SuperPro 2014 BMW 228i Base Rear Lower Inner Control Arm Bushing Kit

Shop BMW 228i parts for brake service, a chassis refresh or an ignition-maintenance plan at Black Ops Auto Works. Compare Brembo pads and rotors, Bilstein strut references, suspension bushings and Dinan wheel hardware or coils. Build the purchase around the exact Coupe or Convertible and the job you want to complete; use separate Gran Coupe coverage for the four-door model.Brembo Brake-Service ChoicesCompare ceramic and low-metallic pad listings, front rotor options and separate front or rear wear-sensor references for the installed brake assembly. Brembo’s ceramic range emphasizes comfort and reduced dust; select the approved compound around your road-use priorities and the exact brake application. Review kit contents and fitting hardware before arranging service.Struts, Bushings and Chassis SetupThe selection includes Bilstein strut references and SuperPro control-arm bushing listings, plus Eibach anti-roll-bar references for defined chassis projects. Decide whether the job is rep...

Shop BMW 228i xDrive parts for brake service, a suspension project or an ignition refresh at Black Ops Auto Works. Compare Brembo pads and rotors, ST X coilover references, Dinan wheel hardware and engine-service options. Start with the exact body and xDrive chassis so replacement parts and setup choices can be reviewed as one project.Brake Service with Brembo OptionsExplore ceramic and low-metallic pad references, conventional or Xtra front-rotor listings and separate front or rear wear-sensor applications. Match the installed caliper, rotor dimensions and axle before comparing suitable options. Review road-use characteristics and supplied hardware; an upgrade caliper needs a complete system application review rather than a color-based choice.xDrive Coilover and Damper ProjectsThe ST X listing names F20/F21/F22/F23 xDrive applications with axle-load restrictions to check. Review the exact body, factory damping and load requirements before comparing adjustment and mounting provision...

Shop BMW 230i parts for an intake project, ignition service or chassis refresh at Black Ops Auto Works. Compare generation-specific Dinan intake listings, Bilstein strut references, wheel spacers and brake-service options. Start with the change you want to make, then coordinate suitable components for the exact body and production range.Dinan Intake Choices by GenerationThe selection includes a carbon fiber intake listing for stated F22/F23 230i applications and separate PEX or carbon fiber choices naming the G42. Compare the correct generation’s housing material, filter-service requirements, connections and supplied components. Review the individual kit before deciding whether the project needs a complete intake or a service element for the existing system.Chassis Service and Setup DetailsBilstein B4 front-strut references provide replacement options to review against the installed suspension. Dinan rear toe-link and front strut-tower-brace listings name selected G42 applications f...

Plan BMW 230i xDrive brake service, an intake change or a suspension project with Black Ops Auto Works. Review Dinan intake and chassis listings, DFC brake references, wheel spacers and ignition options. Keep the actual generation and all-wheel-drive configuration in the plan so the selected parts work toward the same project goal.Intake and Ignition RequestsDinan PEX and carbon fiber intake listings name selected G42 230i applications. Confirm the exact xDrive and engine coverage before comparing housing material, filter access, connections and supplied pieces. For an ignition refresh, use the approved engine specification to review B-Series coil and plug references, including any tuning changes.Brake Pads, Rotors and Service HardwareThe selection includes a DFC 4000 HybriDynamic front-pad-and-hardware listing naming 230i xDrive applications, alongside other brake references. Match the installed axle, caliper and brake option, then compare exact package contents. Review wear sensor...

Explore BMW 320i induction, suspension and brake-service projects with Black Ops Auto Works. Compare a do88 intake reference naming G20/G21 B46/B48 320i applications, Bilstein struts, Brembo brake kits and sensors, plus Dinan wheel-hardware and styling options. Choose parts around your engine, chassis and the job you want to complete.do88 Intake and Engine-Service ChoicesThe do88 intake listing names BMW 320i/330e/330i B46/B48 G20/G21 applications. Review its complete engine and production coverage, supplied components and installation instructions against the car. Dinan ignition-coil and plug references address separate engine-service choices; use the prescribed specification and exact manufacturer application rather than choosing a plug heat range from a shared engine-family title.Bilstein Suspension and Chassis WorkFor a damper refresh, review the Bilstein B4 front-strut reference naming 2012–2013 320i applications, together with the correct axle, side and existing suspension equ...

Explore BMW 320i xDrive brake service and suspension projects with Black Ops Auto Works. Compare Brembo rear-rotor and disc-brake kit references naming xDrive applications, Bilstein suspension choices and SPL F3X xDrive caster-rod bushings. Dinan and aFe wheel-hardware references add options for a separately planned wheel setup.Brembo Brake-Service ReferencesThe Brembo rear-rotor listing names 2013–2018 320i xDrive applications, with a rear disc-brake kit reference also naming that model range. Front kits and wear sensors have their own coverage and quantities. Match the installed brake package and exact axle before assembling a service order, and review the kit contents before adding separate pads, sensors or hardware.Bilstein and SPL xDrive Chassis ChoicesThe selection includes a Bilstein B14 PSS kit for select xDrive models and a B4 front-left strut reference naming 320xi applications. SPL also lists F3X xDrive front caster-rod bushings. Start with a damper replacement, complete ...

