Torque Solution Pendulum (Dog Bone) Billet Insert 09-14 VW MK6 TSI / 09-14 Audi TT/TTS/A3

Explore Audi A3 parts with attention to generation, body style, engine and drivetrain. Compare intake, exhaust, brake and suspension-service applications against your exact configuration. Match the A3 Generation and Powertrain Identify the chassis generation, model year, body, engine code and transmission. Record front-wheel drive or quattro, and distinguish gasoline, diesel and plug-in hybrid applications where relevant. A3 hatchback, sedan and cabriolet components should be checked individually. Include production-date restrictions and any intake, turbo, brake or suspension changes. Similar Audi/VW platform names are useful search details, but the full manufacturer application must match the installed vehicle and assembly. Intake and Exhaust Selection The selection includes an AWE 8P A3 front-wheel-drive resonated cat-back exhaust. Confirm that specific drivetrain, body, engine and connection layout before ordering. An 8P FWD application does not establish coverage for quattro or ...

Find Audi TT parts by generation, engine and drivetrain. Intake, crankshaft-damper and brake applications can distinguish early 1.8T cars from later engines and front-wheel drive from quattro. Engine and Intake Details An early TT intake application can specify the 180 hp engine configuration. Match the engine code, airflow-meter connection, inlet routing and supplied hardware rather than assuming every 1.8T setup uses the same kit. Crankshaft dampers have engine-specific mounting patterns. Fluidampr applications distinguish four-bolt and six-bolt arrangements among engine families; verify the exact engine, pulley arrangement and supplied installation requirements. Drivetrain and Brake Configuration Suspension components can exclude quattro applications. Establish front-wheel drive or quattro before selecting mounts, boots or other chassis parts, and check the axle and suspension configuration. For brakes, identify caliper, rotor dimensions and pad shape before choosing a street or ...

Choose Audi TT quattro parts around the all-wheel-drive chassis and exact engine application. Induction components, dampers and brake equipment need generation-specific coverage. Intake Connections and Engine Hardware TT quattro applications span different engines and intake arrangements. Early intake references may specify a 180 hp configuration, while later turbo-inlet applications depend on engine generation and the installed turbo connection. For crankshaft dampers, match engine code, mounting pattern and pulley layout. A 1.8T, 2.0 FSI/TSI or other engine reference does not establish a common damper assembly. All-Wheel-Drive Chassis and Brakes Use quattro-specific coverage for drivetrain and suspension service. Record transmission, installed shaft components and suspension type where those details are part of the manufacturer’s application. Match rotors, pads and hardware by axle, caliper and dimensions. For a modified brake setup, the installed caliper and rotor assembly take p...

Explore Audi TTS quattro parts for the 2.0T engine and all-wheel-drive chassis. Match induction and engine hardware to the exact generation, and build brake-service choices around the installed equipment. Engine and Induction Details Turbo-inlet and breather-filter applications depend on engine generation and connection layout. Compare the existing turbo inlet, intake housing and ventilation fittings with the manufacturer’s required setup. A crankshaft damper needs the correct engine and mounting arrangement. Verify bolt pattern, pulley layout and installation hardware rather than selecting a part from a broad TSI reference alone. Brakes and Chassis Service Choose a rotor-and-pad kit by caliper, rotor diameter and thickness, pad shape and axle. Confirm exactly what a kit contains, including whether sensors and fitting hardware are supplied. For chassis work, use TTS quattro coverage and record the suspension equipment. Electronic damping or previous suspension changes can affect the...

Drivetrain parts for high-horsepower Mopar, truck, Jeep, and import platforms are stocked at Black Ops Auto Works. Shop differentials, axles, driveshafts, clutch kits, flywheels, flexplates, shifters, transmission components, ring and pinion gears, differential braces, and driveline hardware for Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and turbocharged import platforms. Every drivetrain part is filterable by vehicle platform, drivetrain layout, transmission type, and power level so the correct part ships the first time. Black Ops Auto Works carries 4,765 drivetrain SKUs across differentials, axles, clutches, and transmission hardware. What This Category Covers The drivetrain transfers power from the engine to the wheels and includes the transmission, clutch, driveshafts, axles, differentials, ring and pinion gears, wheel hubs, wheel bearings, U-joints, shifters, mounts, and bushings. Upgrading these components improves power delivery, durability, and reliability under incr...

