and DTC compounds for their intended conditions and operating range. A competition label does not establish better everyday suitability. EBC packages can use different compounds and rotor styles. Review hardware, rotors and supplied quantities so the package covers the planned service. Choose Your Part Identify production, engine and current brake package. Match each axle’s caliper, pad profile and rotor dimensions. Choose compound for actu...