Explore BMW 328d brake service and engine-project references with Black Ops Auto Works. Start with an EBC rear-rotor reference naming the F30 328D diesel, then review the actual brake assembly and service plan. King diesel bearing and body-specific accessory references provide separate starting points for defined rebuild or maintenance requests.EBC Rear-Rotor ServiceThe EBC RK Series Premium rear-rotor title names 2014+ F30 328D 2.0L TD applications. Compare exact production and brake coverage, dimensions and quantities before ordering. Other displayed rotors and kits include xDrive or different-model titles; review those independently rather than assuming one diesel model name confirms every brake assembly.King Diesel Bearing ReferenceThe King connecting-rod bearing listing names N47 D20 A/N47S D20 D engine references. Have the engine builder establish the actual engine, rod and crankshaft application and measured requirements before choosing a set. Review required size, clearances...

Explore BMW 328d xDrive damper replacement and brake-service projects with Black Ops Auto Works. Compare Bilstein DampTronic front-strut references naming 2014–2018 applications, Brembo rear-brake choices and EBC rear rotors. Select the service job around the suspension equipment and brake package currently installed.Bilstein DampTronic Strut ReferencesThe selection includes front-left DampTronic strut titles naming 2014–2018 BMW 328d xDrive applications. Match the actual electronic-damper equipment and complete manufacturer coverage before purchase. Review side, supplied components and any mounts or supporting hardware with the installer; a single left-strut listing should be reviewed separately from a full suspension kit.Brembo and EBC Rear-Brake ChoicesBrembo rear-rotor and rear disc-brake kit titles name specified 328d xDrive applications. EBC also lists GD Sport and RK Series Premium rear-rotor references naming the F30 diesel xDrive. Compare exact axle and caliper coverage, pa...

Explore BMW 328i GT xDrive brake-service and wheel-hardware projects with Black Ops Auto Works. Start with the Brembo rear disc-brake kit reference that explicitly names the GT xDrive, then compare the installed brake assembly and package contents. Request GT-specific coverage separately for suspension, ignition or mirror-styling work.Brembo Rear-Brake ServiceThe Brembo rear disc-brake kit title names 2014–2016 328i GT xDrive applications alongside other specific BMW models. Confirm complete axle and brake-package coverage before ordering, then review supplied pads, rotors and any additional hardware needed for the job. A shared 3 Series or xDrive title alone does not settle every GT application.Coordinate Wheel Spacers and BoltsDinan and aFe spacer references offer choices to review against the actual wheels, hubs and available clearance. Establish exact bolt pattern, center bore, seat, thread and required engagement before choosing the combination. Have the installer review cleara...

Explore BMW 328i exhaust, suspension, intake and brake-service projects with Black Ops Auto Works. Compare Dinan axleback references, Bilstein damper options, do88 intake-resonator components and DFC brake-service choices. The range spans several generations, so choose the project first and narrow every component to your car’s actual engine and chassis.Dinan Exhaust and do88 Intake ChoicesA Dinan Free Flow axleback title names 2012–2016 328i/428i F30/F31/F32/F33 applications with black tips, with a separate E36 axleback reference also displayed. Review body, production, existing system connections and contents for each exhaust purchase. The do88 resonator-delete references name specified E9X N51/N52/N53 applications and need their own exact intake-system match.Bilstein and Chassis Setup OptionsBilstein references include a B4 front-strut title naming 2012–2013 328i, a B4 rear-shock title naming the 2007 328i coupe and a B12 kit naming 2012–2015 328i applications. Compare the actual ...

Explore BMW 328i xDrive brake service, chassis work and exhaust projects with Black Ops Auto Works. Compare Brembo pad and rotor references, EBC brake kits and SPL xDrive caster-rod bushings. Dinan axleback and wheel-hardware references offer separate project choices to review against the exact generation, body and current equipment.Brembo and EBC Brake-Service ChoicesBrembo front-pad titles name specified 2009–2013 328i xDrive applications, with separate rear-rotor coverage. An EBC S20 kit title names 2013–2018 328i xDrive among its applications. Identify exact production and installed brake package, then compare the suitable pad, rotor and kit choices and required service quantities.SPL Chassis Components and Bilstein RequestsThe SPL F3X front caster-rod bushing reference explicitly names xDrive applications. Review the exact mounting and chassis coverage for that repair. For Bilstein B14 or individual strut references, confirm body, drivetrain and current damper equipment before ...

Explore BMW 330e intake, brake-service and damper-replacement projects with Black Ops Auto Works. Compare a do88 G20/G21 intake reference naming the 330e, Brembo front-pad choices and an EBC kit naming 2017–2018 applications. Keep the exact generation, drivetrain and installed equipment central to each part of the order.do88 Intake-System ReferenceThe do88 intake title names B46/B48 G20/G21 320i/330e/330i applications. Review complete engine and production coverage, connections, contents and installation requirements against the actual car. Other displayed cooling references name different engine or model families, so review those independently before adding them to the same project.Brembo and EBC Brake-Service ChoicesBrembo front-pad references name the 2020 BMW 330e in ceramic and low-metallic versions. An EBC S1 kit title names 2017–2018 330e/330i applications. Match the exact axle and installed brake package before comparing compounds, rotors and kit contents; the production ran...

