Click to zoom in
SKU: TRC6750 / UPC: 9317745801429
SuperPro Fixed Offset Front Upper Control Arm Set for 2024+ Ford Ranger
The SuperPro Fixed Offset Front Upper Control Arm Set, engineered specifically for vehicles lifted 2 to 3 inches (50mm to 75mm). This complete kit delivers built-in caster and camber corrections adding 2.5 to 3.5 degrees of caster and up to 1.5 degrees of negative camber based on a 50mm lift ensuring proper wheel geometry right out of the box. For off-road enthusiasts and daily drivers alike, these arms restore factory-like handling while enhancing durability on rugged trails, making them the go-to solution for maintaining tire contact and reducing uneven wear on lifted Rangers.
Exact Vehicle Fitment
- Year: 2024 and newer
- Make: Ford
- Model: Ranger (all trims including XL, XLT, Lariat, and Raptor equivalents)
Additional Notes: Designed for models with aluminum steering knuckles, direct bolt-on installation for 2-3 inch suspension lifts. Compatible with Ford Ranger platforms shared with select international models like Everest and VW Amarok, but verify your specific build for seamless fit.
What's Included in Your Purchase
This TRC6750 kit provides everything needed for a straightforward front suspension upgrade:
- 2x Fixed Offset Upper Control Arms: Pre-assembled with robot-welded high-strength steel forgings and tube steel construction for maximum rigidity and longevity.
- 2x Heavy-Duty High-Articulation Ball Joints: Uprated design allows greater suspension flex without binding, ideal for off-road articulation.
- SuperPro Polyurethane Bushings: Set of durable, chemical-resistant bushings that minimize arm movement and outlast rubber alternatives in harsh conditions.
- All Necessary Hardware: Mounting bolts, nuts, and washers for direct installation—no additional parts required.
Part Number: TRC6750
UPC: 9317745801429
Key Specifications and Construction
- Type: Front Upper Control Arms (Fixed Offset Geometry)
- Lift Compatibility: 50-75mm (2-3 inches)
- Alignment Corrections: +2.5° to +3.5° caster, -1.5° camber (at 50mm lift)
- Materials: High-strength steel forgings, tube steel arms, polyurethane bushings (abrasion- and wear-resistant)
- Additional Design Features: Increased clearance for coil-over struts; enhanced arm articulation for better terrain compliance
- Warranty: 3 years against manufacturing defects
Proven Performance on and Off the Road
Drivers report sharper steering response and increased straight-line stability with the TRC6750, thanks to its fixed offset design that eliminates guesswork in alignment setup. On pavement, expect improved turn-in precision and cornering predictability, while off-road, the high-articulation ball joints and resilient bushings handle impacts without compromising control. This setup reduces tire wear by maintaining optimal contact patch, extends component life under heavy use, and keeps your Ranger responsive during long hauls or aggressive trails proving why it's the preferred choice for lifted truck owners seeking reliable, no-fuss performance.
Ready to transform your 2024+ Ford Ranger? Add the SuperPro TRC6750 to your cart today for fast shipping and expert support. Search no further this kit sets the standard for front upper control arms in the lifted Ranger community.
Alignment Components
Shop alignment components at Black Ops Auto Works for premium camber kits, caster kits, control arms, toe links, shock mounts, camber plates, and suspension alignment parts designed to improve handling, tire wear, steering response, and suspension geometry. Whether you are dialing in a street car, correcting alignment after lowering your vehicle, or building a track-ready or off-road setup, this collection features high-quality components built for fitment, adjustability, and long-term performance. Shop Alignment Components by Category Browse alignment parts and suspension geometry upgrades across popular product categories, including: Alignment kits Camber kits Caster kits Adjustable control arms Upper control arms Rear toe links and toe arms Shock mounts and camber plates Alignment correction components Suspension geometry upgrades Vehicle-specific alignment hardware These parts are designed to help improve wheel alignment settings, reduce uneven tire wear, increase stability,...
