-25%
Sold out
Click to zoom in
SKU: 18324 | UPC: 690092185671
Universal Fit Vibrant 120 Degree Mandrel Bend 1.75in OD x 4in CLR 304 Stainless Steel Tubing
This Vibrant Performance 120 degree mandrel bend features 1.75 inch OD tubing with 4 inch centerline radius in 304 stainless steel for custom exhaust intercooler piping and intake manifolds on performance vehicles. Mandrel bending preserves the full tube diameter for unrestricted airflow and increased power output. Leg lengths of 3 inches by 8 inches allow precise routing in tight engine bays.
Key Features
- Mandrel Bent Design: Preserves consistent 1.75 inch inside diameter across the entire 120 degree bend to support high-volume airflow without restrictions
- 304 Stainless Steel Material: Resists corrosion heat and road contaminants for long-term durability in exhaust applications
- 4 Inch Centerline Radius: Provides tight bend capability for compact routing in engine bays while keeping flow velocity high
- 16 Gauge Wall Thickness (0.065 inch): Delivers structural strength with minimal weight addition to the overall system
- Leg Lengths 3 inch x 8 inch: Standard sizing integrates easily into fabrication projects with short leg on one side and extended leg on the other
Product Notes
- Inspect dimensions prior to cutting or welding to match your specific piping layout
- Debur ends after any trimming for clean weld joints and leak-free performance
- Packaged securely to arrive undamaged ready for immediate fabrication use
Installation Notes
- Professional installation recommended.
- TIG welding required for stainless steel to achieve strong leak-proof joints
- Works with butt welds V-band clamps or slip joints based on your piping setup
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| Universal | All | Custom Fabrication | Exhaust Intake Piping |
Why Choose Vibrant Performance?
- Established leader in performance tubing and exhaust components
- Consistent quality control in every mandrel bent piece
- Broad range of angles from 15 to 180 degrees and sizes 1 to 5 inches
Frequently Asked Questions
-
Q: What vehicles does this mandrel bend fit?
A: Universal design works for custom exhaust intake or intercooler piping on any performance vehicle during fabrication -
Q: What is the exact material and thickness?
A: Constructed from 304 grade stainless steel with 16 gauge 0.065 inch wall thickness for heat and corrosion resistance -
Q: What warranty coverage applies?
A: Vibrant Performance provides limited lifetime warranty against manufacturing defects when installed correctly
Shipping & Handling
- Method: UPS Ground
- Availability: In stock - ships same or next business day
- Packaging: Protective cardboard box 10 x 6 x 6 inches
- Weight: 1 lb
Fabrication
Shop Fabrication Parts and Materials at Black Ops Auto Works for stainless steel tubing, titanium tubing, aluminum charge piping, mandrel bends, V-band clamps, flanges, merge collectors, AN fittings, PTFE hose kits, braided fuel and oil lines, heat shields, welding supplies, brackets, bungs, and hardware for building custom exhaust systems, turbo plumbing, intercooler piping, and fuel system routing. Start with tubing in stainless, titanium, or aluminum in the right diameter and wall thickness, then add mandrel bends, flanges, V-bands, and clamps to complete the joint work. Black Ops Auto Works carries 5,866 fabrication SKUs from Vibrant Performance, Ticon Industries, Stainless Bros, Radium Engineering, Fragola, DEI, and ATP Turbo. Why Custom Fabrication Custom fabrication solves fitment problems that no universal or pre-bent kit can address. Raw tubing, flanges, and fittings give the fabricator freedom to route exhaust around a turbo, snake charge pipe around accessories, hard-...
View Fabrication Products
Steel Tubing
Steel tubing and stainless mandrel bends for custom exhaust fabrication, roll cage builds, and turbo piping projects are stocked at Black Ops Auto Works. Shop mandrel bends, pie cuts, straight tubing, weld elbows, U-bends, J-bends, and v-band tubing sections in mild steel, 304 stainless, 321 stainless, and aluminum for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, EcoBoost, K-series, 2JZ, and import turbo builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 440 steel tubing SKUs across bend angle, diameter, wall gauge, and material categories. What This Category Covers The Steel Tubing collection is built for fabricators, exhaust shops, and DIY builders who need raw mandrel-bent and straight tubing sections rather than a bolt-on kit. The catalog is strongest on Stainless Bros, Vibrant, and Ticon Industries tubing in the diameters most common for custom exhaust and turbo pipi...
View Steel Tubing Products
Vibrant
Vibrant Performance parts for custom exhaust, turbo builds, and fabrication projects are stocked at Black Ops Auto Works. Shop clamps, V-band flanges, mandrel bends, silicone couplers, wideband bungs, catalytic converters, resonators, tips, mufflers, oil catch cans, AN fittings, hoses, wastegate flanges, and fuel system fittings for street, race, drift, and off-road builds. Every product is filterable by size, material, and fitting type so the correct part ships the first time. Black Ops Auto Works carries 3,096 Vibrant Performance SKUs across exhaust fabrication, forced induction plumbing, and fuel system hardware. What This Brand Covers Vibrant Performance manufactures exhaust and fabrication parts for DIY custom exhaust, turbo builds, and general fabrication work. The catalog spans stainless mandrel bends and V-band flanges for exhaust construction, silicone couplers and hump hoses for intercooler and intake plumbing, and AN fittings and PTFE hose for fuel and oil systems. Fa...
View Vibrant Products