Explore BMW 330i GT xDrive cooling-system and service-project references with Black Ops Auto Works. Start with the Dinan heat-exchanger title that includes F34 coverage, then request the exact engine and vehicle application. Brake, wheel-hardware and styling choices need their own GT-specific review before becoming part of the order.Dinan Heat-Exchanger ReferenceThe Dinan title names 2016–2020 330i/340i/430i/440i applications across listed F-chassis bodies, including F34. Review complete engine, body and drivetrain coverage, existing cooling-system connections, supplied components and installation requirements for your GT. A displayed B58 radiator or 430i intake title should be reviewed independently rather than treated as a matched GT package.Brake-Service Application RequestsEBC, Brembo and DFC references provide starting points for a brake-service inquiry, but many displayed titles name other bodies or models. Identify production details, installed brake package, axle and compone...

Explore BMW 330i intake, exhaust and chassis projects with Black Ops Auto Works. Compare Dinan PEX and carbon-fiber intake references, G20 valved axleback exhausts, do88 intake components and Bilstein suspension choices. The range spans different 330i generations, so organize the purchase around the engine, body and driving project you have in mind.Intake Choices from Dinan and do88For specified later G20 applications, Dinan lists PEX and carbon-fiber cold-air intake references, with separate coverage ranges in the titles. do88 also lists a B46/B48 G20/G21 intake system. Earlier references include an E46 M54B30 throttle-body hose and E9X resonator-delete components. Compare exact engine coverage, current intake hardware and supplied components before choosing a complete system or a single replacement part.Dinan Valved Axleback ExhaustsThe G20 330i valved axleback references are listed with black or polished tips and named 2019–2026 coverage. Compare the intended appearance, full app...

Explore BMW 330i xDrive intake, exhaust and suspension projects with Black Ops Auto Works. Compare Dinan intake and valved axleback references, H&R coilovers naming specified non-adaptive xDrive applications and DFC brake-service choices. Build each part of the project around your exact production, body and installed equipment.Dinan Intake and Exhaust ReferencesDinan lists PEX and carbon-fiber intake references for specified G20 330i production ranges, plus valved axleback choices with black or polished tips. Establish exact xDrive engine and body coverage for each system, then compare the desired finish, supplied components and installation requirements. Review heat-exchanger and other cooling references independently rather than assuming a complete matched package.H&R Coilovers and Dinan Chassis ComponentsThe H&R Street Performance coilover title names 2019–2022 330i xDrive sedans and specifically excludes adaptive suspension. Confirm the installed damper equipment bef...

Plan BMW 335i GT xDrive brake service, ignition maintenance or a wheel-hardware project with Black Ops Auto Works. Review the listed Brembo, PowerStop and Dinan references against the actual GT body and installed assemblies. A focused application request helps turn the wider 3 Series selection into a defined service order.Brake-Service Requests for the GTThe displayed Brembo pad, PowerStop pad and other brake references include titles naming different 3 Series or related models. Establish explicit GT xDrive coverage using the exact year, axle and installed caliper or rotor references. Compare the suitable compounds and package contents after identifying the correct brake assembly.Dinan Ignition and Mirror ReferencesDinan N-series-style coils and spark-plug references require the actual engine and prescribed service specification. Choose plug application and heat range from the approved engine requirements rather than a family title alone. The separate carbon-fiber mirror-cover set a...

Explore BMW 335i cooling, intake, exhaust and clutch projects with Black Ops Auto Works. Compare do88 radiator and intercooler references, Dinan carbon-fiber intake and axleback choices, and ACT or SPEC clutch kits. Select the exact generation, engine and gearbox first so the parts list follows the build you are planning.do88 Cooling-System Project ChoicesThe do88 selection includes separate manual- and automatic-radiator references for specified E8X/E9X N54/N55 applications, an intercooler and an N54 BigPack intercooler-kit reference. Compare the actual transmission, engine and current cooling or charge-air connections before choosing a single component or kit. Review contents and mounting requirements with the installer.Dinan Intake and Axleback ReferencesA Dinan carbon-fiber intake reference names specified 2012–2018 BMW applications including the 335i. Separate axleback references address selected later 335i/435i applications and an earlier E90 335i/335xi range. Choose the exact...

Explore BMW 335i xDrive clutch projects, chassis work and brake-service references with Black Ops Auto Works. Compare ACT Mod-Twin kit configurations, SPL F3X xDrive caster-rod bushings and separate brake or ignition-service choices. Plan each job around the exact generation, engine, gearbox and installed assemblies.ACT Clutch ConfigurationsThe ACT selection distinguishes N54 eight-bolt and N54/N55 six-bolt Mod-Twin references, with rigid and sprung street configurations. Have the workshop identify the actual engine and crankshaft arrangement, transmission and required flywheel application before comparing kits. Review exact xDrive coverage, supplied components and intended-use requirements as a complete drivetrain project.SPL Chassis and Suspension RequestsThe F3X caster-rod bushing title explicitly names xDrive applications. Review exact mounting coverage and installation requirements for that repair. Bilstein kit and strut references and Dinan spring titles need their own drivetr...