Shop Torque Solution performance parts by exact manufacturer part number and verified application. The catalog includes billet engine and transmission mounts, shifter components, suspension hardware, turbo-system adapters, hoses, thermal products, tools, and related installation components.Torque Solution Products Engine, transmission, differential, and pitch-stop mounts Shifter bushings, short shifters, shift knobs, and drivetrain hardware Suspension, steering, brake, intake, exhaust, and turbo-system components Universal fittings, flanges, clamps, hoses, thermal products, and tools Choose Your PartMatch the complete manufacturer part number, vehicle year, make, model, transmission or engine requirement, dimensions, mounting interface, material, finish, and every current Torque Solution note. Universal components must be selected by exact size, thread, flange, hose, or fabrication requirement.About Torque SolutionTorque Solution develops application-specific and universal performan...

Transmission Mounts parts and accessories are stocked at Black Ops Auto Works. Transmission mounts support the gearbox and control drivetrain movement under acceleration, braking and shifting. Shop urethane, billet, solid and OE replacement transmission mounts, inserts, bushings and supports for Subaru WRX, Ford, Chevrolet, Nissan, Volkswagen, Audi, Toyota, Porsche and other street and track builds. Every product is filterable by year, make, model, trim, engine and drivetrain where applicable, so the correct part ships the first time. Black Ops Auto Works carries 65 Transmission Mounts SKUs across the performance and replacement parts needed for a focused build. What This Transmission Mounts Collection Covers This collection covers direct replacement mounts, firmer performance mounts, transmission crossmember bushings, pitch mounts and mount inserts. A tired mount can allow excessive drivetrain movement, increase shift inconsistency and create unwanted contact between the transm...

Transmission and drivetrain hardware for manual and automatic platforms are stocked at Black Ops Auto Works. Shop flywheels, flexplates, transmission crossmembers, mounts, coolers, valve bodies, shifters, shifter bushings, release bearings, slave cylinders, U-joints, and transmission rebuild kits for Subaru WRX and STI, Dodge Cummins diesel, GM G-Body and F-Body, BMW B58 and S58, Nissan 350Z, and Toyota GR Corolla platforms. Every part is filterable by year, make, model, and transmission type so builders can confirm the correct fitment before ordering. Black Ops Auto Works carries 1,322 transmission and drivetrain SKUs. What This Category Covers This collection spans the hardware that connects the engine to the drivetrain and manages gear selection, including flywheels, flexplates, transmission crossmembers, bell housings, transmission mounts, pans, coolers, filters, valve bodies, transmission internals, shifters, shifter bushings and cables, release bearings, slave cylinders, U...

Find Volkswagen Beetle cabin, exterior and engine-accessory applications by exact generation and engine. Keep classic, New Beetle and later body requirements distinct. Generation-Specific Cabin and Window Fit Classic stainless window shades and later outside-mounted deflectors have different body/year coverage. Confirm window geometry and mounting design. Front liners require exact cabin contours and retention points. A shared Golf/Jetta reference needs precise Beetle manufacturer support. Engine, Damper and Suspension Applications The displayed 1.8T four-bolt damper and later TSI references are separate applications. Match actual engine, crank attachment and accessory-drive arrangement. Diesel intakes, throttle controllers and helper springs require their own engine, connector or mounting coverage. Do not extend Golf/EOS/GTI naming to every Beetle configuration. Choose Your Part Identify generation, body and actual engine. Match liner retention and window geometry. Confirm exact d...

Find Volkswagen CC intake, damper, fuel and brake applications by exact engine and production. Separate TSI and VR6 requirements before choosing shared Audi/VW references. Engine and Fuel-System Interfaces A GTI intake needs exact CC engine, sensor, turbo/inlet and mounting support. Dampers separately require matching crank attachment and accessory-drive configuration. VR6 12-valve injector references need the actual engine, fuel rail, connector and calibration support. Honda or Subaru injector headings are not evidence of CC compatibility. Brakes and Suspension Accessories Match rotor diameter/thickness, caliper and axle before choosing a Talon or other rotor. Confirm exact manufacturer part-number coverage. EOS/GTI helper springs require independent CC spring/mount support. Pedal controllers need exact vehicle/connector and selected control-kit coverage. Choose Your Part Identify production and actual TSI/VR6 engine. Match intake/damper and fuel-system interfaces. Confirm injecto...

Find Volkswagen Eos engine-accessory, brake and suspension applications by exact production and engine. Confirm FSI, TSI and other engine configurations independently. Crank and Pulley Interfaces Six-bolt FSI, later TSI and other damper references require exact engine/crank support. Match pulley alignment, accessory drive and required installation hardware. Do not extend a broad Golf/Passat/Audi title to every Eos engine. Use actual engine code and current component identification. Brakes and Helper-Spring Applications Confirm caliper, rotor dimensions and axle for every included pad/rotor kit component. Another VW/Audi heading needs exact manufacturer coverage. Helper springs and protective boots need correct mount, position and dimensions. Review actual suspension and complete package contents before planning installation. Choose Your Part Identify production and actual engine code. Match crank attachment and accessory-drive configuration. Verify all brake-kit caliper/rotor appli...