View Alignment Components Products
Control Arms
Control arms are the key suspension linkages that connect the wheel hub and knuckle assembly to the vehicle frame, controlling wheel travel through both compression and droop cycles. Worn OEM control arms with loose ball joints or deteriorated bushings cause vague steering, tire wear, and handling inconsistency that only go away with replacement or upgrade.Popular UpgradesTubular steel upper control arms for lifted trucks and SUVs are the most popular upgrade in the control arm category, correcting the geometry compromised by a suspension lift and restoring proper caster angle and ball joint centering. Adjustable upper control arms allow alignment angles like caster and camber to be dialed in precisely after a lift or lowering modification. Replacement lower control arms with polyurethane or solid aluminum bushings improve response and longevity compared to worn OEM rubber mounts.Why do I need new control arms after a lift kit?A suspension lift changes the angle at which the OEM upp...
View Control Arms Products
SuperPro
Discover the SuperPro collection, where innovation meets performance. Our range of polyurethane bushings is designed to enhance the driving experience of your passenger car or 4WD. With SuperPro, you can expect: Improved Road Holding: Achieve better control and stability on the road. Enhanced Handling: Experience superior responsiveness during cornering. Reduced Tyre Wear: Maintain optimal tyre alignment under various driving conditions. Minimal NVH Impact: Enjoy a smoother ride thanks to carefully engineered designs by our R & D technicians. Why Choose SuperPro? SuperPro products are not mere replicas of original equipment (OE) rubber components; they are meticulously crafted from the ground up. Our polyurethane bushings leverage the unique properties of polyurethane to provide the following benefits: Design-Engineered: Each product is developed through a professional research and development program. Industry Expertise: Backed by years of hands-on experience in auto...
View SuperPro Products
Suspension
Aftermarket suspension systems improve handling, ride quality, and ride height adjustment beyond what the factory suspension provides. From lowering springs and coilover kits for sport handling to lift kits and leveling kits for truck and SUV off-road capability, quality suspension components transform how a vehicle rides and handles. Popular Suspension Upgrades Popular suspension upgrades include coilover kits for adjustable ride height and damping, sport lowering springs for improved handling and reduced body roll, performance shock absorbers and strut assemblies, sway bar and end link upgrade kits, subframe brace kits, and complete suspension packages for lifted trucks and off-road SUVs. Alignment kits including camber bolts and camber arms are also frequently ordered after ride height changes. What is the difference between coilovers and lowering springs? Coilovers are complete shock and spring assemblies with adjustable ride height set by threading the spring perch on the shock...
View Suspension ProductsLet customers speak for us
Looks pretty nice
Looks pretty nice, pricing was good and the reinforcement is a big plus.
Randy H.
Black Ops Auto Works
I emailed customer service to inquire about when it would be shipped
I emailed customer service to inquire about when it would be shipped. They checked and emailed me with the answer. Customer service is A1
Ralph J.
Black Ops Auto Works
Installation was easy
Installation was easy. The price is good and it looks great on the truck.
Ralph J.
RHO Small Grille Badge
Looks as good as it fits
Looks as good as it fits,
zachary d.
Seibon 70-73 Datsun 240Z OE Carbon Fiber Hood
Nothing like it
I love it great sound and response
Luis P.
Legmaker Dodge Durango HEMI Short Ram CAI 2011-Present 5.7L
Car totally diferent with the whole kit
Car totally diferent with the whole kit. Ive stood next to wide bodies and my car gets more attention at times . Ive bought the kit twice already.
Ding D.
2015-2023 Dodge Charger Carbon Fiber Wind Splitters
Fantastic emblem! Exactly what I was looking for
Fantastic emblem! Exactly what I was looking for. Great quality emblem.
Jacobus S.
Direct Connection Black Metallic Fender Badge
Worked great for my aftermarket hood on my Chrysler 2023 300C
Worked great for my aftermarket hood on my Chrysler 2023 300C. Thanks
Robert G.
Windshield Washer Squirter Relocation Kit Universal
Easy to install and makes car sound even better
Easy to install and makes car sound even better love the winn
Tracy H.
Legmaker Challenger/Charger Hellcat Demon & Redeye Air Intake
Awesome customer support
Awesome customer support. Had multiple issues with fedex and these guys were excellent in helping me sort everything out. The drop springs are great too! I highly recommend
Anonymous
Swift Spec-R Lowering springs Jeep Grand Cherokee 2011-2021
100/100! perfect CF crafted cold air intake for 6
100/100! perfect CF crafted cold air intake for 6.4 jeep .. even makes my AWE exhaust sound even deeper and you cam here this thing sucking when accelerating even at normal speeds🥶
srt.boizzz
Legmaker 392 TH Short Ram Jeep Grand Cherokee SRT 2012-2021