Explore BMW 340i GT xDrive intake and cooling projects with Black Ops Auto Works. Compare Dinan semi-open intake and heat-exchanger references that include F34 in their named applications, alongside turbo-inlet and CSF cooling references for separate review. Establish exact GT engine and installation coverage before combining components.Dinan Intake and Turbo-Inlet ReferencesThe semi-open intake title names specified 2016–2021 M240i/340i/440i F-chassis applications including F34. Review full engine, production and drivetrain coverage and the installed intake system. The turbo-inlet reference has its own complete application and connections; compare it independently before treating it as part of the same installation.Heat-Exchanger and CSF Cooling ProjectsDinan lists a 2016–2020 heat-exchanger reference including F34 among its chassis applications. CSF radiator, auxiliary-radiator and charge-air-cooler-manifold references address different cooling components. Match the actual engine ...

Explore BMW 340i intake, cooling and manual-clutch projects with Black Ops Auto Works. Compare do88 B58 Gen 1 intake and charge-cooler references, Dinan intake components and heat exchangers, CSF cooling options and ACT Mod-Twin kits. Choose a defined system change and match each component to the engine and drivetrain on your car.do88 and Dinan Intake ChoicesThe do88 selection includes a B58 Gen 1 intake-system reference naming the 340i and a separate replacement-filter reference. Confirm whether the job is a complete intake installation or service of the system already fitted. Dinan semi-open intake and turbo-inlet references offer separate choices to review by exact engine, production and body coverage. Compare connections and package contents before combining parts.Cooling Components by Systemdo88 charge-cooler manifold, Dinan heat-exchanger and CSF radiator references address different cooling components. Review the actual B58 generation and existing system, then establish conne...

Explore BMW 340i xDrive intake, cooling and chassis projects with Black Ops Auto Works. Compare Dinan semi-open intake and turbo-inlet references, Dinan or CSF cooling components and SPL xDrive caster-rod bushings. ACT clutch configurations provide separate manual-transmission project choices after exact drivetrain coverage is confirmed.Intake and Cooling Project ReferencesDinan intake, turbo-inlet and heat-exchanger titles name specified 340i F-chassis applications, while CSF lists separate radiator references. Establish exact engine, body and xDrive coverage before selecting components. Review the actual intake or cooling system, connections and supplied parts with the installer; each reference serves its own project scope.ACT Clutch ConfigurationsThe B58 Mod-Twin range includes HD and XT references with different rigid, sprung, street and race configurations. Match the actual manual gearbox and engine assembly and review exact xDrive coverage before comparing intended use and kit...

Shop BMW 428i Gran Coupe parts for brake maintenance, cabin protection and exterior details at Black Ops Auto Works. Explore brake rotors and pad options alongside 3D MAXpider Kagu floor mats and Dinan carbon fiber mirror covers. Build the purchase around your F36 body, drivetrain and the equipment you want to service or update.Plan Your Brake ServiceCompare the listed DFC rotor and Brembo or EBC brake options around the actual brake assembly on your Gran Coupe. Choose the axle being serviced, then match caliper type, pad shape and rotor dimensions before selecting a pad compound or a combined kit. Check package contents so hardware and the parts needed for the job are accounted for.F36 Floor Mats and Carbon Fiber Mirror CoversThe 3D MAXpider Kagu full-set listing specifically names the F36 rear-wheel-drive Gran Coupe. Confirm your drivetrain and floor layout before choosing it. Dinan mirror covers list F36 among their body applications; compare your mirror housing and the supplied ...

Build your BMW 428i project around exhaust, brakes, chassis parts and exterior styling at Black Ops Auto Works. Explore a Dinan Free Flow axle-back with black tips, brake-service options and an Eibach rear anti-roll bar. For a Coupe styling project, compare the listed APR Performance F32 adjustable wing with your exact body and installation plans.Dinan Free Flow Axle-Back ExhaustThe listed Dinan axle-back names 2012–2016 328i/428i applications including F32 and F33 bodies. Compare the complete production, engine and body coverage with your car, then review the black-tip finish, connection requirements and supplied components. Include any changes to the existing exhaust when planning the installation.Brake and Rear Sway Bar ChoicesBrembo ceramic pad and EBC pad-and-rotor options provide starting points for brake service; match them to the installed calipers and axle dimensions. The Eibach rear anti-roll bar listing names 2014–2016 428i applications. Review exact suspension coverage, ...

Explore BMW 428i xDrive Gran Coupe parts for wheel details, exterior styling and brake or chassis service at Black Ops Auto Works. Compare Dinan carbon fiber mirror covers and wheel hardware alongside the listed brake and suspension options. Select each component for the F36 Gran Coupe and its actual xDrive equipment.Wheel Spacers, Bolts and Finishing DetailsCompare Dinan spacer thicknesses and the listed H&R spacer option against your wheel and hub measurements. Review center bore, bolt pattern, seat type and bolt engagement as a complete installation. Similar nominal dimensions do not replace an application check, especially with aftermarket wheels or an existing spacer setup.Carbon Fiber Mirror Cover StylingThe Dinan mirror-cover set lists F36 among its BMW body applications. Match the current mirror housing and review the product photographs and installation method before choosing the set. Identify replacement mirrors or previous exterior changes when requesting help with th...