Shop Volkswagen Golf exhaust, intake and cabin-service applications by exact generation, engine and body. Keep 1.8T, 2.0T, 2.5-litre and diesel requirements separate. Engine-Specific Exhaust and Intake A 2.5-litre Golf/Rabbit exhaust and a Mk7 1.8T system are different applications. Match the engine, body and current connection points before comparing sound or finish. Intakes need exact sensor, turbo or naturally aspirated routing support. An ALH TDI reference should not be extended to gasoline engines. Damper and Cabin Interfaces Dampers require matching crank attachment, pulley and accessory drive. Confirm exact engine generation and manufacturer part number. Front liners need correct cabin contours, retention points and body/year coverage. Shared Beetle/Jetta naming does not establish every Golf interior fit. Choose Your Part Identify generation, engine and body configuration. Match exhaust and intake engine-specific interfaces. Confirm crank/pulley and complete damper applicati...

Shop Volkswagen GTI exhaust systems and conversion kits by Mk6, Mk7, Mk7.5 or Mk8 generation. Choose the sound configuration first, then the compatible tip finish and system contents. Touring or Track Exhaust Touring and Track offer different sound-control configurations. Compare cabin sound at cruising speed as well as acceleration, especially when the car already has an aftermarket downpipe. Match the engine, generation and rear bumper/outlet layout before ordering. A Mk7.5 system and a Mk8 system should not be selected solely because both carry GTI branding. Changing an Existing AWE System Track-to-Touring and Touring-to-Track kits change a compatible existing exhaust. Identify its manufacturer part number and the direction of the conversion. Check which sections and hardware are supplied and retained. A conversion kit is not a complete cat-back, and chrome or black tips do not determine chassis compatibility. Choose Your Part Identify GTI generation, engine and current downpipe...

Shop Volkswagen Jetta exhaust and cabin accessories by generation, body and engine. Keep GLI, 1.4T, 1.8T and 2.5-litre applications separate when comparing systems. Engine and GLI Exhaust Choices A Mk6 1.4T exhaust, a GLI 2.0T system and a 2.5-litre application have different requirements. Use the full manufacturer part number to confirm year, engine and body coverage. Compare Touring and Track sound configuration after establishing fit. For systems specifying an original downpipe, confirm the current exhaust connection before purchase. Conversion Kits and Cabin Coverage Touring-to-Track or Track-to-Touring sections require the matching starting exhaust. Check retained parts and conversion direction rather than treating the kit as a complete system. Floor liners need exact sedan or wagon coverage, cabin contours and retention points. A front-row set does not establish rear-row protection or fit in a different body. Choose Your Part Identify generation, sedan/wagon body and actual e...

Shop Volkswagen Passat engine-accessory, intake and cabin applications by production, engine and sedan or wagon body. Confirm the current powertrain and suspension equipment before selecting shared Volkswagen parts. Engine, Intake and Damper Interfaces A 2.5-litre intake and a Gen3 turbo inlet require different engine and air-path applications. Match sensors, hoses, turbo connection and mounting points. FSI six-bolt and TSI damper references require the correct engine/crank interface, accessory-drive alignment and installation hardware. Use the actual engine code when checking coverage. Mounts, Helper Springs and Liners A drivetrain stabilizer’s rubber or polyurethane configuration affects its intended setup. Confirm the exact mount location, application and supplied components. Helper springs need exact body and suspension coverage; wagon-specific support should not be extended to every sedan. Floor liners need matching cabin contours, retention points and row coverage. Choose Your...

Shop Volkswagen Rabbit exhaust, intake and service applications using generation, engine and body details. Keep 2.5-litre air-intake requirements separate from older Rabbit applications. 2.5-Litre Exhaust and Intake Choices The displayed Golf/Rabbit 2.5-litre exhaust needs the correct engine and body application. Review connection points, supplied sections and sound configuration. Intake options have different year and sensor requirements, including a no-MAF application. Confirm the actual air-metering arrangement, hoses and mounting before choosing a finish. Older Brake and Suspension Applications Wheel cylinders and master cylinders need exact chassis, bore, port and brake-system support. Pickup-specific hydraulic listings should not be assumed to fit every Rabbit body. Mounts and boots require matching suspension position, dimensions and production coverage. Check whether the package includes a mount, protective components or a complete assembly. Choose Your Part Identify genera...