Shop BMW 428i xDrive parts for an exhaust update, suspension project or brake service at Black Ops Auto Works. Compare Dinan axle-back options with black tips, Bilstein suspension components and H&R sport springs for the listed F33 Cabrio application. Mirror covers and wheel hardware add separate styling choices for your 4 Series.Exhaust and Exterior DetailsThe Dinan Free Flow axle-back names 428i F32/F33 applications. Review full xDrive, engine and body coverage, current exhaust connections and supplied components before selecting the black-tip system. Dinan carbon fiber mirror covers and the APR F32 adjustable wing are separate exterior choices with their own body and mounting requirements.Choose Your xDrive Suspension SetupCompare Bilstein B4 replacement struts with the B14 suspension-kit option around the service or setup change you want. Match exact body, damper equipment and xDrive coverage, including left/right position where specified. The H&R sport spring listing na...

Shop BMW 430i Gran Coupe parts for intake, cooling, brake and chassis projects at Black Ops Auto Works. Explore Dinan cold air intakes, a heat-exchanger option and brake-service components, with separate applications for earlier and later Gran Coupe bodies. Wheel hardware, mirror covers and F36 floor mats add choices for the rest of your build.Choose Your Dinan Intake and Cooling PartsThe selection includes earlier 430i intake options alongside PEX and carbon fiber intake listings naming G26 among later applications. Compare the complete engine, emissions and production coverage before choosing the housing or finish you prefer. A turbo inlet pipe, replacement filter and the listed F36-family heat exchanger are separate purchases with their own connections and application requirements.Brake Service and Chassis UpdatesDFC pad and rotor listings include 430i Gran Coupe references; choose around the installed caliper, rotor dimensions and axle being serviced. For a chassis project, comp...

Explore BMW 430i parts for an intake or exhaust update, brake service and chassis work at Black Ops Auto Works. Compare Dinan cold air intakes, valved axle-back systems and suspension components for different 4 Series applications. Choose by your build goal, then match the generation, body and engine before ordering.Cold Air Intakes, Inlet Pipes and CoolingCompare Dinan carbon fiber and PEX intake options for the exact earlier or later 430i application. Review the housing, filter and connecting parts included with the selected system. A turbo inlet pipe or replacement air filter is a separate component; use the installed intake and engine requirements when choosing it. The listed heat exchanger also needs its own body and cooling-system match.Valved Axle-Back Exhaust and Tip FinishThe Dinan valved axle-back options name G22 430i applications and offer black or polished tips. Compare the finish you want after establishing complete body, production and engine coverage. Review valve op...

Shop BMW 430i xDrive Gran Coupe parts for intake, cooling, chassis and brake projects at Black Ops Auto Works. Compare Dinan PEX or carbon fiber intake options, wheel hardware and a later xDrive sway-bar set. Choose components for your Gran Coupe generation and installed equipment so the purchase suits the build you are planning.Intake Materials and Cooling ComponentsDinan intake listings include earlier 430i applications and later G26-family PEX and carbon fiber options. Establish complete engine, emissions and body coverage, then compare the housing and components you prefer. Review a turbo inlet pipe or service filter separately from a complete intake. The F36-family heat exchanger needs its own cooling-system and xDrive application check.xDrive Gran Coupe Chassis ChoicesThe Dinan adjustable front-and-rear sway-bar set explicitly names xDrive G22/G23/G26 applications. Compare its full production coverage, supplied hardware and setup requirements with your suspension. Front tensio...

Build your BMW 430i xDrive project with intake, exhaust, brake and chassis options from Black Ops Auto Works. Compare Dinan cold air intakes and valved axle-back systems, then explore suspension choices for the actual body and damper equipment. Wheel spacers and mirror covers offer separate finishing details.Dinan Intake and Exhaust ChoicesChoose an applicable PEX or carbon fiber intake after matching engine, emissions equipment and body generation. The Dinan G22 valved axle-back listings offer black or polished tips; confirm complete xDrive and body coverage before choosing the finish. Review inlet pipes, service filters and heat exchangers as separate components with their own connections and installation requirements.Suspension for Your xDrive CoupeThe H&R Street Performance coilover listing specifies 2021–2022 430i xDrive Coupe coverage without adaptive suspension. Compare that application with your car before choosing the kit. Dinan adjustable xDrive sway bars and rear toe ...

Explore BMW 435i Gran Coupe parts for charge-pipe work, brake service and interior or exterior details at Black Ops Auto Works. Compare the listed Mishimoto N55 charge pipe with your engine setup, then browse F36 Kagu floor mats, Dinan mirror covers and wheel hardware. Choose the parts around the work you want to complete on your Gran Coupe.Mishimoto Charge Pipe and Ignition ServiceThe Mishimoto charge-pipe listing names N55 F2X/F3X 335i/435i applications. Confirm exact Gran Coupe coverage and compare connections with the installed charge-air components before ordering. Dinan N-series coils and the listed heat-range-specific plug need their own engine and specification match; choose service parts for the actual setup.F36 Cabin Protection and Mirror StylingCompare the 3D MAXpider Kagu full-set listing for F36 rear-wheel drive with the separate first-row mat option. Decide which seating rows you need, then match drivetrain and floor layout. Dinan carbon fiber mirror covers list F36 co...

Build your BMW 435i project with intake, exhaust, brake and exterior options from Black Ops Auto Works. Explore the Dinan carbon fiber cold air intake and Free Flow axle-back, then compare APR front splitter styling and Dinan mirror covers. Choose each component for the exact body, engine and production application.Dinan Carbon Fiber Intake and Free Flow ExhaustThe Dinan D760-0038 intake and D660-0045-BLK axle-back listings both name 435i applications. Compare the full body, engine and production coverage for each system, then review the supplied components and current intake or exhaust connections. If either assembly has already been modified, include those parts in the installation review.APR Splitter and Carbon Fiber Mirror CoversThe APR front splitter listing names a stock-bumper 435i application. Match the actual bumper and mounting requirements before selecting it, particularly on a car with an M-style or aftermarket front end. Dinan mirror covers have separate body and housin...

Shop BMW 435i xDrive Gran Coupe parts for brake maintenance, suspension work and exterior details at Black Ops Auto Works. Compare Hawk HPS 5.0 rear pads, EBC pad-and-rotor kits and Bilstein suspension options, then explore Dinan mirror covers and wheel hardware. Select each application for the F36 body and actual xDrive equipment.Choose Your Brake-Service PackageThe Hawk HPS 5.0 rear-pad listing names 435i/435i xDrive applications, while EBC kit options offer separate pad-and-rotor packages. Match the complete Gran Coupe application, caliper and axle dimensions before choosing a compound. Review the existing rotors and supplied hardware so the purchase covers the planned service.Suspension Work for the xDrive Gran CoupeCompare the Bilstein B4 and B14 options with exact body, damper and drivetrain coverage. A kit and an individual strut have different contents and installation requirements. The displayed H&R front sway bar is titled for F33 Cabrio, so require explicit F36 covera...

Explore BMW 435i xDrive parts for brake service, suspension projects and wheel styling at Black Ops Auto Works. Compare Hawk rear pads, EBC brake kits and Bilstein components alongside H&R spring and front sway-bar options for the listed F33 Cabrio application. Dinan mirror covers and wheel hardware add finishing choices for your 4 Series.H&R Cabrio Springs and Front Sway BarThe displayed H&R sport springs and adjustable front sway bar name 435i xDrive Cabrio F33 applications. Confirm full production, axle-load and suspension coverage before selecting them. Review the current dampers, required hardware and setup work with your installer. A Cabrio application should not be carried over to another body without explicit coverage.Bilstein Suspension and Brake-Service ChoicesCompare the Bilstein B4 strut and B14 kit options against your body and actual damper equipment. For brake maintenance, the Hawk HPS 5.0 rear pads and EBC kit options need the installed caliper and axle d...

Shop BMW 440i Gran Coupe parts for an intake or cooling project, brake service and cabin protection at Black Ops Auto Works. Explore the Dinan semi-open cold air intake, turbo inlet pipe and heat exchanger alongside F36 Kagu floor mats and wheel hardware. Choose each component for the exact Gran Coupe and the equipment already installed.Dinan Intake, Inlet Pipe and Heat ExchangerThe semi-open Dinan intake lists F36 among its 440i body applications, while the inlet pipe and heat exchanger are separate components. Compare full engine and production coverage, supplied connections and the current intake or cooling setup. Review all three purchases individually when planning a combined project so adapters or supporting parts are accounted for.Kagu Mats for Your CabinCompare the 3D MAXpider F36 rear-wheel-drive full set with the separate first-row mat listing. Choose the rows you want to cover, then confirm the floor layout and drivetrain application. Check product photographs and package...

Explore BMW 440i parts for an induction, cooling or suspension project at Black Ops Auto Works. Compare do88 B58 Gen 1 intake options with Dinan semi-open induction, then review turbo inlet pipes, service filters and the listed heat exchanger. AST spring options and wheel hardware offer separate choices for your chassis setup.Compare do88 and Dinan Intake OptionsThe do88 intake listing names B58 Gen 1 F3X applications, while the Dinan semi-open system names 440i among its body applications. Match the full engine, body and production coverage before comparing housing layout and supplied components. Choose a replacement filter for its intended installed system; the shared 440i model name does not make service filters interchangeable.Turbo Inlet and Cooling Project PartsDinan turbo inlet pipes and the heat exchanger are separate purchases from a complete intake. Review the connections, package contents and full cooling or induction application for each. Include the parts already instal...

Shop BMW 440i xDrive Gran Coupe parts for induction, cooling, brake service and wheel details at Black Ops Auto Works. Compare the Dinan semi-open cold air intake, turbo inlet pipe and heat exchanger with your current engine setup. Review Bilstein suspension options and brake components separately for the F36 body and xDrive equipment.Dinan Induction and Cooling ChoicesThe semi-open intake names F36 among its 440i body applications. Confirm full engine, production and xDrive coverage, then compare connections and supplied components with the installed system. Treat the inlet pipe and heat exchanger as separate applications when planning a combined purchase, including any existing intake or cooling modifications.Suspension and Brake-Service PlanningCompare the Bilstein B4 strut and B14 kit options with exact Gran Coupe, xDrive and damper coverage. The displayed F33 Cabrio sway-bar title does not establish F36 fitment. Brake pads and rotors likewise need the actual caliper and axle di...

Explore BMW 440i xDrive parts for induction, cooling, brake maintenance and wheel styling at Black Ops Auto Works. Compare Dinan semi-open intake and turbo inlet options with the listed heat exchanger, then review suspension components for your body and damper equipment. Kagu first-row mats and wheel hardware offer additional finishing choices.Semi-Open Intake and Cooling ComponentsThe Dinan intake lists 440i F32/F33/F36 among its applications. Confirm complete engine, production and xDrive coverage before selecting the system. Review the turbo inlet pipe and heat exchanger separately for their connections and supplied parts. If the car already has induction or cooling changes, include that hardware when planning the next purchase.Suspension and Brake Work for Your BodyCompare Bilstein B4 struts and the B14 kit option against exact xDrive, body and damper coverage. The displayed H&R spring and sway-bar titles name 435i xDrive Cabrio applications; those titles alone do not establ...

Shop BMW hybrid and electric vehicle parts for a defined service or upgrade project at Black Ops Auto Works. Explore M5 exhaust and suspension choices, 330e intake or strut references, i4 brake-service listings and i5 interior protection. Start with the exact model and powertrain to narrow the wider selection.Performance Choices for Specific Hybrid ModelsThe reviewed range includes Akrapovic and AWE G90/G99 M5 exhaust references and a do88 G20/G21 330e intake application. Compare complete system contents and supporting requirements within the exact application. Combustion-engine upgrades are separate from battery-electric vehicle parts.Suspension and Brake MaintenanceBilstein strut references distinguish vehicle coverage, side and factory suspension equipment. Brake pads, rotors and sensors have their own axle and assembly applications. Select the correct service component before comparing compound, damper range or package contents.Interior Protection and Wheel DetailsReview the Cov...

Explore BMW M2 parts and accessories for exhaust, intake, cooling, brake and exterior projects at Black Ops Auto Works. Compare Akrapovic, Dinan, do88 and other listed options across M2 applications. Choose your exact generation and engine before planning the combination for your build.Exhaust and Intake Options by GenerationThe listed Dinan exhaust applications distinguish the F87 from the G87, while the Akrapovic G87 Slip-On listing requires tips. Compare system contents and finishing pieces together. Intake and ignition choices also name different engine families, so match the exact reference to your engine and current setup.do88 Cooling and Airflow ComponentsThe do88 selection distinguishes earlier M2 applications, F87 Competition applications and G87 S58 applications. Compare the appropriate radiator, intercooler, charge pipe or cooler for the system being changed. Review supplied hoses, fittings and required companion parts when combining components.Brake Service and Finishing...

Shop BMW M235i parts and accessories for intake, exhaust, brake, suspension and drivetrain projects at Black Ops Auto Works. Review the Dinan carbon-fiber intake and F22 resonator-delete applications, then compare service components and suspension choices for your exact vehicle.Dinan Intake and Exhaust DetailsThe Dinan intake listing names the M235i within its stated application range, while the resonator-delete listing specifies the 2014–2016 F22. Match body, engine and current exhaust layout before choosing the reference. Review mounting pieces and installation scope with your installer.Brakes, Suspension and Wheel HardwareCompare applicable pads, rotors and calipers from the listed brake brands against the installed assembly and axle. Suspension applications distinguish body, drivetrain and factory equipment, including electronic damping requirements. Choose spacers or fasteners from actual wheel and hub dimensions and measured clearance.Clutch and Service ComponentsACT and SPEC ...

Explore BMW M235i xDrive parts for brake maintenance, suspension projects and wheel details at Black Ops Auto Works. Compare applicable brake-service components, the ST X xDrive coilover application and Dinan accessories. Match your chassis and body before choosing parts for the project.Brakes for Maintenance and ReplacementCompare applicable DFC, Brembo and PowerStop components against the installed brake package and correct axle. Review pad compound, rotor dimensions and caliper coverage together. Include the required sensor or service hardware when planning the order.ST X Coilovers and Suspension DetailsThe listed ST X kit names F20/F21/F22/F23 xDrive applications and calls for axle-load checks. Match exact chassis, body, factory damping equipment and axle ratings before selecting it. Separate strut, bushing or arm listings require their own complete vehicle coverage and installation review.Dinan and Wheel-Project ChoicesReview the F22 Dinan resonator-delete application against y...

Shop BMW M240i parts and accessories for exhaust, intake, cooling and brake projects at Black Ops Auto Works. Compare AWE exhaust choices, Dinan airflow components and do88 cooling applications. Choose your exact generation and drivetrain to build a coordinated order.AWE and Dinan Exhaust ChoicesAWE G42 listings offer Touring and Track editions with different tip options, including references that retain OE tips. Dinan also lists valved axle-back applications. Compare the exact configuration, supplied tips, installation requirements and intended use before choosing the system for your car.Intake and Cooling by ApplicationDinan and do88 listings distinguish earlier M240i applications from G42 applications and different B58 generations. Select the intake, turbo inlet, charge-cooler manifold or cooler for the exact engine and system being changed. Review supplied components and required companion parts when planning a combination.Brakes, Chassis and Drivetrain PartsCompare applicable b...

Explore BMW M240i xDrive parts for exhaust, intake, suspension and brake projects at Black Ops Auto Works. Compare AWE and Dinan exhaust choices, Dinan airflow components and the G42 xDrive performance-spring application. Match generation and factory equipment before building the order.Exhaust and Intake OptionsThe listed Dinan G42 axle-back application names M240i and M240i xDrive, while AWE offers separate G42 Touring and Track configurations with tip choices. Match complete drivetrain and production coverage for the exact reference. Intake and turbo-inlet options distinguish chassis and engine applications; review supplied components with the planned installation.Springs and Chassis DetailsDinan lists a 2022–2026 G42 M240i xDrive performance-spring set. The ST X listing names earlier F20/F21/F22/F23 xDrive applications and axle-load requirements. Compare each option only within its stated chassis and equipment coverage, then review installation and alignment needs with your insta...

Polyurethane and rubber bushing kits are stocked at Black Ops Auto Works for control arms, sway bars, motor mounts, and rack and pinion mounts across trucks, SUVs, sport compacts, and classic muscle cars. Shop control arm bushing kits, master suspension sets, motor mount inserts, and steering rack bushings for Toyota, Lexus, Ford, Chevrolet, Honda, Subaru, Dodge, BMW, Mazda, and Jeep platforms. Every product is filterable by year, make, model, trim, and drivetrain so the correct bushing kit ships the first time. Black Ops Auto Works carries 2,625 bushing kit SKUs from leading suspension brands. What This Collection Covers Bushing kits replace worn rubber or upgrade to firmer polyurethane at critical suspension and drivetrain pivot points, tightening handling response and eliminating clunks and play caused by degraded factory rubber. Kit Categories Control arm bushing kits, master suspension bushing sets, motor and transmission mount inserts, sway bar and end link bushings, steer...

Shop suspension bushings, bushing kits, and full vehicle bushing kits from Energy Suspension, Prothane, Whiteline, Powerflex, SuperPro, Daystar, Moog, Mevotech, Nolathane, PST, Rare Parts, Whiteline KCA, and Black Ops Auto Works. Find polyurethane bushings, spherical bushings, replacement rubber bushings, control arm bushings, sway bar bushings, differential bushings, subframe bushings, transmission mount bushings, engine mount inserts, body mount bushings, and complete vehicle bushing kits for cars, trucks, SUVs, Jeeps, and off-road builds. Replace worn factory rubber bushings with polyurethane or spherical bushings to reduce deflection, sharpen handling, and extend service life. Shop by vehicle year, make, model, trim, subassembly (control arm, sway bar, differential, subframe), and material (polyurethane, spherical, replacement rubber). Suspension bushings are the small polyurethane, rubber, or spherical inserts that isolate suspension components from the chassis and from eac...

Shop hybrid and electric vehicle parts and accessories at Black Ops Auto Works by exact vehicle application and manufacturer part number. Compare suspension components, brake-service parts, floor and cargo liners, lighting, exterior accessories and utility products for the vehicle configurations listed on each product page. Shop by Hybrid and Electric Vehicle AcuraAcura ILX Hybrid · Acura MDX Hybrid · Acura NSX Hybrid · Acura RLX Hybrid · Acura ZDX Electric Alfa RomeoAlfa Romeo Tonale Hybrid & Plug-in Hybrid AudiAudi A3 Sportback e-tron · Audi A8 Quattro Hybrid · Audi Q4 e-tron · Audi Q4 e-tron Sportback · Audi Q5 PHEV · Audi Q6 e-tron · Audi Q8 e-tron · Audi Q8 e-tron Sportback · Audi RS e-tron GT · Audi RS e-tron GT Performance · Audi S e-tron GT · Audi SQ6 e-tron · Audi SQ8 e-tron · Audi SQ8 e-tron Sportback · Audi e-tron GT · Audi e-tron Quattro · Audi e-tron S · Audi e-tron S Sportback · Audi e-tron Sportback BMWBMW 330e · BMW 330e xDrive · BMW 530e · BMW 530e xDrive...

Shop SuperPro chassis parts for bushing repairs, control-arm service and sway-bar projects at Black Ops Auto Works. Compare individual mount bushings, arm assemblies, links and application-specific suspension kits. Choose the component around your actual chassis, repair position and alignment goals.Bushings by Component and PositionControl-arm, differential, subframe and spring bushings serve different mounting points. Match front or rear, inner or outer and forward or rearward positions to the assembly being repaired. Sway-bar mount choices also require the actual bar diameter and correct mounting profile.Control Arms and Geometry ChoicesCompare complete arms with individual bushing kits, then review supplied ball joints or mounts. Fixed-offset and adjustable references have different geometry and installation requirements. Caster, camber and anti-lift project choices need exact chassis coverage and a plan for alignment after installation.Sway Bars, Links and Supporting ComponentsC...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...